Today's Message Index:
----------------------
1. 08:08 AM - Re: sight gauges (Lynn Matteson)
2. 08:35 AM - Re: Fabric Hole (Guy Buchanan)
3. 12:37 PM - Re: Spare GSC prop? (Floran Higgins)
4. 03:48 PM - Re: Spare GSC prop? (ron schick)
5. 04:53 PM - Re: Spare GSC prop? I have a spare :-) (Aerobatics@aol.com)
6. 05:24 PM - Re: Spare GSC prop? (Cudnohufsky's)
7. 06:19 PM - Re: Spare GSC prop? I have a spare :-) (Marwynne Kuhn)
8. 08:49 PM - WOW Thanks prop response! (ron schick)
9. 09:50 PM - Re: Spare GSC prop? (ron schick)
10. 10:58 PM - Re: Spare GSC prop? (jdmcbean)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: sight gauges |
--> Kitfox-List message posted by: Lynn Matteson <lynnmatt@jps.net>
I'll second the motion on John's sight gauges, Deke....they were a
breeze to install, and work well (in my limited use so far).
Lynn
On Tuesday, December 13, 2005, at 02:58 PM, kurt schrader wrote:
> --> Kitfox-List message posted by: kurt schrader
> <smokey_bear_40220@yahoo.com>
>
> Deke,
>
> There is an easier way. Call or e-mail John McB for
> his sight gauge mod. Look here:
>
> www.sportplanellc.com
>
> John has quite a list of parts now. Look under wing
> accessories for new tubing and sharp looking placards.
> These are softer tubes that should last a long time
> and not leak or get brittle. If they do, it is an
> easy tubing change instead of heat bending the hard
> stuff. The kit converts over to tubing fittings
> instead of those touchy compression fittings and holds
> the soft tubes in place for clear easy reading.
>
> kurt S. S-5/NSI turbo
>
> --- Fox5flyer <morid@northland.lib.mi.us> wrote:
>
>> I'm preparing to replace my S5 original acrylic
>> tubing sight gauges. They've been in service for 5
>> years now and have become somewhat discolored, but
>> no other problems. Looking at ACS catalog I find
>> two types of clear rigid tubing. One is "clear
>> extruded acrylic tubing" and the other is "clear PVC
>> rigid schedule 40". Does anyone know which one is
>> the correct one to order?
>> Also, is there a better way than using the clear
>> rigid stuff and having to bend it? I seem to
>> remember a thread where clear Tygon was used with
>> inserts to keep it from leaking. Any input before I
>> order would be muchly appreciated.
>> Thanks,
>> Deke
>> 25f, calm, clear in NE Michigan
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kitfox-List message posted by: Guy Buchanan <bnn@nethere.com>
At 08:03 PM 12/14/2005, you wrote:
>Thats thinking outside of the box Steve. Maybe he could make use of it, say
>a relief tube?
> Ron NB Ore
Hmmm. It IS in just the right spot. Of course, I'd have to retract before
landing. And there's always the problem with wind chill; I'd have to
install an OAT to ensure against frostbite. :-o
Guy Buchanan
K-IV 1200 / 582 / 99.9% done, thanks mostly to Bob Ducar.
Do not archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Spare GSC prop? |
--> Kitfox-List message posted by: "Floran Higgins" <cliffh@outdrs.net>
What engine are you running?
I have a 3 bladed GSC prop for a 912 UL.
Floran H.
----- Original Message -----
From: "ron schick" <roncarolnikko@hotmail.com>
Subject: Kitfox-List: Spare GSC prop?
> --> Kitfox-List message posted by: "ron schick"
> <roncarolnikko@hotmail.com>
>
> I destroyed the 68" GSC today on my Avid. I was sitting there minding my
> own business, warming up the motor, when the nosegear broke off. Hate it
> when that happens. It seems that someone had a spare a while back and if
> they would like to sell it please let me know before I order my nice new
> blades.
> On a happier note I started covering the Kitfox. I have the bottom and
> two sides of the fuselage done. What a learning curve, but it's looking
> good. Ron NB Ore
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Spare GSC prop? |
--> Kitfox-List message posted by: "ron schick" <roncarolnikko@hotmail.com>
Sorry Floran I forgot to mention I need a left hand for a 582. I think the
912 props are differant.
Ron NB Ore
>From: "Floran Higgins" <cliffh@outdrs.net>
>Reply-To: kitfox-list@matronics.com
>To: <kitfox-list@matronics.com>
>Subject: Re: Kitfox-List: Spare GSC prop?
