---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Thu 12/31/09: 16 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:59 AM - test (Dwight Purdy) 2. 06:00 AM - 582 owners show me some Oil reservoirs (Tom Jones) 3. 07:08 AM - Re: test (Patrick Reilly) 4. 08:29 AM - Re: test (fox5flyer) 5. 08:29 AM - Re: test (Dwight Purdy) 6. 08:33 AM - Fw: test (fox5flyer) 7. 08:52 AM - Re: 582 owners show me some Oil reservoirs (WurlyBird) 8. 09:44 AM - Re: test (Lynn Matteson) 9. 10:26 AM - Re: test (Dave G) 10. 10:53 AM - Re: test (Marco Menezes) 11. 10:55 AM - Re: test (Marco Menezes) 12. 11:15 AM - Re: test (Dave G) 13. 12:32 PM - Re: test (Lynn Matteson) 14. 12:41 PM - Re: test (Lynn Matteson) 15. 02:15 PM - Re: test (Paul Franz) 16. 03:15 PM - Re: 582 owners show me some Oil reservoirs (Guy Buchanan) ________________________________ Message 1 _____________________________________ Time: 04:59:44 AM PST US From: "Dwight Purdy" Subject: Kitfox-List: test I just checked to see if I was thrown off the list. Where is everyone? Dwight Purdy Model II do not archive ________________________________ Message 2 _____________________________________ Time: 06:00:04 AM PST US Subject: Kitfox-List: 582 owners show me some Oil reservoirs From: "Tom Jones" 503 owners can show me some two if there are any out there. I have gathered all the parts to install an oil injection system except the oil reservoir and lines. The aircraft Rotax tank and lines look nice and I would like to see how some you have mounted it. My other option is to go down to the Ski Doo shop and get an oil reservoir, filter and lines for an air cooled engine. I can get one that is 2.5 liters which is plenty for my 21 gallon fuel capacity. From what I have seen in the catalogs I can get one for about half the cost of the aircraft Rotax system. Either way I will probably need to fabricate the mount. -------- Tom Jones Classic IV 503 Rotax, 72 inch Two blade Warp Ellensburg, WA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=279382#279382 ________________________________ Message 3 _____________________________________ Time: 07:08:08 AM PST US Subject: Re: Kitfox-List: test From: Patrick Reilly Dwight, I was thinking the same thing a couple of days ago. Thanks for testing. Maybe the Kitfox Matronix era has ended and everyone has switched to Team Kitfox. With the ease of using the Matronix website I doubt that though. do not archive Pat Reilly Mod 3 582 Rebuild Rockford, IL On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy wrote: > I just checked to see if I was thrown off the list. Where is everyone? > > Dwight Purdy > Model II > do not archive > > * > > * > > ________________________________ Message 4 _____________________________________ Time: 08:29:19 AM PST US From: "fox5flyer" Subject: Re: Kitfox-List: test Did you forget what time of the year it is? People are either off visiting or working on their project. It's always been this way. Deke ----- Original Message ----- From: Patrick Reilly To: kitfox-list@matronics.com Sent: Thursday, December 31, 2009 10:05 AM Subject: Re: Kitfox-List: test Dwight, I was thinking the same thing a couple of days ago. Thanks for testing. Maybe the Kitfox Matronix era has ended and everyone has switched to Team Kitfox. With the ease of using the Matronix website I doubt that though. do not archive Pat Reilly Mod 3 582 Rebuild Rockford, IL On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy wrote: I just checked to see if I was thrown off the list. Where is everyone? Dwight Purdy Model II do not archive "_blank">www.aeroelectric.com .com/" target="_blank">www.buildersbooks.com ="_blank">www.homebuilthelp.com ank">www.howtocrimp.com _blank">http://www.matronics.com/contribution arget="_blank">http://www.matronics.com/Navigator?Kitfox-List ttp://forums.matronics.com ________________________________ Message 5 _____________________________________ Time: 08:29:19 AM PST US From: "Dwight Purdy" Subject: Re: Kitfox-List: test My last one received was on the 28th do not archive Dwight Purdy Model II ----- Original Message ----- From: Patrick Reilly To: kitfox-list@matronics.com Sent: Thursday, December 31, 2009 10:05 AM Subject: Re: Kitfox-List: test Dwight, I was thinking the same thing a couple of days ago. Thanks for testing. Maybe the Kitfox Matronix era has ended and everyone has switched to Team Kitfox. With the ease of using the Matronix website I doubt that though. do not archive Pat Reilly Mod 3 582 Rebuild Rockford, IL On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy wrote: I just checked to see if I was thrown off the list. Where is everyone? Dwight Purdy Model II do not archive "_blank">www.aeroelectric.com .com/" target="_blank">www.buildersbooks.com ="_blank">www.homebuilthelp.com ank">www.howtocrimp.com _blank">http://www.matronics.com/contribution