---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Sun 11/13/11: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:33 AM - Make Sure You're Listed! List of Contributors Published in December! (Matt Dralle) 1. 02:19 PM - Re: Kitfox-List Digest: 2 Msgs - 11/12/11 (PMorel) ________________________________ Message 0 _____________________________________ Time: 12:33:57 AM PST US From: Matt Dralle Subject: Kitfox-List: Make Sure You're Listed! List of Contributors Published in December! Dear Listers, The List of Contributors (LOC) is just around the corner! In December I post a list of everyone that so generously made a Contribution to support the Lists. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Won't you take minute and assure that your name is on the upcoming LOC? Tell others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Visa, MasterCard, or Paypal account: http://www.matronics.com/contribution Or, drop a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 USA I would like to thank everyone that has so generously made a Contribution thus far during this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists running and improving! Don't forget to include a little comment about how the Lists have helped you! Thank you! Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 02:19:41 PM PST US From: PMorel Subject: Kitfox-List: Re: Kitfox-List Digest: 2 Msgs - 11/12/11 Lowell, Those dimensions are described perfectly. I'll preform them with stiff cardboard before I bend any metal. Thanks for taking the time to get these dimensions for me. Sounds like you've done these before. Paul ________________________________ From: Kitfox-List Digest Server Sent: Sun, November 13, 2011 3:00:38 AM Subject: Kitfox-List Digest: 2 Msgs - 11/12/11 * ================================================= Online Versions of Today's List Digest Archive ================================================= Today's complete Kitfox-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Kitfox-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-11-12&Archive=Kitfox Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-11-12&Archive=Kitfox =============================================== EMail Version of Today's List Digest Archive =============================================== ---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Sat 11/12/11: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:39 AM - Classic IV Firewall (PMorel) 2. 08:19 AM - Re: Classic IV Firewall (Lowell Fitt) ________________________________ Message 1 _____________________________________ Time: 05:39:34 AM PST US From: PMorel Subject: Kitfox-List: Classic IV Firewall I'm building a Classic IV and was hoping someone has the dimensions of the lower firewall panels. I'll be installing a Rotax 912 and I have the cutout for the starter for the panel. I only need the dimensions for the center and ether left or right panel since I assume they are the same size. Thanks Paul ________________________________ Message 2 _____________________________________ Time: 08:19:06 AM PST US From: "Lowell Fitt" Subject: Re: Kitfox-List: Classic IV Firewall Paul, The dimensions of what I would call the foot wells are : top forward bend begins right below the side engine mount and is 4" to the downward bend. The lower section runs from that bend 10-3/8" to the bottom bend. This results is a foot well that extends forward of the plane of the firewall slightly under 4" at the top, tapering to zero at the bottom. The extension that fits over and around the bottom front of the fuselage is 1-3/8" top to bend and then extends aft under the fuselage 5-3/8". The gap between the foot wells is 6" wide. If this sounds confusing, drop another note. Lowell From: PMorel Sent: Saturday, November 12, 2011 5:36 AM Subject: Kitfox-List: Classic IV Firewall I'm building a Classic IV and was hoping someone has the dimensions of the lower firewall panels. I'll be installing a Rotax 912 and I have the cutout for the starter for the panel. I only need the dimensions for the center and ether left or right panel since I assume they are the same size. Thanks Paul ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.