>Date: Thu, 15 Dec 2005 13:36:06 -0700
>
>--> Kitfox-List message posted by: "Floran Higgins" <cliffh@outdrs.net>
>
>What engine are you running?
>I have a 3 bladed GSC prop for a 912 UL.
>Floran H.
>----- Original Message -----
>From: "ron schick" <roncarolnikko@hotmail.com>
>To: <kitfox-list@matronics.com>
>Subject: Kitfox-List: Spare GSC prop?
>
>
> > --> Kitfox-List message posted by: "ron schick"
> > <roncarolnikko@hotmail.com>
> >
> > I destroyed the 68" GSC today on my Avid. I was sitting there minding
>my
> > own business, warming up the motor, when the nosegear broke off. Hate it
> > when that happens. It seems that someone had a spare a while back and
>if
> > they would like to sell it please let me know before I order my nice new
> > blades.
> > On a happier note I started covering the Kitfox. I have the bottom
>and
> > two sides of the fuselage done. What a learning curve, but it's looking
> > good. Ron NB Ore
> >
> >
> >
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Spare GSC prop? I have a spare :-) |
--> Kitfox-List message posted by: Aerobatics@aol.com
I bought an IVO for my 582 been on disply since....:-)
if interested Ill take photos etc
Dave
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Spare GSC prop? |
--> Kitfox-List message posted by: "Cudnohufsky's" <7suds@chartermi.net>
Ron,
If you are unable to use the prop offered by Floran I may be interested in
it if it is alright with Floran, I have a 912ul I need a prop for. Floran,
if you do not have another interested in the prop please contact me off list
and let me know what you would like to get for it.
Lloyd
----- Original Message -----
From: "Floran Higgins" <cliffh@outdrs.net>
Subject: Re: Kitfox-List: Spare GSC prop?
> --> Kitfox-List message posted by: "Floran Higgins" <cliffh@outdrs.net>
>
> What engine are you running?
> I have a 3 bladed GSC prop for a 912 UL.
> Floran H.
> ----- Original Message -----
> From: "ron schick" <roncarolnikko@hotmail.com>
> To: <kitfox-list@matronics.com>
> Subject: Kitfox-List: Spare GSC prop?
>
>
>> --> Kitfox-List message posted by: "ron schick"
>> <roncarolnikko@hotmail.com>
>>
>> I destroyed the 68" GSC today on my Avid. I was sitting there minding my
>> own business, warming up the motor, when the nosegear broke off. Hate it
>> when that happens. It seems that someone had a spare a while back and if
>> they would like to sell it please let me know before I order my nice new
>> blades.
>> On a happier note I started covering the Kitfox. I have the bottom and
>> two sides of the fuselage done. What a learning curve, but it's looking
>> good. Ron NB Ore
>>
>>
>>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Spare GSC prop? I have a spare :-) |
--> Kitfox-List message posted by: "Marwynne Kuhn" <marwynne@verizon.net>
I would be interested. Contact me kitfox@walla.com . With pictures and
price. Location etc
-----Original Message-----
From: owner-kitfox-list-server@matronics.com
[mailto:owner-kitfox-list-server@matronics.com]On Behalf Of
Aerobatics@aol.com
Subject: Re: Kitfox-List: Spare GSC prop? I have a spare :-)
--> Kitfox-List message posted by: Aerobatics@aol.com
I bought an IVO for my 582 been on disply since....:-)
if interested Ill take photos etc
Dave
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | WOW Thanks prop response! |
--> Kitfox-List message posted by: "ron schick" <roncarolnikko@hotmail.com>
Thanks for all of the prop offers. I still haven't purchased one yet as I'm
waiting to find out the location and cost of most. It is comforting to
know that fellow Fox/Avid owners can find help here when things go wrong.
I got a three blade package price with freight from GSC today for $375.00
no leading edge urethane. Other complete props, with shipping to Oregon,
may cost and be worth far more than that for sure. Thanks again and I'll
be checking my mail. Ron N.B. OR
P.S. I think there is a classified section at Sportflight our kitfox
site. I might post any leftovers in my shop.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Spare GSC prop? |
--> Kitfox-List message posted by: "ron schick" <roncarolnikko@hotmail.com>
Lloyd I don't think a 912 prop would fit my 582 with gearbox. I hope your
location makes it conveniant. Ron NB Ore
do not archive
>From: "Cudnohufsky's" <7suds@Chartermi.net>
>Reply-To: kitfox-list@matronics.com
>To: <kitfox-list@matronics.com>
>Subject: Re: Kitfox-List: Spare GSC prop?
