---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Sun 04/29/07: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:47 AM - Re: covering (Lynn Matteson) 2. 03:05 AM - Re: Re: Signatures (Lynn Matteson) 3. 05:43 AM - Re: Re: Signatures (Dave G.) 4. 09:24 AM - Re: covering (xfire) 5. 09:50 AM - Re: Signatures (Michel Verheughe) 6. 09:52 AM - Re: Re: Check your Gear legs (Michel Verheughe) 7. 09:59 AM - PIREP (off topic) (Michel Verheughe) 8. 02:24 PM - muffler, wheels (markdonahue) 9. 04:06 PM - Re: Signatures (Lynn Matteson) 10. 07:40 PM - 582 EGT's (Marco Menezes) 11. 07:55 PM - Re: 582 EGT's (Malcolmbru@aol.com) 12. 09:14 PM - Re: Signatures (kurt schrader) 13. 11:38 PM - Re: Check your Gear legs (xfire) ________________________________ Message 1 _____________________________________ Time: 02:47:57 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: covering If you're talking about the Polyfiber material material marked "Poly- fiber ACFT", it doesn't matter. That's what I used and that's all I know about...I kinda think the others would be the same, but wouldn't swear to it. On Apr 28, 2007, at 10:13 PM, jerry evans wrote: Lynn Matteson Grass Lake, Michigan Kitfox IV Speedster w/Jabiru 2200 flying w/250+ hrs do not archive > Is there a right side up on the stits Dacron or can I put ether > side up? I started my covering job today and got the horizontal > stab done then asked my self which side did I put on the outside of > it . I rolled out the covering and put the inside of the roll on > the inside of the stab. Any help thanks > > Jerry Evans > kitfox 555 _- > www.matronics.com/Navigator?Kitfox-List _- > =========================================================== ________________________________ Message 2 _____________________________________ Time: 03:05:38 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: Re: Signatures Now that you mention it, I did see a guy with a camera on his head...so that was a Mac ad, eh? The trouble with a lot of ads, or maybe it is just me, when they're over, sometimes I couldn't tell you what the ad was for. I get so caught up in the humor, the product gets lost in the translation. I know other people who say the same thing. Lynn do not archive On Apr 28, 2007, at 11:00 PM, Noel Loveys wrote: > > They run television ads where a slightly over weight fellow wearing > dark > rimmed glasses introduces himself as PC and another younger guy in > a casual > shirt and pants introduces himself as Mac... Of course the Mac > always gets > the upper hand... Good ads. > > PC was having a camera mounted on his head with duct tape bragging > that some > day Mac could get one then the installer informs him that Mac comes > with the > camera. > > Another ad has a really geeky looking Mac praising up PC. Then the > "real" > Mac comes along and asks what's happening.... The geeky looking > stand in > says under his breathe how big a fan he is on Macs. > > There is a whole series of theses ads running. All are to one > extent or the > other entertaining the same way as While E. Coyote... You keep > wondering how > PC is going to mess up in each new ad. > > A short while ago somebody did actually write a virus that attacks the > Mac... Didn't last very long. > > Noel ________________________________ Message 3 _____________________________________ Time: 05:43:17 AM PST US From: "Dave G." Subject: Re: Kitfox-List: Re: Signatures I think the commercials are pretty stupid, the few that I've seen. But Apple is pretty proud of themselves over them. They archive all of them so you can make sure you don't miss any. http://www.apple.com/getamac/ads/ I noticed them when looking for something for my ipod. Dave Goddard- Mod IV 1050/582 do not archive ----- Original Message ----- From: "Lynn Matteson" Sent: Sunday, April 29, 2007 7:08 AM Subject: Re: Kitfox-List: Re: Signatures > > Now that you mention it, I did see a guy with a camera on his head...so > that was a Mac ad, eh? The trouble with a lot of ads, or maybe it is just > me, when they're over, sometimes I couldn't tell you what the ad was for. > I get so caught up in the humor, the product gets lost in the > translation. I know other people who say the same thing. > ________________________________ Message 4 _____________________________________ Time: 09:24:20 AM PST US Subject: Kitfox-List: Re: covering From: "xfire" The poly fiber and dacron are the same thing, but the dacron is not stamped, and therefore is about half the price. There is not a inside or outside you can lay it on either way. Leonard Perry Soldotna AK Avid "C / Mk IV" 582 90% rebuilt Read this topic online here: http://forums.matronics.com/viewtopic.php?p=109852#109852 ________________________________ Message 5 _____________________________________ Time: 09:50:27 AM PST US From: Michel Verheughe Subject: Re: Kitfox-List: Signatures Guy, I understand and accept your decision to have a signature. But I write to a lot of people, in three different languages, and from two different computers; a Macintosh and a PC. I can't include a