Today's Message Index:
----------------------
1. 07:00 PM - Re: Re: Suspending the fuselage for removal of the main gear (Galin Hernandez)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Suspending the fuselage for removal of the main gear |
FWIW; I installed a 2x10 board on an adjustable sawhorse. I then covered
the 2x10 board with thick moving blankets as padding. Then I lifted each
wing, put one sawhorse about where the main spar is under each wing and
lowered each wing down. This suspended the airplane so I could take the
landing gear off and made it impossible for the airplane to fall down. You
can see the setup in the attached pictures.
Remember to chock the front wheel during this procedure.
On Thu, Mar 17, 2022 at 3:08 PM jeffbudner <jeffbudner@gmail.com> wrote:
>
> Thanks Doug, for the good idea and posting a pic, that makes for a good
> model to follow.
>
> Jeff Budner
> KIS TR-1 # 099
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=506335#506335
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|