---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Thu 04/30/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:06 AM - Re: Rc Allen Turn Coordinator Install (Lynn Matteson) 2. 05:57 AM - Re: Rc Allen Turn Coordinator Install (Noel Loveys) 3. 08:24 AM - Re: Anyone know anything about the Raven (kitfox clone)? (dholly) 4. 11:23 AM - Re: Anyone know anything about the Raven (kitfox clone)? (dave) ________________________________ Message 1 _____________________________________ Time: 03:06:47 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: Rc Allen Turn Coordinator Install I would think that the least they could do would be to send you a wiring diagram. Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 635.2 hrs Sensenich 62x46 Electroair direct-fire ignition system Status: flying do not archive On Apr 29, 2009, at 5:17 PM, DanM wrote: > > Hello all, I purchased a used RC Allen Turn and Bank indicator PN > 82a-11 for a good price I might add ,to install on my Kitfox IV. > Trouble is I didn't get the installation instructions so I'm kinda > stuck. I called the factory (Kelly) and they said no instructions > are available which seems kinda strange to me. Any way, my main > problem is the type and size of wire to use, circuit breaker size > and how the wire connects in the connector. Any help would be > appreciated. > > Thanks > > -------- > Dan Mc Intyre > Kitfox IV , Ready for Inspection > Jabiru 2200 , 1.5 hours > Sensenich 62x46 > N443DM > do not archive > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=241975#241975 > > ________________________________ Message 2 _____________________________________ Time: 05:57:42 AM PST US From: "Noel Loveys" Subject: RE: Kitfox-List: Rc Allen Turn Coordinator Install All the instructions you will need are in AC43.13 1b/2a download it form the FAA site....Free!! Sections to check are the sections on wiring and panel installations in respect to being able to sustain G forces without wrecking your panel. Fuses/breakers should always be as close to the buss as possible. Most certified jobs actually have one post of the breakers actually on a buss. That way everything downstream is protected. I have seen guys who put more than one thing on a breaker. For instance they may have the T.C. wired with the radio. If the ever get into a situation where they have to load shed they may have to shut down their radio to preserve the battery. Noel -----Original Message----- From: owner-kitfox-list-server@matronics.com [mailto:owner-kitfox-list-server@matronics.com] On Behalf Of Lynn Matteson Sent: Thursday, April 30, 2009 7:36 AM Subject: Re: Kitfox-List: Rc Allen Turn Coordinator Install I would think that the least they could do would be to send you a wiring diagram. Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 635.2 hrs Sensenich 62x46 Electroair direct-fire ignition system Status: flying do not archive On Apr 29, 2009, at 5:17 PM, DanM wrote: > > Hello all, I purchased a used RC Allen Turn and Bank indicator PN > 82a-11 for a good price I might add ,to install on my Kitfox IV. > Trouble is I didn't get the installation instructions so I'm kinda > stuck. I called the factory (Kelly) and they said no instructions > are available which seems kinda strange to me. Any way, my main > problem is the type and size of wire to use, circuit breaker size > and how the wire connects in the connector. Any help would be > appreciated. > > Thanks > > -------- > Dan Mc Intyre > Kitfox IV , Ready for Inspection > Jabiru 2200 , 1.5 hours > Sensenich 62x46 > N443DM > do not archive > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=241975#241975 > > ________________________________ Message 3 _____________________________________ Time: 08:24:05 AM PST US Subject: Kitfox-List: Re: Anyone know anything about the Raven (kitfox clone)? From: "dholly" Jon- I saw a post recently by a Raven scratch builder, perhaps you can reach him to answer your questions. (http://rotaxaircraft.com/forum/viewtopic.php?f=8&t=44&p=274&hilit=raven#p274) -------- Airdale Avid+ project | Jab2200 | Aerocet 1100 Amphibs Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242081#242081 ________________________________ Message 4 _____________________________________ Time: 11:23:43 AM PST US Subject: Kitfox-List: Re: Anyone know anything about the Raven (kitfox clone)? From: "dave" Raven at my strip , I have the plans here. Blueprints etc . Basically a 400 lbs Kitfox1,2 / avid . I have wing tips molds and upper and lower cowl molds as well. Here is a pic ....... his name is raven http://rotaxaircraft.com/forum/viewtopic.php?f=25&t=42 -------- Rotax Dealer, Ontario Canada http://www.cfisher.com/ Awesome *New Forum * http://rotaxaircraft.com/forum/ Realtime Kitfox movies to separate the internet chatter from the truth http://www.youtube.com/profile_videos?user=kitfoxflyer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=242120#242120 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.