Today's Message Index:
----------------------
1. 05:21 AM - Re: kiss TR1 (Keith.Miller@esa.int)
2. 06:06 PM - kiss TR1 (Wayne Ryalls)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Wayne,
for information in case you didnt already know, this Tr1 Kis started its
build life in Central England ( midlands) in 1994, with a guy called Sim
on
Barnard who had a lot of the basic original construction done by the
importer at that time Brian Davis. Eventually Simon sold the Kit to Steve
Moret in about 2005 . Who then emigrated to New Zeeland ( Northland ) with
the kit in about 2009. I lost touch with Steve just after that , so its
good to know the KIT is still around and hopefully will be completed one of
these days.
Keith
From: "Wayne Ryalls" <w.ryalls@gmail.com>
Subject: Re: KIS-List: kiss TR1
Sent by: owner-kis-list-server@matronics.com
Hi Graham,yes it's construction is about 3/4 done.wings are constructed to,
all needs filled and prepared for painting yet.I have 0235 lycoming engine
for it.
There is one other kr1 in nz,reg is, zk kiss.it has over- one k hours of
flying on it now.
Cheers Wayne.
On Sunday, 27 September 2020, Graham Brighton <gbrighton@skymesh.com.au>
wrote:
So ... do i understand that Construction of the Aircraft is about 80%
done ? ...-or is the Kit wing not started and the Contents is about 80%
present ? -..-Wondering is the Wing finished .. ? -and maybe mounte
d to the
Fuselage or ?
How about Engine Choice-... have decided .. not decided ?
Sorry if thats a lot of questions .. just that im in Victoria Oz ... and
there's not many TR1's in our region !! .. ( maybe NZ has a couple on your
Registry ? )
Graham.
.
From: Wayne Ryalls
Sent: Saturday, September 26, 2020 6:38 PM
To: kis-list@matronics.com
Subject: Re: KIS-List: kiss TR1
I am in New Zealand,cheers Wayne.
On Saturday, 26 September 2020, Wayne Ryalls <w.ryalls@gmail.com> wrote:
Hi Graham, thank you for your help,i purchased kr1 kiss which was about
80
percent complete from New.It needs front gear leg with spring etc and ju
st
a free other bits an pieces.
Cheers Wayne.
On Saturday, 26 September 2020, Graham Brighton <gbrighton@skymesh.com.a
u>
wrote:
Hi Wayne,
------------------ Where are locat
ed ? ... TR1 Nose Gear Leg is not the
same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle
Hendricks supplies-these units and is located USA .
Gullwing door Plexiglass replacements are available ... and sourced in
USA also .. supplier was identified in a Thread here not that long
ago .. so a little back tracking needed as off hand i dont recall .
Someone maybe can chime in with that info ?
So are you doing Repairs ? .. or needing missing parts for a TR1 proje
ct
or or ?
Cheers
Graham .. TR1 80
.
From: Wayne Ryalls
Sent: Sunday, September 27, 2020 10:07 AM
To: kis-list@matronics.com
Subject: KIS-List: kiss TR1
Hi, Would any one have a front gear legg with sping, shockstrut- and
fittings to firewall for my TR1 kiss. I think same one-is used on fo
ur
seat kiss as well
i would be keen on any other TR1 parts.including-gullwing doors
and-plexyglass-door windows
.cheers wayne.
-------------------------
Virus-free.
www.avg.com
This message is intended only for the recipient(s) named above. It may cont
ain proprietary information and/or
protected content. Any unauthorised disclosure, use, retention or dissemina
tion is prohibited. If you have received
this e-mail in error, please notify the sender immediately. ESA applies app
ropriate organisational measures to protect
personal data, in case of data privacy queries, please contact the ESA Data
Protection Officer (dpo@esa.int).
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Keith, it's good to get more history on my kr1 kiss.
Kind regards, Wayne Ryalls.
On Tuesday, 29 September 2020, <Keith.Miller@esa.int> wrote:
> Wayne,
>
> for information in case you didnt already know, this Tr1 Kis started
> its build life in Central England ( midlands) in 1994, with a guy called
> Simon Barnard who had a lot of the basic original construction done by the
> importer at that time Brian Davis. Eventually Simon sold the Kit to Steve
> Moret in about 2005 . Who then emigrated to New Zeeland ( Northland )
> with the kit in about 2009. I lost touch with Steve just after that , so
> its good to know the KIT is still around and hopefully will be completed
> one of these days.
