---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Thu 03/17/22: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:03 AM - Suspending the fuselage for removal of the main gear (jeffbudner) 2. 11:20 AM - Re: Suspending the fuselage for removal of the main gear (Doug Crane) 3. 12:06 PM - Re: Suspending the fuselage for removal of the main gear (jeffbudner) ________________________________ Message 1 _____________________________________ Time: 11:03:24 AM PST US Subject: KIS-List: Suspending the fuselage for removal of the main gear From: "jeffbudner" Hi All, I have a need to remove the main gear of my TR-1. In searching the archives, I found one thread that suggests supporting the plane at the wing roots. I've also considered strapping the fuselage and lifting with a hoist, assuming I can rent one that has a long enough arm. Are there other options that I haven't considered? Thanks much, Jeff Budner KIS TR-1 # 099 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=506333#506333 ________________________________ Message 2 _____________________________________ Time: 11:20:27 AM PST US From: Doug Crane Subject: Re: KIS-List: Suspending the fuselage for removal of the main gear I did the following: - traced the airfoil shape from the wing tip on a 2x8 board - cut out the airfoil shape - used that as a template to cut 3 more 2x8 boards for a total of 4 (2 under each wing) - put foam pool noodles on the boards where they=99ll be in contact w ith the bottom of the wings - built vertical supports out of 2x4=99s - lifted the 2x8=99s with an engine hoist and lift straps and attache d to the vertical supports with long screws (see photo) - repeat for other side -Doug Crane KIS TR-4 N302KM On Thu, Mar 17, 2022 at 13:04 jeffbudner wrote: > > Hi All, I have a need to remove the main gear of my TR-1. In searching > the archives, I found one thread that suggests supporting the plane at th e > wing roots. I've also considered strapping the fuselage and lifting with a > hoist, assuming I can rent one that has a long enough arm. Are there othe r > options that I haven't considered? > > Thanks much, > > Jeff Budner > KIS TR-1 # 099 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=506333#506333 > > =========== =========== =========== =========== =========== > > ________________________________ Message 3 _____________________________________ Time: 12:06:57 PM PST US Subject: KIS-List: Re: Suspending the fuselage for removal of the main gear From: "jeffbudner" Thanks Doug, for the good idea and posting a pic, that makes for a good model to follow. Jeff Budner KIS TR-1 # 099 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=506335#506335 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.