Today's Message Index:
----------------------
1. 12:38 AM - Re: Flapperons (Michel)
2. 04:40 AM - Re: Re: Flapperons (Jim_and_Lucy Chuk)
3. 06:48 PM - Re: tires wheels (WurlyBird)
4. 07:59 PM - Re: Re: tires wheels (rtmarshall)
5. 09:39 PM - Re: tires wheels (wannafly)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hello everyone,
I haven't post for a long time now. I am still flying my Kitfox 3 with a Jabiru
engine. Actually, here are some photos from a trip from Norway to Friedrichshafen
AERO 2011 exhibition:
http://home.online.no/~michel/aero2011/
Anyway, I just wanted to say that, after perhaps 450 hours with my Kitfox, I still
love her and ... I never use my flaps. As we know, it pitches the nose down
and yes, it increases lift but, to my humble opinion, not so much the drag.
On final, I adjust my speed with side slips. I do it all the way to the threshold,
to land on the numbers. It is perhaps a question of taste but ... trying to
do a three-points landing with my taildragger and induce nose-down by using
the flaps ... I don't feel like it.
The only time I have used my flaps is when taking off from a short field with long
wet grass. Use the flaps to get fast out of the grass, then keep flat above
it to gain speed before initial climb.
Cheers,
Michel
--------
Kitfox 3 - Jabiru 2200
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=339990#339990
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Good to have you back Michel=2C not to long ago it crossed my mind that we
hadn't heard from you in a long time. I had hoped that everything was oke
y with you. You always had good comments and information to post.
Jim Chuk
Avid MK IV (flying)
Kitfox 4 (building slowly)
northern Mn
do not archive
> Subject: Kitfox-List: Re: Flapperons
> From: michel@online.no
> Date: Mon=2C 16 May 2011 00:36:13 -0700
> To: kitfox-list@matronics.com
>
>
> Hello everyone=2C
> I haven't post for a long time now. I am still flying my Kitfox 3 with a
Jabiru engine. Actually=2C here are some photos from a trip from Norway to
Friedrichshafen AERO 2011 exhibition:
> http://home.online.no/~michel/aero2011/
>
> Anyway=2C I just wanted to say that=2C after perhaps 450 hours with my Ki
tfox=2C I still love her and ... I never use my flaps. As we know=2C it pit
ches the nose down and yes=2C it increases lift but=2C to my humble opinion
=2C not so much the drag.
>
> On final=2C I adjust my speed with side slips. I do it all the way to the
threshold=2C to land on the numbers. It is perhaps a question of taste but
... trying to do a three-points landing with my taildragger and induce nos
e-down by using the flaps ... I don't feel like it.
>
> The only time I have used my flaps is when taking off from a short field
with long wet grass. Use the flaps to get fast out of the grass=2C then kee
p flat above it to gain speed before initial climb.
>
> Cheers=2C
> Michel
>
> --------
> Kitfox 3 - Jabiru 2200
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=339990#339990
>
>
>
>
>
>
>
===========
===========
===========
===========
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: tires wheels |
Mal Brubaker had a Speedster that he was parting out, I think he had wheel pants.
Search for his thread and you should be able to get a hold of him.
--------
James
Kitfox 3 / 582 / 70" IVO 2 blade GA
50 hrs on the Fox in between deployments,
now she lies in wait
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340069#340069
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: tires wheels |
Hey thanks James, I just emailed him. Do you fly a frantic palm tree on
the side? I am trying to get my grandson to go naval air, he is NROTC at
LSU. Keep the dirty side down. Bob
--------------------------------------------------
From: "WurlyBird" <james.t.trizzino@us.army.mil>
Sent: Monday, May 16, 2011 6:45 PM
Subject: Kitfox-List: Re: tires wheels
<james.t.trizzino@us.army.mil>
Mal Brubaker had a Speedster that he was parting out, I think he had wheel
pants. Search for his thread and you should be able to get a hold of him.
--------
James
Kitfox 3 / 582 / 70" IVO 2 blade GA
50 hrs on the Fox in between deployments,
now she lies in wait
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340069#340069
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: tires wheels |
I have a set of wheel pants for sale. make me an offer. They are from a model IV
with a 8x6 tires. I have just the pants in excellant shape
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=340089#340089
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|