>
> Keith
>
>
> [image: Inactive hide details for "Wayne Ryalls" ---26/09/2020
> 21:13:44---Hi Graham,yes it's construction is about 3/4 done.wings are c]"Wayne
> Ryalls" ---26/09/2020 21:13:44---Hi Graham,yes it's construction is about
> 3/4 done.wings are constructed to, all needs filled and pre
>
> From: "Wayne Ryalls" <w.ryalls@gmail.com>
> To: "kis-list@matronics.com" <kis-list@matronics.com>
> Date: 26/09/2020 21:13
> Subject: Re: KIS-List: kiss TR1
> Sent by: owner-kis-list-server@matronics.com
> ------------------------------
>
>
> Hi Graham,yes it's construction is about 3/4 done.wings are constructed
> to, all needs filled and prepared for painting yet.I have 0235 lycoming
> engine for it.
> There is one other kr1 in nz,reg is, zk *kiss.it* <http://kiss.it/> has
> over one k hours of flying on it now.
> Cheers Wayne.
>
> On Sunday, 27 September 2020, Graham Brighton <*gbrighton@skymesh.com.au*
> <gbrighton@skymesh.com.au>> wrote:
>
> So ... do i understand that Construction of the Aircraft is about 80%
> done ? ... or is the Kit wing not started and the Contents is about 80%
> present ? .. Wondering is the Wing finished .. ? and maybe mounted to the
> Fuselage or ?
> How about Engine Choice ... have decided .. not decided ?
> Sorry if thats a lot of questions .. just that im in Victoria Oz ...
> and there's not many TR1's in our region !! .. ( maybe NZ has a couple on
> your Registry ? )
> Graham.
>
> .
>
> *From:* *Wayne Ryalls* <w.ryalls@gmail.com>
> *Sent:* Saturday, September 26, 2020 6:38 PM
> *To:* *kis-list@matronics.com* <kis-list@matronics.com>
> *Subject:* Re: KIS-List: kiss TR1
>
> I am in New Zealand,cheers Wayne.
>
> On Saturday, 26 September 2020, Wayne Ryalls <*w.ryalls@gmail.com*
> <w.ryalls@gmail.com>> wrote:
> Hi Graham, thank you for your help,i purchased kr1 kiss which was
> about 80 percent complete from New.It needs front gear leg with spring
etc
> and just a free other bits an pieces.
> Cheers Wayne.
>
> On Saturday, 26 September 2020, Graham Brighton <
> *gbrighton@skymesh.com.au* <gbrighton@skymesh.com.au>> wrote:
> Hi Wayne,
> Where are located ? ... TR1 Nose Gear Leg is
> not the same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring
.
> Lyle Hendricks supplies these units and is located USA .
> Gullwing door Plexiglass replacements are available ... and
> sourced in USA also .. supplier was identified in a Thread here not
that
> long ago .. so a little back tracking needed as off hand i dont recall
.
> Someone maybe can chime in with that info ?
> So are you doing Repairs ? .. or needing missing parts for a TR1
> project or or ?
> Cheers
> Graham .. TR1 80
>
> .
>
>
> *From:* *Wayne Ryalls* <w.ryalls@gmail.com>
> *Sent:* Sunday, September 27, 2020 10:07 AM
> *To:* *kis-list@matronics.com* <kis-list@matronics.com>
> *Subject:* KIS-List: kiss TR1
>
> Hi, Would any one have a front gear legg with sping, shockstrut
> and fittings to firewall for my TR1 kiss. I think same one is used on
four
> seat kiss as well
> i would be keen on any other TR1 parts.including gullwing doors
> and plexyglass door windows
> .cheers wayne.
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> Virus-free. *www.avg.com* <http://www.avg.com/>
>
> <#m_-8891272405322150251_m_8213985700185518387_m_-6832599336062864760_m_-8919343956307204847_m_5045009832245058055_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>
> This message is intended only for the recipient(s) named above. It may contain
proprietary information and/or
> protected content. Any unauthorised disclosure, use, retention or dissemination
is prohibited. If you have received
> this e-mail in error, please notify the sender immediately. ESA applies appropriate
organisational measures to protect
> personal data, in case of data privacy queries, please contact the ESA Data Protection
Officer (dpo@esa.int).
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|