Today's Message Index:
----------------------
1. 06:35 AM - Prop Bolts (steve@newcap.net)
2. 06:45 AM - Re: Prop Bolts (Patrick Reilly)
3. 07:05 AM - Re: Prop Bolts (lcfitt@sbcglobal.net)
4. 08:13 AM - Re: Prop Bolts (ctmcdowell@comcast.net)
5. 10:16 AM - Re: Prop Bolts (bjones@dmv.com)
6. 11:12 AM - Re: Prop Bolts (ctmcdowell@comcast.net)
7. 04:53 PM - Re: Prop Bolts (Dave)
8. 04:56 PM - Re: Prop Bolts (Dave)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Does anyone know a good place to buy prop bolts? I have a classic iv thats
been in construction for quit a while and would like to finish it off. I
just bought a prop for a Rotax 912, the prop and plate are about 1.25" and
the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time finding
what I think will work.
Steve
--------------------------------------------------------------------
mail2web LIVE Free email based on Microsoft Exchange technology -
http://link.mail2web.com/LIVE
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Steve, A Fastenal store can get you most anything.
Pat Reilly
Mod 3 582 Rebuilt
Rockford, IL
On Tue, Oct 22, 2013 at 8:35 AM, steve@newcap.net <steve@newcap.net> wrote:
>
>
> Does anyone know a good place to buy prop bolts? I have a classic iv tha
ts
> been in construction for quit a while and would like to finish it off. I
> just bought a prop for a Rotax 912, the prop and plate are about 1.25" an
d
> the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time findin
g
> what I think will work.
>
>
> Steve
>
> --------------------------------------------------------------------
> mail2web LIVE ' Free email based on Microsoft=AE Exchange technology -
> http://link.mail2web.com/LIVE
>
>
===========
===========
===========
===========
>
>
--
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|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Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I just bought my Propeller bolts from Aircraaft Spruce. Jabiru 2200 spinnin
g a Prince propeller.-'Lion8'
----- Original Message -----
From: lcfitt@sbcglobal.net
Sent: Tuesday, October 22, 2013 10:05:50 AM
Subject: Re: Kitfox-List: Prop Bolts
I have always used Aircraft Spruce for An and Metric bolts. Just checked an
d the have the 8 mm prop bolts.
Lowell
Sent via DroidX2 on Verizon Wireless=84=A2
-----Original message-----
From: "steve@newcap.net" <steve@newcap.net>
Sent: Tue, Oct 22, 2013 13:40:43 GMT+00:00
Subject: Kitfox-List: Prop Bolts
Does anyone know a good place to buy prop bolts? I have a classic iv thats
been in construction for quit a while and would like to finish it off. I
just bought a prop for a Rotax 912, the prop and plate are about 1.25" and
the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time finding
what I think will work.
Steve
--------------------------------------------------------------------
mail2web LIVE =C2' Free email based on Microsoft=C2=AE Exchange technolog
y -
http://link.mail2web.com/LIVE
===========
===========
===========
===========
=EF=BD=EF=BD=EF=BD~=EF=BD=EF=BD,=EF=BD=EF=BD=EF=BD%
=EF=BD=EF=BDM4=EF=BD=EF=BD=EF=BDx=EF=BD=EF=BD=EF=BD
=EF=BDw=EF=BDr=EF=BD=EF=BD=EF=BD=EF=BD
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
assume you tried the prop manufacturer for the appropriate prop bolts and
any related hardware such as spacers , crush washers, you may be surprised
what else is called for.
bj 1995 kf 4 912
> Steve, A Fastenal store can get you most anything.
>
> Pat Reilly
> Mod 3 582 Rebuilt
> Rockford, IL
>
>
> On Tue, Oct 22, 2013 at 8:35 AM, steve@newcap.net <steve@newcap.net>
> wrote:
>
>>
>>
>> Does anyone know a good place to buy prop bolts? I have a classic iv
>> thats
>> been in construction for quit a while and would like to finish it off.
>> I
>> just bought a prop for a Rotax 912, the prop and plate are about 1.25"
>> and
>> the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time
>> finding
>> what I think will work.
