KIS-List Digest Archive

Wed 07/19/23


Total Messages Posted: 13



Today's Message Index:
----------------------
 
     1. 08:23 AM - Re: DYNON SkyView Roll Servo?? (GalinHdz)
     2. 08:34 AM - Re: Re: DYNON SkyView Roll Servo?? (Robert Reed)
     3. 08:49 AM - First Cross-country (Glenn)
     4. 09:05 AM - N343BS Cross-Country (Glenn)
     5. 09:29 AM - Re: First Cross-country (M Ketteing)
     6. 09:34 AM - Re: N343BS Cross-Country (Robert Reed)
     7. 10:13 AM - Re: N343BS Cross-Country (William Schertz)
     8. 11:16 AM - Re: N343BS Cross-Country (Glenn)
     9. 11:19 AM - Re: DYNON SkyView Roll Servo?? (GalinHdz)
    10. 11:20 AM - Re: First Cross-country (GalinHdz)
    11. 11:22 AM - Re: N343BS Cross-Country (GalinHdz)
    12. 11:48 AM - Re: Re: DYNON SkyView Roll Servo?? (Robert Reed)
    13. 06:17 PM - Re: N343BS Cross-Country (Doug Crane)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:23:02 AM PST US
    Subject: Re: DYNON SkyView Roll Servo??
    From: "GalinHdz" <GalinHdz@gmail.com>
    So you used the SV-32 servo with the standard output arm? https://shop.dynon.com/products/sv32-servo-standard-output-arm?_pos=2&_sid=ce87eccb7&_ss=r Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511120#511120


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:34:22 AM PST US
    From: Robert Reed <robertr237@att.net>
    Subject: Re: DYNON SkyView Roll Servo??
    I used the SV32 but ordered the longer arms, cut and tapped to length needed after mounting servo. Bob Reed Sent from my iPhone > On Jul 19, 2023, at 10:23 AM, GalinHdz <GalinHdz@gmail.com> wrote: > > > So you used the SV-32 servo with the standard output arm? > > https://shop.dynon.com/products/sv32-servo-standard-output-arm?_pos=2&_sid=ce87eccb7&_ss=r > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=511120#511120 > > > > > > > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:49:27 AM PST US
    From: Glenn <dadmeyers1951@gmail.com>
    Subject: First Cross-country
    Finally got N343BS on a long trip after the new engine! Partner Bruno took it down in your area for the week, Galin. Glenn N343BS Flight Tracking and History - FlightAware <https://flightaware.com/live/flight/N343BS>


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:05:25 AM PST US
    From: Glenn <dadmeyers1951@gmail.com>
    Subject: N343BS Cross-Country
    Hoped for a little more speed; but not bad. Indicated AS 119K; True AS about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! Glenn


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:29:27 AM PST US
    From: M Ketteing <aeromomentum@yahoo.com>
    Subject: Re: First Cross-country
    How is the engine working? Did you do any modifications? Mark On Wednesday, 19 July 2023 at 11:52:18 am GMT-4, Glenn <dadmeyers1951@gmail.com> wrote: Finally got N343BS on a long trip after the new engine! Partner Bruno took it down in your area for the week, Galin. Glenn N343BS Flight Tracking and History - FlightAware


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:34:21 AM PST US
    From: Robert Reed <robertr237@att.net>
    Subject: Re: N343BS Cross-Country
    Glenn, Looked it up on Flight Aware and you were cooking along at a very nice clip .=C2- Looked great. Bob Reed On Wednesday, July 19, 2023 at 11:06:01 AM CDT, Glenn <dadmeyers1951@gm ail.com> wrote: Hoped for a little more speed; but not bad. Indicated AS 119K; True AS abou t 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! Glenn


