KIS-List Digest Archive

Mon 09/18/23


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 03:45 PM - TR-4 Elevator Trim tab range of movement ()
     2. 04:33 PM - Re: TR-4 Elevator Trim tab range of movement (M Ketteing)
     3. 07:53 PM - Re: TR-4 Elevator Trim tab range of movement (Galin Hernandez)
     4. 08:05 PM - Re: TR-4 Elevator Trim tab range of movement (Glenn)
     5. 09:25 PM - Re: TR-4 Elevator Trim tab range of movement (William Schertz)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:45:51 PM PST US
    From: <mike@vision499.com>
    Subject: TR-4 Elevator Trim tab range of movement
    I just had the inspector here and he wants a spec on the range of movement for the elevator trim tab. Could you please let me know if you have that info or recorded the range that you have Thanks very much Mike


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:33:07 PM PST US
    From: M Ketteing <aeromomentum@yahoo.com>
    Subject: Re: TR-4 Elevator Trim tab range of movement
    I have never seen a specified range for the trim tab travel. Keep in mind t hat if you followed the plans for the trim tab size, they tend to be way un der what is needed. Most people end up extending the trim tab. Since control surfaces tend to be fairly effective and linear to about 25 t o 30 degrees, this is what I would try. Mark On Monday, 18 September 2023 at 06:48:35 pm GMT-4, <mike@vision499.com > wrote: <!--#yiv5716613747 filtered {}#yiv5716613747 filtered {}#yiv5716613747 p.y iv5716613747MsoNormal, #yiv5716613747 li.yiv5716613747MsoNormal, #yiv571661 3747 div.yiv5716613747MsoNormal {margin:0cm;font-size:11.0pt;font-family:"C alibri", sans-serif;}#yiv5716613747 span.yiv5716613747EmailStyle17 {font-fa mily:"Calibri", sans-serif;color:windowtext;}#yiv5716613747 .yiv5716613747M soChpDefault {font-family:"Calibri", sans-serif;}#yiv5716613747 filtered {} #yiv5716613747 div.yiv5716613747WordSection1 {}--> I just had the inspector here and he wants a spec on the range of movement for the elevator trim tab. Could you please let me know if you have that in fo or recorded the range that you have =C2- Thanks very much =C2- Mike =C2-


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:53:07 PM PST US
    From: Galin Hernandez <galinhdz@gmail.com>
    Subject: Re: TR-4 Elevator Trim tab range of movement
    Is he making this requirement up? I have never heard of an elevator trim tab range of motion spec. On Mon, Sep 18, 2023 at 6:47=AFPM <mike@vision499.com> wrote: > I just had the inspector here and he wants a spec on the range of movemen t > for the elevator trim tab. Could you please let me know if you have that > info or recorded the range that you have > > > Thanks very much > > > Mike > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:05:54 PM PST US
    From: Glenn <dadmeyers1951@gmail.com>
    Subject: Re: TR-4 Elevator Trim tab range of movement
    I don't think it's in the manual. But a lot is left to the builder. That's why they call it experimental. I can measure ours when I get home but not until Saturday. Glenn On Mon, Sep 18, 2023, 9:54 PM Galin Hernandez <galinhdz@gmail.com> wrote: > Is he making this requirement up? I have never heard of an elevator trim > tab range of motion spec. > > On Mon, Sep 18, 2023 at 6:47=AFPM <mike@vision499.com> wrote: > >> I just had the inspector here and he wants a spec on the range of >> movement for the elevator trim tab. Could you please let me know if you >> have that info or recorded the range that you have >> >> >> >> Thanks very much >> >> >> >> Mike >> >> >> >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:25:48 PM PST US
    From: William Schertz <wschertz343@gmail.com>
    Subject: Re: TR-4 Elevator Trim tab range of movement
    Glen Nothing was specified on what the range of motion for the *trim tab*. What I can tell you is that the little trim tab can have a big effect. On one flight with a passenger trim went way up because his big bunch of keys in his pocket kept activating the trim, and I had to use a lot of force to counter it. Flew much better when he quit sitting on it. With the electric servo driven trim, you are limited by the travel of the servo. During test period, I verified that I could overcome full up or down trim in case of runaway trim. On Mon, Sep 18, 2023 at 9:07=AFPM Glenn <dadmeyers1951@gmail.com> wro te: > I don't think it's in the manual. But a lot is left to the builder. That' s > why they call it experimental. I can measure ours when I get home but not > until Saturday. > Glenn > > On Mon, Sep 18, 2023, 9:54 PM Galin Hernandez <galinhdz@gmail.com> wrote: > >> Is he making this requirement up? I have never heard of an elevator trim >> tab range of motion spec. >> >> On Mon, Sep 18, 2023 at 6:47=AFPM <mike@vision499.com> wrote: >> >>> I just had the inspector here and he wants a spec on the range of >>> movement for the elevator trim tab. Could you please let me know if you >>> have that info or recorded the range that you have >>> >>> >>> >>> Thanks very much >>> >>> >>> >>> Mike >>> >>> >>> >>




    Other Matronics Email List Services

  • Post A New Message
  •   kis-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/KIS-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kis-list
  • Browse KIS-List Digests
  •   http://www.matronics.com/digest/kis-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --