---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Wed 07/19/23: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:23 AM - Re: DYNON SkyView Roll Servo?? (GalinHdz) 2. 08:34 AM - Re: Re: DYNON SkyView Roll Servo?? (Robert Reed) 3. 08:49 AM - First Cross-country (Glenn) 4. 09:05 AM - N343BS Cross-Country (Glenn) 5. 09:29 AM - Re: First Cross-country (M Ketteing) 6. 09:34 AM - Re: N343BS Cross-Country (Robert Reed) 7. 10:13 AM - Re: N343BS Cross-Country (William Schertz) 8. 11:16 AM - Re: N343BS Cross-Country (Glenn) 9. 11:19 AM - Re: DYNON SkyView Roll Servo?? (GalinHdz) 10. 11:20 AM - Re: First Cross-country (GalinHdz) 11. 11:22 AM - Re: N343BS Cross-Country (GalinHdz) 12. 11:48 AM - Re: Re: DYNON SkyView Roll Servo?? (Robert Reed) 13. 06:17 PM - Re: N343BS Cross-Country (Doug Crane) ________________________________ Message 1 _____________________________________ Time: 08:23:02 AM PST US Subject: KIS-List: Re: DYNON SkyView Roll Servo?? From: "GalinHdz" So you used the SV-32 servo with the standard output arm? https://shop.dynon.com/products/sv32-servo-standard-output-arm?_pos=2&_sid=ce87eccb7&_ss=r Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511120#511120 ________________________________ Message 2 _____________________________________ Time: 08:34:22 AM PST US From: Robert Reed Subject: Re: KIS-List: Re: DYNON SkyView Roll Servo?? I used the SV32 but ordered the longer arms, cut and tapped to length needed after mounting servo. Bob Reed Sent from my iPhone > On Jul 19, 2023, at 10:23 AM, GalinHdz wrote: > > > So you used the SV-32 servo with the standard output arm? > > https://shop.dynon.com/products/sv32-servo-standard-output-arm?_pos=2&_sid=ce87eccb7&_ss=r > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=511120#511120 > > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 08:49:27 AM PST US From: Glenn Subject: KIS-List: First Cross-country Finally got N343BS on a long trip after the new engine! Partner Bruno took it down in your area for the week, Galin. Glenn N343BS Flight Tracking and History - FlightAware ________________________________ Message 4 _____________________________________ Time: 09:05:25 AM PST US From: Glenn Subject: KIS-List: N343BS Cross-Country Hoped for a little more speed; but not bad. Indicated AS 119K; True AS about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! Glenn ________________________________ Message 5 _____________________________________ Time: 09:29:27 AM PST US From: M Ketteing Subject: Re: KIS-List: First Cross-country How is the engine working? Did you do any modifications? Mark On Wednesday, 19 July 2023 at 11:52:18 am GMT-4, Glenn wrote: Finally got N343BS on a long trip after the new engine! Partner Bruno took it down in your area for the week, Galin. Glenn N343BS Flight Tracking and History - FlightAware ________________________________ Message 6 _____________________________________ Time: 09:34:21 AM PST US From: Robert Reed Subject: Re: KIS-List: N343BS Cross-Country Glenn, Looked it up on Flight Aware and you were cooking along at a very nice clip .=C2- Looked great. Bob Reed On Wednesday, July 19, 2023 at 11:06:01 AM CDT, Glenn wrote: Hoped for a little more speed; but not bad. Indicated AS 119K; True AS abou t 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! Glenn ________________________________ Message 7 _____________________________________ Time: 10:13:47 AM PST US From: William Schertz Subject: Re: KIS-List: N343BS Cross-Country Congratulations! Did you get the autopilot to work? On Wed, Jul 19, 2023 at 10:07=AFAM Glenn wr ote: > > Hoped for a little more speed; but not bad. Indicated AS 119K; True AS > about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno do es! > > Glenn > > ________________________________ Message 8 _____________________________________ Time: 11:16:05 AM PST US From: Glenn Subject: Re: KIS-List: N343BS Cross-Country Yes! But, I didn't fix anything which of course bothers me. It started working when I took the mechanic up. We still have to adjust the LPV gain but all else seems good. Glenn On Wed, Jul 19, 2023, 12:15 PM William Schertz wrote: > Congratulations! > Did you get the autopilot to work? > > On Wed, Jul 19, 2023 at 10:07=AFAM Glenn wrote: > >> >> Hoped for a little more speed; but not bad. Indicated AS 119K; True AS >> about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno d oes! >> >> Glenn >> >> ________________________________ Message 9 _____________________________________ Time: 11:19:13 AM PST US Subject: KIS-List: Re: DYNON SkyView Roll Servo?? From: "GalinHdz" Did you have to cut much? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511127#511127 ________________________________ Message 10 ____________________________________ Time: 11:20:22 AM PST US Subject: KIS-List: Re: First Cross-country From: "GalinHdz" And I was traveling (Puerto Rico) and just got back today!! :( Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511128#511128 ________________________________ Message 11 ____________________________________ Time: 11:22:20 AM PST US Subject: KIS-List: Re: N343BS Cross-Country From: "GalinHdz" FWIW, 140KTAS is right on the money for your engine/propeller combination. If you try to make it better you will probably only make it worse. Don't ask how I know. ;) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511129#511129 ________________________________ Message 12 ____________________________________ Time: 11:48:27 AM PST US From: Robert Reed Subject: Re: KIS-List: Re: DYNON SkyView Roll Servo?? Which time?=C2- My first attempt had everything interfering with somethi ng or so it seemed.=C2- Had to reposition the servo closer to the connect ion on the center stick but that required a move of a couple of inches.=C2 - Ended up cutting off about an inch or so if I remember correctly.=C2- =C2- What was supposed to be a couple hour job turned into a multiple day job. =C2- Especially so for the rudder servo which I mounted under the center console between the front and back seat.=C2- I won't tell you how many ex pletives I uttered during all of that, would need a computer to calculate. Anyway, everything is finally in place and proceeded to fight with the Dyno n System to get it to recognize the servos.=C2- Haven't had the chance to fly it yet. Bob On Wednesday, July 19, 2023 at 01:19:18 PM CDT, GalinHdz wrote: Did you have to cut much? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=511127#511127 S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ________________________________ Message 13 ____________________________________ Time: 06:17:05 PM PST US From: Doug Crane Subject: Re: KIS-List: N343BS Cross-Country Same thing happened to me. My Dynon autopilot started working when I took my wife up. I didn=99t change anything significant except a new softw are load. I don=99t know -Doug On Wed, Jul 19, 2023 at 14:02 Glenn wrote: > Yes! But, I didn't fix anything which of course bothers me. It started > working when I took the mechanic up. We still have to adjust the LPV gain > but all else seems good. > Glenn > > On Wed, Jul 19, 2023, 12:15 PM William Schertz > wrote: > >> Congratulations! >> Did you get the autopilot to work? >> >> On Wed, Jul 19, 2023 at 10:07=AFAM Glenn wrote: >> >>> >>> Hoped for a little more speed; but not bad. Indicated AS 119K; True AS >>> about 140K; GS 154K (tailwind). Seems I never get a tailwind but Bruno does! >>> >>> Glenn >>> >>> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.