>>
>>
>> Steve
>>
>> --------------------------------------------------------------------
>> mail2web LIVE Free email based on Microsoft Exchange technology -
>> http://link.mail2web.com/LIVE
>>
>>
>>
>>
> ===========
> ===========
> ===========
> ===========
>>
>>
>>
>>
>
>
> --
> Pat Reilly
> Mod 3 582 Rebuild
> Rockford,IL
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
got it covered
----- Original Message -----
From: bjones@dmv.com
Sent: Tuesday, October 22, 2013 1:14:52 PM
Subject: Re: Kitfox-List: Prop Bolts
assume you tried the prop manufacturer for the appropriate prop bolts and
any related hardware such as spacers , crush washers, you may be surprised
what else is called for.
bj 1995 kf 4 912
> Steve, A Fastenal store can get you most anything.
>
> Pat Reilly
> Mod 3 582 Rebuilt
> Rockford, IL
>
>
> On Tue, Oct 22, 2013 at 8:35 AM, steve@newcap.net <steve@newcap.net>
> wrote:
>
>>
>>
>> Does anyone know a good place to buy prop bolts? I have a classic iv
>> thats
>> been in construction for quit a while and would like to finish it off.
>> I
>> just bought a prop for a Rotax 912, the prop and plate are about 1.25"
>> and
>> the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time
>> finding
>> what I think will work.
>>
>>
>> Steve
>>
>> --------------------------------------------------------------------
>> mail2web LIVE =93 Free email based on Microsoft=C2=AE Exchange tec
hnology -
>> http://link.mail2web.com/LIVE
>>
>>
>>
>>
> ============
> ============
> ============
> ============
>>
>>
>>
>>
>
>
> --
> Pat Reilly
> Mod 3 582 Rebuild
> Rockford,IL
>
===========
===========
===========
===========
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Agree Lowell.
Get AN bolts for your prop
DO NOT BUY from FASTENAL...................
The quality control is Poor adt bestd and inconsistent
----- Original Message -----
From: lcfitt@sbcglobal.net
To: kitfox-list@matronics.com
Sent: Tuesday, October 22, 2013 10:05 AM
Subject: Re: Kitfox-List: Prop Bolts
I have always used Aircraft Spruce for An and Metric bolts. Just
checked and the have the 8 mm prop bolts.
Lowell
Sent via DroidX2 on Verizon Wireless=84=A2
-----Original message-----
From: "steve@newcap.net" <steve@newcap.net>
To: kitfox-list@matronics.com
Sent: Tue, Oct 22, 2013 13:40:43 GMT+00:00
Subject: Kitfox-List: Prop Bolts
Does anyone know a good place to buy prop bolts? I have a classic iv
thats
been in construction for quit a while and would like to finish it
off. I
just bought a prop for a Rotax 912, the prop and plate are about
1.25" and
the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time
finding
what I think will work.
Steve
--------------------------------------------------------------------
mail2web LIVE =C2' Free email based on Microsoft=C2=AE Exchange
technology -
http://link.mail2web.com/LIVE
=EF=BD=EF=BD=EF=BD~=EF=BD=EF=BD=EF=BD,=EF=BD=03g(=EF
=BD=EF=BD=EF=BDM=EF=BDGq=EF=BDz=EF=BD=EF=BD
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
NOT FASTENAL
They are POOR choice.
Take it from a guy who spends millions of dollars a week and I refuse to
buy any fasteners/harware of lifting devices from Fastenal.
Due to they buy chinese and quality is poor at best.
You need certified in the real world guys and in aviation it is the real
world.
Dave
----- Original Message -----
From: Patrick Reilly
To: kitfox-list@matronics.com
Sent: Tuesday, October 22, 2013 9:45 AM
Subject: Re: Kitfox-List: Prop Bolts
Steve, A Fastenal store can get you most anything.
Pat Reilly
Mod 3 582 Rebuilt
Rockford, IL
On Tue, Oct 22, 2013 at 8:35 AM, steve@newcap.net <steve@newcap.net>
wrote:
<steve@newcap.net>
Does anyone know a good place to buy prop bolts? I have a classic
iv thats
been in construction for quit a while and would like to finish it
off. I
just bought a prop for a Rotax 912, the prop and plate are about
1.25" and
the 912 is pre 1995 so requires 8MM bolts. I'm having a hard time
finding
what I think will work.
Steve
--------------------------------------------------------------------
mail2web LIVE ' Free email based on Microsoft=AE Exchange
technology -
http://link.mail2web.com/LIVE
==========
target="_blank">http://www.matronics.com/Navigator?Kitfox-List
==========
http://forums.matronics.com
==========
le, List Admin.
="_blank">http://www.matronics.com/contribution
==========
--
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|