Today's Message Index:
----------------------
1. 03:10 PM - Bungee Time!! (Dave G)
2. 04:20 PM - Re: Bungee Time!! (Patrick Reilly)
3. 08:52 PM - STRATUS/Soob EA-81 Cooling? (Andy Fultz)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I need to replace the saggy old bungees on my Mod IV 1050. I have looked
through the archives and determined this is a job for two. If anyone has any
ideas that make it quick and easy now would be the time to share.
The bungees I am installing are beige with two red and one yellow stripe.
Been in the package a couple of years. Anyone care to tell me what this code
means cause the ones I am removing are way different for stripes.
Thanks
Dave G. mod IV 1050 582 Warp.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bungee Time!! |
Dave, I replaced mine with Lowell Fitt's bush gear. Try that. It's alot more
work and alot more $ but alot more friendly when I'm doing ground loops.
Pat Reilly
Mod 3 582 Rebuilt
Rockford, IL
On Mon, Jun 20, 2011 at 5:07 PM, Dave G <d.goddard@ns.sympatico.ca> wrote:
> **
>
>
> I need to replace the saggy old bungees on my Mod IV 1050. I have looked
> through the archives and determined this is a job for two. If anyone has any
> ideas that make it quick and easy now would be the time to share.
>
> The bungees I am installing are beige with two red and one yellow stripe.
> Been in the package a couple of years. Anyone care to tell me what this code
> means cause the ones I am removing are way different for stripes.
>
> Thanks
>
> Dave G. mod IV 1050 582 Warp.
>
> *
>
> *
>
>
--
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | STRATUS/Soob EA-81 Cooling? |
Bungee Time!!This one is for those of you running a STRATUS or other Subaru
EA-81 on your AVID or KF. What are
your water temps running on take off climb, cruise climb and at cruise? At
what RPM are you running with the temp numbers you are seeing? I'm just a
little concerned with the temps I'm seeing. 180 before take off and then on
climb out I'm seeing the temp go over 200 pretty quick. If I keep it in a
climb 5000 RPM it'll continue to rise to 215 till I pull the power back to
about 4000 and level off and then it will only come back down to around 200
after a while. If I increase the RPM I'll see the temp start to rise again
even if I stay level. OK I'm listening.
Andy F.
7.1 hours since I got my airworthiness last tuesday
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|