---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Tue 02/16/10: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:14 AM - Air Filter help (Roger Lee) 2. 02:18 PM - Re: Ed Gray Engine (Guy Buchanan) 3. 03:17 PM - For Sale, not needed (DanM) 4. 07:09 PM - Re: Ed Gray Engine (cmflyboy12@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:14:16 AM PST US Subject: Kitfox-List: Air Filter help From: "Roger Lee" Hi All, Does someone out there have a replacement air filter for the Jabiru 3300. The original is an RAF 17 A360. I know it must fit a car of some type, but I don't know which one. I would like to get a K&N replacement. Thanks, Any help would be appreciated. -------- Roger Lee Tucson, Az. Light Sport Repairman - Maintenance Rated Rotax Repair Center 520-574-1080 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=286643#286643 ________________________________ Message 2 _____________________________________ Time: 02:18:56 PM PST US From: Guy Buchanan Subject: Re: Kitfox-List: Ed Gray Engine At 05:02 PM 2/15/2010, you wrote: >Query No. ONE What engine is best for >10k? A used 912 or 912s. These, with diligent application to Barnstormers and other media can be found. Not often, but they're out there. One of my flying buddies just replaced his S with a $7k unit off of a crashed aircraft. The engine had been gone through by a reliable mechanic and declared quite safe. >No. TWO I want to make the outer wing bays removable to convert to a >speedster on demand. Has anyone done it, how is it done, what diff. in >performance? This has been done more than a few times. I've spoken to several who've done it and their preferences depended on their mission. Short wings gave more speed and higher roll rate, but higher take-off and landing speeds and rolls. Sleeving the spars is typical. I'd add that there is a requirement that you support all "end" ribs so the material shrink doesn't bow or break them, as is done currently for the outboard rib, and I'd use hinges to connect the two adjoining ribs, much as is currently done with cowls. My Number three, Ed, is to be careful not to reply to or quote in entirety a digest message. It sends the entire digest back to the list, which is cumbersome at best. Also be wary to change the title to suit your subject. Thanks, Guy Buchanan, Kitfox List Moderator San Diego, CA K-IV 1200 / 582-C / Warp / 400 hrs. and counting ________________________________ Message 3 _____________________________________ Time: 03:17:45 PM PST US Subject: Kitfox-List: For Sale, not needed From: "DanM" For Sale: (1) Falcon Air Speed Indicator Model ASI160M-3, 20-160 MPH, 3 1/8". New In box, purchased 2002 but never installed. Purchase price $114.95, sell for $60.00 (1) Flight Data Systems GT-50 2 1/4" New, installed, never used and removed one time Purchased 10/2007. Purchase price $159.00 Sell $80.00. Call my cell phone 559-903-8724 if interested. Email djmc4344@sbcglobal.net -------- Dan Mc Intyre Kitfox IV , Phase 1 Jabiru 2200 SN 1311 , 27 hours Sensenich 62x46 N443DM Read this topic online here: http://forums.matronics.com/viewtopic.php?p=286699#286699 ________________________________ Message 4 _____________________________________ Time: 07:09:26 PM PST US Subject: Re: Kitfox-List: Ed Gray Engine From: cmflyboy12@aol.com -----Original Message----- From: Guy Buchanan Sent: Tue, Feb 16, 2010 10:35 am Subject: Re: Kitfox-List: Ed Gray Engine At 05:02 PM 2/15/2010, you wrote: Query No. ONE What engineis best for 10k? A used 912 or 912s. These, with diligent application to Barnstormers andot her media can be found. Not often, but they're out there. One of myflying buddies just replaced his S with a $7k unit off of a crashedaircraft. The engine had been gone through by a reliable mechanic anddeclared quite saf e. No. TWO I want tomake the outer wing bays removable to convert to a speedster on demand. Has anyone done it, how is it done, whatdiff. in performance? This has been done more than a few times. I've spoken to several who'vedon e it and their preferences depended on their mission. Short wings gavemore speed and higher roll rate, but higher take-off and landing speedsand rol ls. Sleeving the spars is typical. I'd add that there is arequirement that you support all "end" ribs so the materialshrink doesn't bow or break the m, as is done currently for the outboardrib, and I'd use hinges to connect the two adjoining ribs, much as iscurrently done with cowls. My Number three, Ed, is to be careful not to reply to or quote inentirety a digest message. It sends the entire digest back to the list,which is cu mbersome at best. Also be wary to change the title to suityour subject. Thanks, Guy Buchanan, Kitfox List Moderator San Diego, CA K-IV 1200 / 582-C / Warp / 400 hrs. and counting ======================== =========== ======================== =========== ======================== =========== ======================== =========== Ive got a kitfox 2 with a 582 gray head with a cgs prop wooden 3 blade,3;1 gear box, and I what to go to a IVO prop ground ajust IVO is telling me to use a2 blade medium prop any ideas ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.