Today's Message Index:
----------------------
1. 07:32 AM - Re: Kitfox-List Digest: 1 Msgs - 03/27/13 (Joe & Jan Connell)
2. 09:52 AM - Re: Re: Kitfox-List Digest: 1 Msgs - 03/27/13 (Bob & Toodie)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kitfox-List Digest: 1 Msgs - 03/27/13 |
Found this on the internet Bob:
Posted: Wed Jan 11, 2012 3:34 pm Post subject: Radiator Cap for Rotax
912 After a little research, found that the 912 uses a pressure of
1.2 bar for the radiator cap. 1.2 bars is equivalent to 17.4 pound per
square inches.
18 psi caps by Stant are available from amazon.com:
http://www.amazon.com/Stant-10234-Radiator-Cap-PSI/dp/B000B8JUG6
17 psi caps are also available from amazon.com:
http://www.amazon.com/Stant-10251-Radiator-Cap-PSI/dp/B000C8226K
I=99d try one of these rater than shelling out $80. May be that
your local auto parts store can get one for you without the shipping
charge.
John Hart
KFIV
Wilburton, OK
Time: 07:46:18 PM PST US
From: "Bob & Toodie" <rtav8or2@psln.com>
Subject: Kitfox-List: Radiator Cap
Hello fox flyers. Quite awhile back there was a mini discussion on the
STANT pressure cap for the fluid tank on the 912 engine. did anybody
archive that Part number? If you have the number it would be
appreciated, this thing is driving me nuts, of course I am AB normal
anyway. Our computer crashed and I lost all Data that I have been
gathering.
Even in this very cold weather up here I seem to be losing pressure/
and some coolant. Thanks very much.
Bob & Toodie
KF 4/1200
O02.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kitfox-List Digest: 1 Msgs - 03/27/13 |
Hi J&J Thanks for the link, will continue the search for this mystery
mini cap. Bob
From: Joe & Jan Connell
Sent: Thursday, March 28, 2013 7:31 AM
Subject: Kitfox-List: Re: Kitfox-List Digest: 1 Msgs - 03/27/13
Found this on the internet Bob:
Posted: Wed Jan 11, 2012 3:34 pm Post subject: Radiator Cap for Rotax
912 After a little research, found that the 912 uses a pressure of
1.2 bar for the radiator cap. 1.2 bars is equivalent to 17.4 pound per
square inches.
18 psi caps by Stant are available from amazon.com:
http://www.amazon.com/Stant-10234-Radiator-Cap-PSI/dp/B000B8JUG6
17 psi caps are also available from amazon.com:
http://www.amazon.com/Stant-10251-Radiator-Cap-PSI/dp/B000C8226K
I=99d try one of these rater than shelling out $80. May be that
your local auto parts store can get one for you without the shipping
charge.
John Hart
KFIV
Wilburton, OK
Time: 07:46:18 PM PST US
From: "Bob & Toodie" <rtav8or2@psln.com>
Subject: Kitfox-List: Radiator Cap
Hello fox flyers. Quite awhile back there was a mini discussion on the
STANT pressure cap for the fluid tank on the 912 engine. did anybody
archive that Part number? If you have the number it would be
appreciated, this thing is driving me nuts, of course I am AB normal
anyway. Our computer crashed and I lost all Data that I have been
gathering.
Even in this very cold weather up here I seem to be losing pressure/
and some coolant. Thanks very much.
Bob & Toodie
KF 4/1200
O02.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|