>Date: Thu, 15 Dec 2005 19:37:24 -0600
>
>--> Kitfox-List message posted by: "Cudnohufsky's" <7suds@chartermi.net>
>
>Ron,
>If you are unable to use the prop offered by Floran I may be interested in
>it if it is alright with Floran, I have a 912ul I need a prop for. Floran,
>if you do not have another interested in the prop please contact me off
>list
>and let me know what you would like to get for it.
>Lloyd
>----- Original Message -----
>From: "Floran Higgins" <cliffh@outdrs.net>
>To: <kitfox-list@matronics.com>
>Subject: Re: Kitfox-List: Spare GSC prop?
>
>
> > --> Kitfox-List message posted by: "Floran Higgins" <cliffh@outdrs.net>
> >
> > What engine are you running?
> > I have a 3 bladed GSC prop for a 912 UL.
> > Floran H.
> > ----- Original Message -----
> > From: "ron schick" <roncarolnikko@hotmail.com>
> > To: <kitfox-list@matronics.com>
> > Subject: Kitfox-List: Spare GSC prop?
> >
> >
> >> --> Kitfox-List message posted by: "ron schick"
> >> <roncarolnikko@hotmail.com>
> >>
> >> I destroyed the 68" GSC today on my Avid. I was sitting there minding
>my
> >> own business, warming up the motor, when the nosegear broke off. Hate
>it
> >> when that happens. It seems that someone had a spare a while back and
>if
> >> they would like to sell it please let me know before I order my nice
>new
> >> blades.
> >> On a happier note I started covering the Kitfox. I have the bottom
>and
> >> two sides of the fuselage done. What a learning curve, but it's looking
> >> good. Ron NB Ore
> >>
> >>
> >>
> >
> >
> >
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kitfox-List message posted by: "jdmcbean" <jdmcbean@cableone.net>
They turn opposite directions...
Fly Safe !!
John & Debra McBean
www.sportplanellc.com
"The Sky is not the Limit... It's a Playground"
-----Original Message-----
From: owner-kitfox-list-server@matronics.com
[mailto:owner-kitfox-list-server@matronics.com]On Behalf Of ron schick
Subject: Re: Kitfox-List: Spare GSC prop?
--> Kitfox-List message posted by: "ron schick" <roncarolnikko@hotmail.com>
Lloyd I don't think a 912 prop would fit my 582 with gearbox. I hope your
location makes it conveniant. Ron NB Ore
do not archive
>From: "Cudnohufsky's" <7suds@Chartermi.net>
>Reply-To: kitfox-list@matronics.com
>To: <kitfox-list@matronics.com>
>Subject: Re: Kitfox-List: Spare GSC prop?
>Date: Thu, 15 Dec 2005 19:37:24 -0600
>
>--> Kitfox-List message posted by: "Cudnohufsky's" <7suds@chartermi.net>
>
>Ron,
>If you are unable to use the prop offered by Floran I may be interested in
>it if it is alright with Floran, I have a 912ul I need a prop for. Floran,
>if you do not have another interested in the prop please contact me off
>list
>and let me know what you would like to get for it.
>Lloyd
>----- Original Message -----
>From: "Floran Higgins" <cliffh@outdrs.net>
>To: <kitfox-list@matronics.com>
>Subject: Re: Kitfox-List: Spare GSC prop?
>
>
> > --> Kitfox-List message posted by: "Floran Higgins" <cliffh@outdrs.net>
> >
> > What engine are you running?
> > I have a 3 bladed GSC prop for a 912 UL.
> > Floran H.
> > ----- Original Message -----
> > From: "ron schick" <roncarolnikko@hotmail.com>
> > To: <kitfox-list@matronics.com>
> > Subject: Kitfox-List: Spare GSC prop?
> >
> >
> >> --> Kitfox-List message posted by: "ron schick"
> >> <roncarolnikko@hotmail.com>
> >>
> >> I destroyed the 68" GSC today on my Avid. I was sitting there minding
>my
> >> own business, warming up the motor, when the nosegear broke off. Hate
>it
> >> when that happens. It seems that someone had a spare a while back and
>if
> >> they would like to sell it please let me know before I order my nice
>new
> >> blades.
> >> On a happier note I started covering the Kitfox. I have the bottom
>and
> >> two sides of the fuselage done. What a learning curve, but it's looking
> >> good. Ron NB Ore
> >>
> >>
> >>
> >
> >
> >
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|