---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Sat 11/20/10: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:44 AM - GSC PROP PITCH (lane taylor) 2. 08:20 AM - Re: GSC PROP PITCH (Dave Fisher) 3. 10:30 AM - Re: GSC PROP PITCH (lane taylor) ________________________________ Message 1 _____________________________________ Time: 07:44:05 AM PST US From: "lane taylor" Subject: Kitfox-List: GSC PROP PITCH I've built a Model IV--Rotax 618 with a three blade wood GSC GA prop; wondering if anyone's running or ran the combination and if so, what's recommended for a reference prop pitch starting point using the GSC supplied pitching tool? And, what RPM being targeted at full throttle level flight? Appreciate any input. Lane KOCS Model IV-1200 ________________________________ Message 2 _____________________________________ Time: 08:20:06 AM PST US From: "Dave Fisher" Subject: Re: Kitfox-List: GSC PROP PITCH Start are 15 degrees and go from there. Don't overtighten ----- Original Message ----- From: lane taylor To: kitfox-list@matronics.com Sent: Saturday, November 20, 2010 10:41 AM Subject: Kitfox-List: GSC PROP PITCH I've built a Model IV--Rotax 618 with a three blade wood GSC GA prop; wondering if anyone's running or ran the combination and if so, what's recommended for a reference prop pitch starting point using the GSC supplied pitching tool? And, what RPM being targeted at full throttle level flight? Appreciate any input. Lane KOCS Model IV-1200 ________________________________ Message 3 _____________________________________ Time: 10:30:26 AM PST US From: "lane taylor" Subject: Re: Kitfox-List: GSC PROP PITCH Thanks Dave; 8ftlbs--got it. ...Regards Lane ----- Original Message ----- From: Dave Fisher To: kitfox-list@matronics.com Sent: Saturday, November 20, 2010 11:13 AM Subject: Re: Kitfox-List: GSC PROP PITCH Start are 15 degrees and go from there. Don't overtighten ----- Original Message ----- From: lane taylor To: kitfox-list@matronics.com Sent: Saturday, November 20, 2010 10:41 AM Subject: Kitfox-List: GSC PROP PITCH I've built a Model IV--Rotax 618 with a three blade wood GSC GA prop; wondering if anyone's running or ran the combination and if so, what's recommended for a reference prop pitch starting point using the GSC supplied pitching tool? And, what RPM being targeted at full throttle level flight? Appreciate any input. Lane KOCS Model IV-1200 href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?Kitfox-List">http://www.matron href="http://forums.matronics.com">http://forums.matronics.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.