arget="_blank">http://www.matronics.com/Navigator?Kitfox-List ttp://forums.matronics.com ________________________________ Message 6 _____________________________________ Time: 08:33:03 AM PST US From: "fox5flyer" Subject: Fw: Kitfox-List: test Actually, most of us are sitting around trying to figure out how to deal with the year end tax bills! D Did you forget what time of the year it is? People are either off visiting or working on their project. It's always been this way. Deke ----- Original Message ----- From: Patrick Reilly To: kitfox-list@matronics.com Sent: Thursday, December 31, 2009 10:05 AM Subject: Re: Kitfox-List: test Dwight, I was thinking the same thing a couple of days ago. Thanks for testing. Maybe the Kitfox Matronix era has ended and everyone has switched to Team Kitfox. With the ease of using the Matronix website I doubt that though. do not archive Pat Reilly Mod 3 582 Rebuild Rockford, IL On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy wrote: I just checked to see if I was thrown off the list. Where is everyone? Dwight Purdy Model II do not archive "_blank">www.aeroelectric.com .com/" target="_blank">www.buildersbooks.com ="_blank">www.homebuilthelp.com ank">www.howtocrimp.com _blank">http://www.matronics.com/contribution arget="_blank">http://www.matronics.com/Navigator?Kitfox-List ttp://forums.matronics.com ________________________________ Message 7 _____________________________________ Time: 08:52:19 AM PST US Subject: Kitfox-List: Re: 582 owners show me some Oil reservoirs From: "WurlyBird" Sorry about the somewhat low quality of the pictures but my plane lives in a little cubby in the garage and it is too Fn cold to drag it outside. Mine is mounted at an angle at the top of the firewall between the radiator plumbing and the fuel pump. I hope this helps. I did not do this install but it looks to be by the books from what I have seen in the builders manual. James -------- James Kitfox 3 / 582 / GSC prop The ink is still drying on my new certificate Read this topic online here: http://forums.matronics.com/viewtopic.php?p=279423#279423 Attachments: http://forums.matronics.com//files/pc310065_801.jpg http://forums.matronics.com//files/pc310063_655.jpg ________________________________ Message 8 _____________________________________ Time: 09:44:09 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: test Or sitting around waiting for the snow to accumulate. : ) Happy New Year, everyone. Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 828.9 hrs Countdown to 1000 hrs~171 to go Sensenich 62"x46" Wood prop Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying (and learning) do not archive On Dec 31, 2009, at 11:30 AM, fox5flyer wrote: > Actually, most of us are sitting around trying to figure out how to > deal with the year end tax bills! > D > > > Did you forget what time of the year it is? People are either off > visiting or working on their project. It's always been this way. > Deke > > ----- Original Message ----- > From: Patrick Reilly > To: kitfox-list@matronics.com > Sent: Thursday, December 31, 2009 10:05 AM > Subject: Re: Kitfox-List: test > > Dwight, I was thinking the same thing a couple of days ago. Thanks > for testing. Maybe the Kitfox Matronix era has ended and everyone > has switched to Team Kitfox. With the ease of using the Matronix > website I doubt that though. > do not archive > Pat Reilly > Mod 3 582 Rebuild > Rockford, IL > > On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy > wrote: > I just checked to see if I was thrown off the list. Where is everyone? > > Dwight Purdy > Model II > do not archive > "_blank">www.aeroelectric.com.com/" > target="_blank">www.buildersbooks.com="_blank">www.homebuilthelp.coman > k">www.howtocrimp.com_blank">http://www.matronics.com/ > contributionarget="_blank">http://www.matronics.com/Navigator? > Kitfox-Listttp://forums.matronics.com > > href="http://www.aeroelectric.com">www.aeroelectric.comhref="http:// > www.buildersbooks.com">www.buildersbooks.comhref="http:// > www.homebuilthelp.com">www.homebuilthelp.comhref="http:// > www.howtocrimp.com">www.howtocrimp.comhref="http:// > www.matronics.com/contribution">http://www.matronics.com/ > chref="http://www.matronics.com/Navigator?Kitfox-List">http:// > www.matronhref="http://forums.matronics.com">http:// > forums.matronics.com_- > ============================================================ _- > ============================================================ _- > =========================================================== ________________________________ Message 9 _____________________________________ Time: 10:26:22 AM PST US From: "Dave G" Subject: Re: Kitfox-List: test Wow, does the US tax system work that way? That your taxes are due right at year end? I've just received my annual greeting card from Revenue Canada reminding me that between now and spring I'll