---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Mon 09/28/20: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:21 AM - Re: kiss TR1 (Keith.Miller@esa.int) 2. 06:06 PM - kiss TR1 (Wayne Ryalls) ________________________________ Message 1 _____________________________________ Time: 05:21:19 AM PST US Subject: Re: KIS-List: kiss TR1 From: Keith.Miller@esa.int Wayne, for information in case you didnt already know, this Tr1 Kis started its build life in Central England ( midlands) in 1994, with a guy called Sim on Barnard who had a lot of the basic original construction done by the importer at that time Brian Davis. Eventually Simon sold the Kit to Steve Moret in about 2005 . Who then emigrated to New Zeeland ( Northland ) with the kit in about 2009. I lost touch with Steve just after that , so its good to know the KIT is still around and hopefully will be completed one of these days. Keith From: "Wayne Ryalls" Subject: Re: KIS-List: kiss TR1 Sent by: owner-kis-list-server@matronics.com Hi Graham,yes it's construction is about 3/4 done.wings are constructed to, all needs filled and prepared for painting yet.I have 0235 lycoming engine for it. There is one other kr1 in nz,reg is, zk kiss.it has over- one k hours of flying on it now. Cheers Wayne. On Sunday, 27 September 2020, Graham Brighton wrote: So ... do i understand that Construction of the Aircraft is about 80% done ? ...-or is the Kit wing not started and the Contents is about 80% present ? -..-Wondering is the Wing finished .. ? -and maybe mounte d to the Fuselage or ? How about Engine Choice-... have decided .. not decided ? Sorry if thats a lot of questions .. just that im in Victoria Oz ... and there's not many TR1's in our region !! .. ( maybe NZ has a couple on your Registry ? ) Graham. . From: Wayne Ryalls Sent: Saturday, September 26, 2020 6:38 PM To: kis-list@matronics.com Subject: Re: KIS-List: kiss TR1 I am in New Zealand,cheers Wayne. On Saturday, 26 September 2020, Wayne Ryalls wrote: Hi Graham, thank you for your help,i purchased kr1 kiss which was about 80 percent complete from New.It needs front gear leg with spring etc and ju st a free other bits an pieces. Cheers Wayne. On Saturday, 26 September 2020, Graham Brighton wrote: Hi Wayne, ------------------ Where are locat ed ? ... TR1 Nose Gear Leg is not the same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle Hendricks supplies-these units and is located USA . Gullwing door Plexiglass replacements are available ... and sourced in USA also .. supplier was identified in a Thread here not that long ago .. so a little back tracking needed as off hand i dont recall . Someone maybe can chime in with that info ? So are you doing Repairs ? .. or needing missing parts for a TR1 proje ct or or ? Cheers Graham .. TR1 80 . From: Wayne Ryalls Sent: Sunday, September 27, 2020 10:07 AM To: kis-list@matronics.com Subject: KIS-List: kiss TR1 Hi, Would any one have a front gear legg with sping, shockstrut- and fittings to firewall for my TR1 kiss. I think same one-is used on fo ur seat kiss as well i would be keen on any other TR1 parts.including-gullwing doors and-plexyglass-door windows .cheers wayne. ------------------------- Virus-free. www.avg.com This message is intended only for the recipient(s) named above. It may cont ain proprietary information and/or protected content. Any unauthorised disclosure, use, retention or dissemina tion is prohibited. If you have received this e-mail in error, please notify the sender immediately. ESA applies app ropriate organisational measures to protect personal data, in case of data privacy queries, please contact the ESA Data Protection Officer (dpo@esa.int). ________________________________ Message 2 _____________________________________ Time: 06:06:41 PM PST US From: Wayne Ryalls Subject: KIS-List: kiss TR1 Hi Keith, it's good to get more history on my kr1 kiss. Kind regards, Wayne Ryalls. On Tuesday, 29 September 2020, wrote: > Wayne, > > for information in case you didnt