Today's Message Index:
----------------------
1. 08:38 AM - Re: Setting up the Fuel lines (Tom Jones)
2. 11:55 AM - Re: Kitfox-List Digest: 2 Msgs - 12/09/10 (Dennis Huser)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Setting up the Fuel lines |
James, I had mine plumbed like yours are but also did not like the low spot in
the line under the door. I changed it to how the service Bulletin recommends
with the panel tank. In the last picture the line under the windshield screw
on the left is the main line from the wing tank. The other line is the vent.
The vent line is connected to each side of the two high spots of the panel tank
and a T in this line runs to the top of the wing tank. You can see the vent
line and fitting in the top of the wing tank in the site gauge picture.
One advantage of a rear header tank is it makes for a good down hill slope all
the way from the wing tank. In the pictures you can see the slope in the lines
above the door is just about level with the panel tank routing. To get all
the fuel in the wing tank to drain I must fly with that wing high for a little
while.
Service Bulletin #29 http://www.kitfoxaircraft.com/support/service_bulletins/sb29.htm
--------
Tom Jones
Classic IV
503 Rotax, 72 inch Two blade Warp
Ellensburg, WA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=322936#322936
Attachments:
http://forums.matronics.com//files/fuel_lines1_211.jpg
http://forums.matronics.com//files/fuel_lines2_156.jpg
http://forums.matronics.com//files/fuel_lines3_528.jpg
http://forums.matronics.com//files/fuel_lines4_665.jpg
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RE: Kitfox-List Digest: 2 Msgs - 12/09/10 |
Matt,
It appears that your list has been compromised by some who have other than
aircraft in mind. I received the attached Thursday, Dec. 9.
Greetings From sandra,(sandrafrank0@yahoo.com)
Hello
How are you today, I hope all is well with you .I am sorry to worry you with
my Proposal for a relationship with you, but I know that you will grant my
request in good faith and understanding, My name is sandra I just went
Through your profile at (www.matronics.com) I have no options than letting
you Know that I am interested in having a relationship with you, I will also
like to Know you the more, you can send an email to my email address
(sandrafrank0@yahoo.com) so that I can send you more details about my self
Including my picture. I believe we can move from here. But bear in mind that
Love has no colors barrier, no educational back ground barrier,
sandra
sandrafrank0@yahoo.com
-----Original Message-----
From: owner-kitfox-list-server@matronics.com
[mailto:owner-kitfox-list-server@matronics.com] On Behalf Of Kitfox-List
Digest Server
Sent: Friday, December 10, 2010 3:00 AM
Subject: Kitfox-List Digest: 2 Msgs - 12/09/10
*
=================================================
Online Versions of Today's List Digest Archive
=================================================
Today's complete Kitfox-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Kitfox-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
10-12-09&Archive=Kitfox
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
2010-12-09&Archive=Kitfox
===============================================
EMail Version of Today's List Digest Archive
===============================================
----------------------------------------------------------
Kitfox-List Digest Archive
---
Total Messages Posted Thu 12/09/10: 2
----------------------------------------------------------
Today's Message Index:
----------------------
1. 03:48 PM - best way to adjust toe in? (jerry evans)
2. 06:27 PM - Re: best way to adjust toe in? (Malcolm Brubaker)
________________________________ Message 1
_____________________________________
Time: 03:48:33 PM PST US
From: jerry evans <kitfox555@sbcglobal.net>
Subject: Kitfox-List: best way to adjust toe in?
Is there anyone that can tell me the best way to adjust toe in on a Model 2
,- the out side of the right tire is wearing out fast ? Or is it the cam
ber?
Jerry Evans
KitfoxII
Magalia Calif.
N582'er'
kitfox 555
________________________________ Message 2
_____________________________________
Time: 06:27:17 PM PST US
From: Malcolm Brubaker <brubakermal@yahoo.com>
Subject: Re: Kitfox-List: best way to adjust toe in?
i asked the same question a year ago-- but for the life of me i cant re
member =0Awhat i came up with. -i did everything sugested and it seemed v
ery interesting =0Aat the time.- eventualy i just changed the tires- an
d they seemed ok for a =0Awhile-- but now they are wearing out in the s
ame place agin so maybe ill just =0Arotate them---- mal-=0A-Mal
colm Brubaker =0AMichigan Sport=0APilot Repair =0ALSRM-A, PPC, WS=0A(989)51
3-3022 =0A=0A=0A=0A=0A________________________________=0AFrom: jerry evans
<kitfox555@sbcglobal.net>=0ATo: kitfox-list@matronics.com=0ASent: Thu, Dece
mber 9, 2010 6:45:16 PM=0ASubject: Kitfox-List: best way to adjust toe in?
=0A=0A=0AIs there anyone that can tell me the best way to adjust toe in on
a Model 2 ,- =0Athe out side of the right tire is wearing out fast ? Or i
s it the camber?=0A=0A=0AJerry Evans =0AKitfoxII=0AMagalia Calif.=0AN582'er
============ =0A=0A=0A=0A
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|