signature so I'll have to do it manually, for each posting. Cheers, Michel Verheughe Norway Kitfox 3 - Jabiru Do not archive ________________________________ Message 6 _____________________________________ Time: 09:52:03 AM PST US From: Michel Verheughe Subject: Re: Kitfox-List: Re: Check your Gear legs On Apr 27, 2007, at 8:37 AM, xfire wrote: > the intent of the post was to make guys aware that there could be a > crack in the the gear UNDER THE BUNGIES that you CANT SEE. Do you have any photo to share with us? In advance, thank you very much. Michel Verheughe Norway Kitfox 3 - Jabiru do not archive ________________________________ Message 7 _____________________________________ Time: 09:59:21 AM PST US From: Michel Verheughe Subject: Kitfox-List: PIREP (off topic) I just wanted to say that I am back from a 4 days trip from Norway to Paderborn, Germany - and return. 19:15 hours of fun flying in my Kitfox with a Jabiru engine. Life a great! Cheers, Michel Verheughe Norway Kitfox 3 - Jabiru Do not archive ________________________________ Message 8 _____________________________________ Time: 02:24:50 PM PST US From: "markdonahue" Subject: Kitfox-List: muffler, wheels Hi, I am Mark Donahue, and I have a Kitfox model IV 1050 with a rotax 912 UL engine. Can you folks tell me if the new kitfox people handle replacement mufflers? or what else is available? I have had two weldment failures on the muffler itself although I have 750 hours on the plane. Any info is appreciated. I also have some original alum wheels that come with the original kit that I have since upgraded to new split wheels and airplane tires. If someone is in need let me know. Thanks, Mark ________________________________ Message 9 _____________________________________ Time: 04:06:54 PM PST US From: Lynn Matteson Subject: Re: Kitfox-List: Signatures Michel- Can't you just have a signature in, say, text edit, or in Stickies, which you can leave on your desktop and then copy and paste it onto the post? (I can't believe I'm making a suggestion about how to do something on any computer to anybody, let alone someone who has taught me a bit about Macs. : ) ) Lynn Matteson Grass Lake, Michigan Kitfox IV Speedster w/Jabiru 2200 flying w/250+ hrs do not archive On Apr 29, 2007, at 12:50 PM, Michel Verheughe wrote: > > Guy, I understand and accept your decision to have a signature. But > I write to a lot of people, in three different languages, and from > two different computers; a Macintosh and a PC. I can't include a > signature so I'll have to do it manually, for each posting. > > Cheers, > Michel Verheughe > Norway > Kitfox 3 - Jabiru > > Do not archive ________________________________ Message 10 ____________________________________ Time: 07:40:43 PM PST US From: Marco Menezes Subject: Kitfox-List: 582 EGT's Hey List. My 582 is running great. Only complaint is that at cruise, EGTs for fwd cylinder run consistently about 100 degrees cooler than aft cylinder, though both are in the green. Would it be ok to equallize EGTs by leaning only the fwd carb a tad? Either by switching to a leaner mid range jet needle or just raising the clip a notch? Seems I recall someone saying not to "unbalance" carbs in this way. Or maybe I imagined it? Marco Menezes Model 2 582 N99KX --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos. ________________________________ Message 11 ____________________________________ Time: 07:55:01 PM PST US From: Malcolmbru@aol.com Subject: Re: Kitfox-List: 582 EGT's try swapping the egt senders just switch them at the gage , to see if the gage is right it can be sent to westach for re calibrating. an air bubble in the head will give a high egt reading malcolm michigan kit foxer ************************************** See what's free at http://www.aol.com. ________________________________ Message 12 ____________________________________ Time: 09:14:15 PM PST US From: kurt schrader Subject: Re: Kitfox-List: Signatures I like Lynns idea. I will write several signatures on a single word processor page and seve them. Cut and paste as needed. Often however, I am not at my computer and must hand type it in every time. Remember, this is not a do or die thing. Just a request from the admins to help us keep track of each other and possibly answer questions better. Kurt Schrader S-5 NSI turbo with CAP 140 prop (down for annual) Rockledge Fl and Panama City, Panama --- Lynn Matteson wrote: > Michel- > Can't you just have a signature in, say, text edit, > or in Stickies, > which you can leave on your desktop and then copy > and paste it onto > the post? __________________________________________________ ________________________________ Message 13 ____________________________________ Time: 11:38:35 PM PST US Subject: Kitfox-List: Re: Check your Gear legs From: "xfire" the third pic in the original post is the stub of the gear leg that broke off.. You may have to read it onthe forum for it to show. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=109944#109944 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.