have to deal with supporting my government. It would be easier if I had one that actually believed in a single thing I did, I can't remember the last time that happened, but this guy is the worst ever. ----- Original Message ----- From: fox5flyer To: Kitfox List Sent: Thursday, December 31, 2009 12:30 PM Subject: Fw: Kitfox-List: test Actually, most of us are sitting around trying to figure out how to deal with the year end tax bills! D ________________________________ Message 10 ____________________________________ Time: 10:53:34 AM PST US From: Marco Menezes Subject: Re: Kitfox-List: test Yeah, I'm still out here. Throwin' wood on the fire as the snow piles up ou tside, wishing I had skis and cabin heater. - Ditto Lynn's sentiments. A healthy and prosperous 2010 to all. - Marco Menezes N99KX Kitfox 2 582-90 C-Box 3:1 w/clutch - do not archive --- On Thu, 12/31/09, Lynn Matteson wrote: From: Lynn Matteson Subject: Re: Kitfox-List: test Or sitting around waiting for the snow to accumulate. : ) Happy New Year, everyone. Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 828.9 hrs Countdown to 1000 hrs~171 to go Sensenich 62"x46" Wood prop Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying (and learning) do not archive On Dec 31, 2009, at 11:30 AM, fox5flyer wrote: > Actually, most of us are sitting around trying to figure out how to deal with the year end tax bills! > D > > > Did you forget what time of the year it is?- People are either off visi ting or working on their project.---It's always been this way. > Deke > > ----- Original Message ----- > From: Patrick Reilly > To: kitfox-list@matronics.com > Sent: Thursday, December 31, 2009 10:05 AM > Subject: Re: Kitfox-List: test > > Dwight, I was thinking the same thing a couple of days ago. Thanks for te sting. Maybe the Kitfox Matronix era has ended and everyone has switched to Team Kitfox. With the ease of using the Matronix website I doubt that thou gh. > do not archive > Pat Reilly > Mod 3 582 Rebuild > Rockford, IL > > On Thu, Dec 31, 2009 at 6:56 AM, Dwight Purdy wrote: > I just checked to see if I was thrown off the list. Where is everyone? > > Dwight Purdy > Model II > do not archive > "_blank">www.aeroelectric.com.com/" target="_blank">www.buildersbooks.c om="_blank">www.homebuilthelp.comank">www.howtocrimp.com_blank">http://ww w.matronics.com/contributionarget="_blank">http://www.matronics.com/Navig ator?Kitfox-Listttp://forums.matronics.com > > href="http://www.aeroelectric.com">www.aeroelectric.comhref="http://w ww.buildersbooks.com">www.buildersbooks.comhref="http://www.homebuilthelp .com">www.homebuilthelp.comhref="http://www.howtocrimp.com">www.howtocrim p.comhref="http://www.matronics.com/contribution">http://www.matronics.co m/chref="http://www.matronics.com/Navigator?Kitfox-List">http://www.matro ==== le, List Admin. =0A=0A=0A ________________________________ Message 11 ____________________________________ Time: 10:55:32 AM PST US From: Marco Menezes Subject: Re: Kitfox-List: test No Dave, April 15 is tax day in the US. - Doesn't stop us from gnashing of teeth beginning January 1, however. - Marco Menezes N99KX Kitfox 2 582-90 C-Box 3:1 w/clutch - do not archive --- On Thu, 12/31/09, Dave G wrote: From: Dave G Subject: Re: Kitfox-List: test Wow, does the US tax system work that way? That your taxes are due right at year end? I've just received my annual greeting card from Revenue Canada r eminding me that between now and spring I'll have to deal with supporting m y government. It would be easier if I had one that actually believed in a s ingle thing I did, I can't remember the last time that happened, but this g uy is the worst ever. ----- Original Message ----- From: fox5flyer Sent: Thursday, December 31, 2009 12:30 PM Subject: Fw: Kitfox-List: test Actually, most of us are sitting around trying to figure out how to deal wi th the year end tax bills! D - =0A=0A=0A ________________________________ Message 12 ____________________________________ Time: 11:15:07 AM PST US From: "Dave G" Subject: Re: Kitfox-List: test OK, then that can wait for spring then. Since my 'fox can't fly right now I'll return to my task of making all these bottles of Innis&Gunn into empties. Hell, somebody has to do it. Have a great New Year everyone, all the best. ----- Original Message ----- From: Marco Menezes To: kitfox-list@matronics.com Sent: Thursday, December 31, 2009 2:52 PM Subject: Re: Kitfox-List: test No Dave, April 15 is tax day in the US. Doesn't stop us from gnashing of teeth beginning January 1, however. Marco Menezes N99KX Kitfox 2 582-90 C-Box 3:1 w/clutch do not archive --- On Thu, 12/31/09, Dave G wrote: From: Dave G Subject: Re: Kitfox-List: test To: kitfox-list@matronics.com Date: Thursday, December 31, 2009, 1:23 PM Wow, does the US tax system work that way? That your taxes are due right at year end? I've just received my annual greeting card from Revenue Canada reminding me that between now and spring I'll have to deal with supporting my government. It would be easier if I had one that actually believed in a single thing I did, I can't remember the last time that happened, but this guy is the worst ever. ________________________________ Message 13 ____________________________________ Time: 12:32:07 PM PST US From: Lynn Matteson Subject: Re: Kitfox-List: test Thank you, thank you, thank you, Marco, for the spelling of "gnashing".....I wanted to use that term yesterday, and couldn't find it under nashing, knashing,....finally used "grinding teeth" It's HELL to get old! But better than the alternative... Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 828.9 hrs Countdown to 1000 hrs~171 to go Sensenich 62"x46" Wood prop Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying (and learning) do not archive On Dec 31, 2009, at 1:52 PM, Marco Menezes wrote: > No Dave, April 15 is tax day in the US. > > Doesn't stop us from gnashing of teeth beginning January 1, however. > > Marco Menezes N99KX > Kitfox 2 582-90 C-Box 3:1 w/clutch ________________________________ Message 14 ____________________________________ Time: 12:41:24 PM PST US From: Lynn Matteson Subject: Re: Kitfox-List: test Same here, Marco....on the burning of wood that is, and I just improved my cabin heat considerably. Since I built an updraft intake manifold for my Jabiru engine, I got rid of the muffler (the Rotec TBI was now in the way) and now have straight pipes (which are not ALL that noisy), around which I have built a longer heat muff, and I'm now getting 150+ degrees of heat coming into the cabin from that one heat muff. The other side is only putting out about 73 degrees, so I just shut it off...it seems like fresh air by comparison. I was up flying the other day, and the OAT was 12 F., and I was warm enough in tennis shoes and no ski pants. Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062, 828.9 hrs Countdown to 1000 hrs~171 to go Sensenich 62"x46" Wood prop Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying (and learning) do not archive On Dec 31, 2009, at 1:50 PM, Marco Menezes wrote: > Yeah, I'm still out here. Throwin' wood on the fire as the snow > piles up outside, wishing I had skis and cabin heater. > > Ditto Lynn's sentiments. A healthy and prosperous 2010 to all. > > Marco Menezes N99KX > Kitfox 2 582-90 C-Box 3:1 w/clutch ________________________________ Message 15 ____________________________________ Time: 02:15:11 PM PST US Subject: Re: Kitfox-List: test From: "Paul Franz" On Thu, December 31, 2009 10:23 am, Dave G wrote: > Wow, does the US tax system work that way? That your taxes are due right at year end? > I've just received my annual greeting card from Revenue Canada reminding me that > between now and spring I'll have to deal with supporting my government. It would be > easier if I had one that actually believed in a single thing I did, I can't remember > the last time that happened, but this guy is the worst ever. Here, we have various tax collecting authorities including primarily State and Federal. The tax returns cover various periods but primarily they are quarterly. And that means that the tax returns are due something like by the end of the month following the end of a quarter or maybe by the 10th. Everyone is required to have paid Federal taxes by the 10th day following the end of a quarter and that means filing an estimated tax return for some people. People with employee income usually don't need to file a return because they have had sufficient taxes withheld from their paychecks but in the case of a self employed person or business owner such as Deke, he will have an estimated Federal Tax return due plus his State Tax return due for 4th quarter 2009. Most people and companies have April 15 as the due date for annual Federal Income Tax return. That applies to most people since their tax year is the calendar year. Some businesses elect to have a tax year that doesn't correspond to the calendar year. So this is probably not a lot different than it is in Canada. -- Paul Franz 425.440.9505 (O) 425.241.1618 (C) One of the lessons of history is that nothing is often a good thing to do and always a clever thing to say. -- Will Durant ________________________________ Message 16 ____________________________________ Time: 03:15:48 PM PST US From: Guy Buchanan Subject: Re: Kitfox-List: 582 owners show me some Oil reservoirs At 05:57 AM 12/31/2009, you wrote: >503 owners can show me some two if there are any out there. Mine's item number 71154 on http://www.usplastic.com/catalog/item.aspx?itemid=23680&clickid=redirect You have to add a fitting to the bottom. Guy Buchanan San Diego, CA K-IV 1200 / 582-C / Warp / 400 hrs. and counting ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.