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:13:47 AM PST US
    From: William Schertz <wschertz343@gmail.com>
    Subject: Re: N343BS Cross-Country
    Congratulations! Did you get the autopilot to work? On Wed, Jul 19, 2023 at 10:07=AFAM Glenn <dadmeyers1951@gmail.com> wr ote: > > Hoped for a little more speed; but not bad. Indicated AS 119K; True AS > about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno do es! > > Glenn > >


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:16:05 AM PST US
    From: Glenn <dadmeyers1951@gmail.com>
    Subject: Re: N343BS Cross-Country
    Yes! But, I didn't fix anything which of course bothers me. It started working when I took the mechanic up. We still have to adjust the LPV gain but all else seems good. Glenn On Wed, Jul 19, 2023, 12:15 PM William Schertz <wschertz343@gmail.com> wrote: > Congratulations! > Did you get the autopilot to work? > > On Wed, Jul 19, 2023 at 10:07=AFAM Glenn <dadmeyers1951@gmail.com> wrote: > >> >> Hoped for a little more speed; but not bad. Indicated AS 119K; True AS >> about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno d oes! >> >> Glenn >> >>


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:19:13 AM PST US
    Subject: Re: DYNON SkyView Roll Servo??
    From: "GalinHdz" <GalinHdz@gmail.com>
    Did you have to cut much? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511127#511127


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:20:22 AM PST US
    Subject: Re: First Cross-country
    From: "GalinHdz" <GalinHdz@gmail.com>
    And I was traveling (Puerto Rico) and just got back today!! :( Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511128#511128


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:22:20 AM PST US
    Subject: Re: N343BS Cross-Country
    From: "GalinHdz" <GalinHdz@gmail.com>
    FWIW, 140KTAS is right on the money for your engine/propeller combination. If you try to make it better you will probably only make it worse. Don't ask how I know. ;) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511129#511129


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:48:27 AM PST US
    From: Robert Reed <robertr237@att.net>
    Subject: Re: DYNON SkyView Roll Servo??
    Which time?=C2- My first attempt had everything interfering with somethi ng or so it seemed.=C2- Had to reposition the servo closer to the connect ion on the center stick but that required a move of a couple of inches.=C2 - Ended up cutting off about an inch or so if I remember correctly.=C2- =C2- What was supposed to be a couple hour job turned into a multiple day job. =C2- Especially so for the rudder servo which I mounted under the center console between the front and back seat.=C2- I won't tell you how many ex pletives I uttered during all of that, would need a computer to calculate. Anyway, everything is finally in place and proceeded to fight with the Dyno n System to get it to recognize the servos.=C2- Haven't had the chance to fly it yet. Bob On Wednesday, July 19, 2023 at 01:19:18 PM CDT, GalinHdz <galinhdz@gmai l.com> wrote: Did you have to cut much? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511127#511127 S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:17:05 PM PST US
    From: Doug Crane <craneplanes@gmail.com>
    Subject: Re: N343BS Cross-Country
    Same thing happened to me. My Dynon autopilot started working when I took my wife up. I didn=99t change anything significant except a new softw are load. I don=99t know -Doug On Wed, Jul 19, 2023 at 14:02 Glenn <dadmeyers1951@gmail.com> wrote: > Yes! But, I didn't fix anything which of course bothers me. It started > working when I took the mechanic up. We still have to adjust the LPV gain > but all else seems good. > Glenn > > On Wed, Jul 19, 2023, 12:15 PM William Schertz <wschertz343@gmail.com> > wrote: > >> Congratulations! >> Did you get the autopilot to work? >> >> On Wed, Jul 19, 2023 at 10:07=AFAM Glenn <dadmeyers1951@gmail.com> wrote: >> >>> >>> Hoped for a little more speed; but not bad. Indicated AS 119K; True AS >>> about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! >>> >>> Glenn >>> >>>




    Other Matronics Email List Services

  • Post A New Message
  •   kis-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/KIS-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kis-list
  • Browse KIS-List Digests
  •   http://www.matronics.com/digest/kis-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --