Today's Message Index:
----------------------
1. 04:09 AM - Re: Re: Missing Rotax 912S - A concern?Re: Missing Rotax 912S - A c (Catz631@aol.com)
2. 01:47 PM - Re: Gear Box Ratio (jridgway)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Missing Rotax 912S - A concern?Re: Missing Rotax |
912S - A c
I was having a miss in my 912 UL along with a bad mag check on runup. I
worked on this for a couple of months and finally found two things that I
believe were causing it. One was a broken wire in the red power lead to one of
the modules. I found this by using an ohm meter and a sewing pin which I
inserted in the wire shielding as I moved along the wire. The break under the
wiring was totally invisable on the surface.
The second thing I found was a bad plug. I removed the almost new plugs
and "bomb" checked them under pressure. Sure enough one of them would not fire
although it looked fine.
After those fixes,it is now running very smooth with no misses.
Dick Maddux
Kitfox 4-1200
Milton,Fl
**************Make your summer sizzle with fast and easy recipes for the
grill. (http://food.aol.com/grilling?ncid=emlcntusfood00000005)
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Gear Box Ratio |
I remember reading in one of the KITFOX service letters that all they ever delivered
was a 3:1. Hope this helps.
Jack
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=251205#251205
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|