---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Tue 10/05/10: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:26 AM - Re: Re: 912 mid range power problem (Lynn Matteson) 2. 01:57 PM - Re: Sealant for header tank fittings (mikeperkins) 3. 02:11 PM - Re: Re: Sealant for header tank fittings (Vic Baker) 4. 03:01 PM - Re: Re: Sealant for header tank fittings (Dave Fisher) ________________________________ Message 1 _____________________________________ Time: 03:26:20 AM PST US From: Lynn Matteson Subject: Re: Kitfox-List: Re: 912 mid range power problem Give him a break, Pat, he's from Ohio! (ducking.....) : ) Hey, Keith, did you go to MERFI this year? Lynn Matteson Kitfox IV Speedster, taildragger Jabiru 2200, #2062 Sensenich 62"x46" Wood (summer) Electroair direct-fire ignition system Rotec TBI-40 injection Status: flying...1054 hrs (since 3-27-2006) do not archive On Oct 4, 2010, at 7:03 PM, Patrick Reilly wrote: > Keith, Moving the needle clips "up" drops the needle farther into > the jet and makes your midrange leaner, not richer. > > Pat Reilly > Mod 3 582 Rebuilt > Rockford, IL > > On Mon, Oct 4, 2010 at 4:44 PM, n61kf wrote: > > Well, moving the needles up one notch seems to be the answer. It > runs much smoother from idle up to full power now. At least on the > ground. Tomorrow I will sync the carbs , put on the cowl, and go > fly. After a few hours I will check the plugs for color, to see if > I have gone too rich. > Thanks all for the advice. > > Keith > > -------- > Keith Schneider > Red Stewart Airfield > Waynesville Ohio > KF IV 912ul > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=314680#314680 > ist Un/Subscription, > www.matronics.com/Navigator?Kitfox-List" target="_blank">http:// > www.matronics.com/Navigator?Kitfox-List > ronics.com/" target="_blank">http://forums.matronics.com > Matt Dralle, List Admin. > ==== > > > -- > Pat Reilly > Mod 3 582 Rebuild > Rockford,IL > www.matronics.com/contribution _- > =========================================================== ________________________________ Message 2 _____________________________________ Time: 01:57:26 PM PST US Subject: Kitfox-List: Re: Sealant for header tank fittings From: "mikeperkins" If it's all the same to you guys, I think I'll keep using my Dow 730. Seventeen years and not a hint of a leak. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=314841#314841 ________________________________ Message 3 _____________________________________ Time: 02:11:18 PM PST US From: "Vic Baker" Subject: Re: Kitfox-List: Re: Sealant for header tank fittings I'm with Mike on this one. Just ordered the Dow 730. A fuel leak is unacceptable. Vic Baker S7 912S Warp Carson City, Nv ----- Original Message ----- From: "mikeperkins" Sent: Tuesday, October 05, 2010 1:54 PM Subject: Kitfox-List: Re: Sealant for header tank fittings > > > If it's all the same to you guys, I think I'll keep using my Dow 730. > Seventeen years and not a hint of a leak. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=314841#314841 > > > ________________________________ Message 4 _____________________________________ Time: 03:01:56 PM PST US From: "Dave Fisher" Subject: Re: Kitfox-List: Re: Sealant for header tank fittings http://www.behrents.com/p/EARD024.html Plumbers putty LOL better spend 100$ ? WTHeck ? no leaks here >>>>>>>>. http://www.youtube.com/watch?v=Yg1qKTvHOAg 21,850 views http://www.youtube.com/watch?v=itqyBYxU0lU 14,009 views http://www.youtube.com/watch?v=ed1VRxzH0iU 2,576 views ethanol powered Rotax yah --no issues to date ===> YET say no to AVGAS ----- Original Message ----- From: "Vic Baker" Sent: Tuesday, October 05, 2010 5:08 PM Subject: Re: Kitfox-List: Re: Sealant for header tank fittings > > I'm with Mike on this one. Just ordered the Dow 730. A fuel leak is > unacceptable. > > > > Vic Baker > S7 912S Warp > Carson City, Nv > ----- Original Message ----- > From: "mikeperkins" > To: > Sent: Tuesday, October 05, 2010 1:54 PM > Subject: Kitfox-List: Re: Sealant for header tank fittings > > >> >> >> If it's all the same to you guys, I think I'll keep using my Dow 730. >> Seventeen years and not a hint of a leak. >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=314841#314841 >> >> >> >> >> >> >> >> >> >> > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.