Today's Message Index:
----------------------
1. 06:28 AM - SkyView in a KitFox (Michael Kraus)
2. 06:56 AM - Re: SkyView in a KitFox (Richard Weiss)
3. 08:57 AM - intercom function (clemwehner)
4. 11:18 AM - Re: intercom function (Tommy Walker)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | SkyView in a KitFox |
Dynon SkyView in a KitFox
I am looking at installing a Dynon SkyView into a KitFox SS7. I was wonderin
g if anyone else has done this yet and where they mounted the ADHARS and the
autopilot servos. Pictures would be a bonus!!
__________________
-Mike Kraus
RV-4 built and sold
RV-10 built and flying
Radial KitFox SS7 building
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SkyView in a KitFox |
Mike,
Here's a picture of my 10" Skyview installation. The ADAHRS is inside
the upper glovebox (on the right side).
The ADS-B unit is horizontal and the EMS and Mode S Transponder are
mounted on the left side vertically below and slightly outboard of the
ADS-B.
I opted not to use an autopilot.
The Skyview is outstanding, I think you'll be pleased!
Best of luck on your installation.
Rick Weiss
Series V (Skystar s/n 1) Speedster:-)
Rotax 912S, Dynon Sky View
Spruce Creek Fly In, FL
MDKitfox@aol.com
On Jul 9, 2013, at 9:28 AM, Michael Kraus wrote:
>
> Dynon SkyView in a KitFox
> I am looking at installing a Dynon SkyView into a KitFox SS7. I was
wondering if anyone else has done this yet and where they mounted the
ADHARS and the autopilot servos. Pictures would be a bonus!!
> __________________
> -Mike Kraus
> RV-4 built and sold
> RV-10 built and flying
> Radial KitFox SS7 building
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | intercom function |
I installed a Flightline FL-760 radio that has built in intercom into our KFIV.
When the radio receives any signal, it cuts out the intercom. I called the tech
dept at GulfCoast Aviation, the supplier, who told me that was normal in all
radios with intercom. He said it was designed that way so you don't miss any
ATC calls.
It's been a while since I've flown but I don't remember that being true. If that
were true, when the radio was picking up a signal, you'd not be able to talk
over your intercom to the other guy to say things like, "We're on fire, Do you
see the traffic, You're airspeed is too low, or Watch out for those birds".
Do radios with built in intercom cut out the intercom when receiving a signal?
Is the guy from Gulf Coast wrong?
I'd appreciate your thoughts on this, so I can determine if I've got a problem
with the new radio
Clem Wehner
Lawton, OK
KF-IV, 912
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=404300#404300
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: intercom function |
I haven't used the the Flight line radio, but I had two similar radios in
homebuilts and they both worked the way you described.
I don't think you have a problem.
Tommy,
Sent from my Xoom Tablet
On Jul 9, 2013 10:57 AM, "clemwehner" <clemwehner@sbcglobal.net> wrote:
>
> I installed a Flightline FL-760 radio that has built in intercom into our
> KFIV. When the radio receives any signal, it cuts out the intercom. I
> called the tech dept at GulfCoast Aviation, the supplier, who told me that
> was normal in all radios with intercom. He said it was designed that way so
> you don't miss any ATC calls.
>
> It's been a while since I've flown but I don't remember that being true.
> If that were true, when the radio was picking up a signal, you'd not be
> able to talk over your intercom to the other guy to say things like, "We're
> on fire, Do you see the traffic, You're airspeed is too low, or Watch out
> for those birds".
>
> Do radios with built in intercom cut out the intercom when receiving a
> signal? Is the guy from Gulf Coast wrong?
>
> I'd appreciate your thoughts on this, so I can determine if I've got a
> problem with the new radio
>
> Clem Wehner
> Lawton, OK
> KF-IV, 912
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=404300#404300
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|