---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Tue 09/28/10: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:09 AM - Re: figure for service letter 35 (dave) 2. 03:13 AM - Re: Jabiru (Lynn Matteson) 3. 03:40 AM - Re: Jabiru (larry huntley) 4. 02:54 PM - Re: Sealant for header tank fittings (Kitfox George) 5. 07:13 PM - Re: figure for service letter 35 (jridgway) 6. 09:35 PM - Prop balancer for 582 (carlisle) 7. 09:36 PM - Re: Sealant for header tank fittings (Roger Lee) ________________________________ Message 1 _____________________________________ Time: 02:09:55 AM PST US Subject: Kitfox-List: Re: figure for service letter 35 From: "dave" http://kitfox.lazair.com/skystar/Service_Letters/index.htm -------- Rotax Dealer, Ontario Canada http://www.cfisher.com/ Awesome *New Forum * http://rotaxaircraft.com/forum/ Realtime Kitfox movies to separate the internet chatter from the truth http://www.youtube.com/profile_videos?user=kitfoxflyer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313965#313965 ________________________________ Message 2 _____________________________________ Time: 03:13:37 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: Jabiru You might try asking this question at: jabiruengine-list@matronics.com or: jabiruengines@yahoogroups.com Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062 Sensenich 62"x46" Wood (summer) Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying...1054 hrs (since 3-27-2006) do not archive On Sep 27, 2010, at 3:57 PM, larry huntley wrote: > > > Hello Folks, > Are there any used Jabiru engines available? Larry > > ________________________________ Message 3 _____________________________________ Time: 03:40:53 AM PST US From: "larry huntley" Subject: Re: Kitfox-List: Jabiru Thanx for the Jabiru info folks. I am checking them out. Much appreciated. Larry ----- Original Message ----- From: "Lynn Matteson" Sent: Tuesday, September 28, 2010 6:11 AM Subject: Re: Kitfox-List: Jabiru > > You might try asking this question at: jabiruengine-list@matronics.com > > or: jabiruengines@yahoogroups.com > > Lynn Matteson > Kitfox IV Speedster, taildragger > Jabiru 2200, #2062 > Sensenich 62"x46" Wood (summer) > Electroair direct-fire ignition system > Rotec TBI-40 injection > Status: flying...1054 hrs (since 3-27-2006) > do not archive > > > On Sep 27, 2010, at 3:57 PM, larry huntley wrote: > >> >> >> Hello Folks, >> Are there any used Jabiru engines available? Larry >> >> >> >> > > -------------------------------------------------------------------------------- Checked by AVG - www.avg.com 02:34:00 ________________________________ Message 4 _____________________________________ Time: 02:54:15 PM PST US From: Kitfox George Subject: Re: Kitfox-List: Sealant for header tank fittings Thanks for the great info!=0A-George=0AKitfox Sport, almost, but not yet! =0Ado not archive ________________________________ Message 5 _____________________________________ Time: 07:13:40 PM PST US Subject: Kitfox-List: Re: figure for service letter 35 From: "jridgway" thanks...jack [Wink] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314050#314050 ________________________________ Message 6 _____________________________________ Time: 09:35:32 PM PST US Subject: Kitfox-List: Prop balancer for 582 From: "carlisle" Has anyone ever tried one of these? http://store.leadingedgeairfoils.com/product_info.php?products_id=12550 Chris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314064#314064 ________________________________ Message 7 _____________________________________ Time: 09:36:07 PM PST US Subject: Kitfox-List: Re: Sealant for header tank fittings From: "Roger Lee" A very good product that some of the race car driver's use, auto mechanics, aviation mechanics and SLSA Mfg's is "Hylomar" Universal Blue gasket and joint sealing compound. Use a film on the bulkhead plates,t gaskets or fittings all the way around and both sides. This stuff is very sticky so what ever you touch it is there until you use a little lacquer thinner to remove it. Let it flash or dry for a few minutes and assemble. Do not apply a glob as it will squish out and get into the fuel system and it will cause you headaches. A little is good, a lot is not better. You can buy this Hylomar on line from several sources as it is very common. I tube should be plenty. I use this on all my leaks as recommended by a few Mfg's and have never had a repeat leak. -------- Roger Lee Tucson, Az. Light Sport Repairman - Maintenance Rated Rotax Repair Center 520-574-1080 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314065#314065 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.