already know, this Tr1 Kis started > its build life in Central England ( midlands) in 1994, with a guy called > Simon Barnard who had a lot of the basic original construction done by the > importer at that time Brian Davis. Eventually Simon sold the Kit to Steve > Moret in about 2005 . Who then emigrated to New Zeeland ( Northland ) > with the kit in about 2009. I lost touch with Steve just after that , so > its good to know the KIT is still around and hopefully will be completed > one of these days. > > Keith > > > [image: Inactive hide details for "Wayne Ryalls" ---26/09/2020 > 21:13:44---Hi Graham,yes it's construction is about 3/4 done.wings are c]"Wayne > Ryalls" ---26/09/2020 21:13:44---Hi Graham,yes it's construction is about > 3/4 done.wings are constructed to, all needs filled and pre > > From: "Wayne Ryalls" > To: "kis-list@matronics.com" > Date: 26/09/2020 21:13 > Subject: Re: KIS-List: kiss TR1 > Sent by: owner-kis-list-server@matronics.com > ------------------------------ > > > Hi Graham,yes it's construction is about 3/4 done.wings are constructed > to, all needs filled and prepared for painting yet.I have 0235 lycoming > engine for it. > There is one other kr1 in nz,reg is, zk *kiss.it* has > over one k hours of flying on it now. > Cheers Wayne. > > On Sunday, 27 September 2020, Graham Brighton <*gbrighton@skymesh.com.au* > > wrote: > > So ... do i understand that Construction of the Aircraft is about 80% > done ? ... or is the Kit wing not started and the Contents is about 80% > present ? .. Wondering is the Wing finished .. ? and maybe mounted to the > Fuselage or ? > How about Engine Choice ... have decided .. not decided ? > Sorry if thats a lot of questions .. just that im in Victoria Oz ... > and there's not many TR1's in our region !! .. ( maybe NZ has a couple on > your Registry ? ) > Graham. > > . > > *From:* *Wayne Ryalls* > *Sent:* Saturday, September 26, 2020 6:38 PM > *To:* *kis-list@matronics.com* > *Subject:* Re: KIS-List: kiss TR1 > > I am in New Zealand,cheers Wayne. > > On Saturday, 26 September 2020, Wayne Ryalls <*w.ryalls@gmail.com* > > wrote: > Hi Graham, thank you for your help,i purchased kr1 kiss which was > about 80 percent complete from New.It needs front gear leg with spring etc > and just a free other bits an pieces. > Cheers Wayne. > > On Saturday, 26 September 2020, Graham Brighton < > *gbrighton@skymesh.com.au* > wrote: > Hi Wayne, > Where are located ? ... TR1 Nose Gear Leg is > not the same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring .. > Lyle Hendricks supplies these units and is located USA . > Gullwing door Plexiglass replacements are available ... and > sourced in USA also .. supplier was identified in a Thread here not that > long ago .. so a little back tracking needed as off hand i dont recall .. > Someone maybe can chime in with that info ? > So are you doing Repairs ? .. or needing missing parts for a TR1 > project or or ? > Cheers > Graham .. TR1 80 > > . > > > *From:* *Wayne Ryalls* > *Sent:* Sunday, September 27, 2020 10:07 AM > *To:* *kis-list@matronics.com* > *Subject:* KIS-List: kiss TR1 > > Hi, Would any one have a front gear legg with sping, shockstrut > and fittings to firewall for my TR1 kiss. I think same one is used on four > seat kiss as well > i would be keen on any other TR1 parts.including gullwing doors > and plexyglass door windows > .cheers wayne. > > > > Virus-free. *www.avg.com* > > <#m_-8891272405322150251_m_8213985700185518387_m_-6832599336062864760_m_-8919343956307204847_m_5045009832245058055_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > > This message is intended only for the recipient(s) named above. It may contain proprietary information and/or > protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received > this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect > personal data, in case of data privacy queries, please contact the ESA Data Protection Officer (dpo@esa.int). > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.