Today's Message Index:
----------------------
1. 11:03 AM - Suspending the fuselage for removal of the main gear (jeffbudner)
2. 11:20 AM - Re: Suspending the fuselage for removal of the main gear (Doug Crane)
3. 12:06 PM - Re: Suspending the fuselage for removal of the main gear (jeffbudner)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Suspending the fuselage for removal of the main gear |
Hi All, I have a need to remove the main gear of my TR-1. In searching the archives,
I found one thread that suggests supporting the plane at the wing roots.
I've also considered strapping the fuselage and lifting with a hoist, assuming
I can rent one that has a long enough arm. Are there other options that I haven't
considered?
Thanks much,
Jeff Budner
KIS TR-1 # 099
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=506333#506333
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Suspending the fuselage for removal of the main gear |
I did the following:
- traced the airfoil shape from the wing tip on a 2x8 board
- cut out the airfoil shape
- used that as a template to cut 3 more 2x8 boards for a total of 4 (2
under each wing)
- put foam pool noodles on the boards where they=99ll be in contact w
ith the
bottom of the wings
- built vertical supports out of 2x4=99s
- lifted the 2x8=99s with an engine hoist and lift straps and attache
d to the
vertical supports with long screws (see photo)
- repeat for other side
-Doug Crane
KIS TR-4 N302KM
On Thu, Mar 17, 2022 at 13:04 jeffbudner <jeffbudner@gmail.com> wrote:
>
> Hi All, I have a need to remove the main gear of my TR-1. In searching
> the archives, I found one thread that suggests supporting the plane at th
e
> wing roots. I've also considered strapping the fuselage and lifting with
a
> hoist, assuming I can rent one that has a long enough arm. Are there othe
r
> options that I haven't considered?
>
> Thanks much,
>
> Jeff Budner
> KIS TR-1 # 099
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=506333#506333
>
>
===========
===========
===========
===========
===========
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Suspending the fuselage for removal of the main gear |
Thanks Doug, for the good idea and posting a pic, that makes for a good model to
follow.
Jeff Budner
KIS TR-1 # 099
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=506335#506335
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|