Today's Message Index:
----------------------
1. 02:09 PM - Re: Clutch (Lynn Matteson)
2. 02:14 PM - Re: Merry Christmas (Lynn Matteson)
3. 03:17 PM - Re: Merry Christmas (Mark Donahue)
4. 07:34 PM - Re: Merry Christmas (Michael Gibbs)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I agree that TeamKitfox is labor intensive to deal with, but I got
some great advice there (finally) about mounting my almost-finished
Zenair floats to my plane. What I don't like about it is that I have
to actually go TO the site to get any info....unless I'm too dumb to
figure out how to get on an email list and have the stuff "delivered"
to my desktop.
Lynn Matteson
Kitfox IV Speedster, taildragger
JabiLynn 2200, #2062
Prince prop 64 x 30, P-tip
Electroair direct-fire ignition system
Rotec TBI-40 injection (sleeved to 36mm)
Status: flying with 1601 hrs... (since 3-27-2006)
On Dec 25, 2014, at 8:57 AM, Patrick Reilly wrote:
> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I
> tried a couple of days ago to get into the site, After trying to
> get into the site for 15 minutes answering every question about me,
> except my mother's hat size, I gave up. That site is about as
> convoluted as the IRS tax filing system.
> Marco replied to my search for a clutch. He said he'd sell me his
> for $18K and throw in the plane for free. That was the only
> response I had.
> A post showed up 2 days ago from a Kitfoxer that went to Boise ID
> to fly at the Stick & Rudder Kitfox school. That same day the Kit
> Plane mag showed up with an article about that school. I told my
> wife my were going to Boise ID for vacation.
>
> Pat Reilly
> Mod 3 583 Rebuilt
> Rockford, IL
>
> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson <lynnmatt@jps.net>
> wrote:
>
> Hi Pat-
> This is the first email that I've received from the Matronics
> Kitfox list in ages, but it is still working as far as it
> goes....just VERY low in frequency of posts. Everyone has gone over
> to TeamKitfox, I guess.
>
> Lynn Matteson
> Kitfox IV Speedster, taildragger
> Jabiru 2200, #2062
> Prince prop 64 x 30, P-tip
> Electroair direct-fire ignition system
> Rotec TBI-40 injection (sleeved to 36mm)
> Status: flying with 1599 hrs... (since 3-27-2006)
>
>
> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote:
>
> Marco, Thanks for the offer. But, not exactly what I had in mind. I
> didn't get a posting to my email through Matronics. just a notice
> that a reply was made to the topic. I had to key into Matronics. I
> wonder if something has changed. I haven't seen any Kitfox
> Matronics postings directly to me as in the past?
>
> --
> Pat Reilly
> Mod 3 582 Rebuild
> Rockford,IL
> ==================================
>
>
> ===================================
> br> fts!)
> r> > eroelectric.com" target="_blank">www.aeroelectric.com
> w.buildersbooks.com" target="_blank">www.buildersbooks.com
> p.com" target="_blank">www.homebuilthelp.com
> e.com" target="_blank">www.mypilotstore.com
> " target="_blank">www.mrrace.com
> target="_blank">http://www.matronics.com/contribution
> -Matt Dralle, List Admin.
> ===================================
> ox-List" target="_blank">http://www.matronics.com/Navigator?Kitfox-
> List
> ===================================
> FORUMS -
> _blank">http://forums.matronics.com
> ===================================
>
>
> --
> Pat Reilly
> Mod 3 582 Rebuild
> Rockford,IL
> ===========================================================
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Merry Christmas |
I hear you, Lowell....how about makin' it somewhere centrally
located....like Michigan, for example. : )
Lynn Matteson
Kitfox IV Speedster, taildragger
JabiLynn 2200, #2062
Prince prop 64 x 30, P-tip
Electroair direct-fire ignition system
Rotec TBI-40 injection (sleeved to 36mm)
Status: flying with 1601 hrs... (since 3-27-2006)
On Dec 25, 2014, at 1:48 PM, lcfitt@sbcglobal.net wrote:
> Merry Christmas!
> Without a doubt a post from Matronics will lift my spirits - any
> post. I sure hope this doesn't sound like the ravings of an old
> man, but I do sincerely cherish the "good old days". I feel I have
> a wealth of friends - most I have never met - but friends never the
> less. I guess my fantasy would be a Matronics Kitfox Fly- in,
> Reunion or what ever, just because.
> Lowell
>
> Sent via DroidX2 on Verizon Wireless
>
>
> -----Original message-----
> From: Guy Buchanan <gebuchanan@cox.net>
> To: "kitfox-list@matronics.com" <kitfox-list@matronics.com>
> Sent: Thu, Dec 25, 2014 15:17:31 GMT+00:00
> Subject: Kitfox-List: Merry Christmas
>
> Merry Christmas to the few of you left on the list!
>
> Guy Buchanan
> List Moderator
>
> Sent from my iPod
>
> On Dec 25, 2014, at 6:57 AM, Patrick Reilly <patreilly43@gmail.com>
> wrote:
>
>> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I
>> tried a couple of days ago to get into the site, After trying to
>> get into the site for 15 minutes answering every question about
>> me, except my mother's hat size, I gave up. That site is about as
>> convoluted as the IRS tax filing system.
>> Marco replied to my search for a clutch. He said he'd sell me his
>> for $18K and throw in the plane for free. That was the only
>> response I had.
>> A post showed up 2 days ago from a Kitfoxer that went to Boise ID
>> to fly at the Stick & Rudder Kitfox school. That same day the Kit
>> Plane mag showed up with an article about that school. I told my
>> wife my were going to Boise ID for vacation.
>>
>> Pat Reilly
>> Mod 3 583 Rebuilt
>> Rockford, IL
>>
>> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson <lynnmatt@jps.net>
>> wrote:
>>
>> Hi Pat-
>> This is the first email that I've received from the Matronics
>> Kitfox list in ages, but it is still working as far as it
>> goes....just VERY low in frequency of posts. Everyone has gone
>> over to TeamKitfox, I guess.
>>
>> Lynn Matteson
>> Kitfox IV Speedster, taildragger
>> Jabiru 2200, #2062
>> Prince prop 64 x 30, P-tip
>> Electroair direct-fire ignition system
>> Rotec TBI-40 injection (sleeved to 36mm)
>> Status: flying with 1599 hrs... (since 3-27-2006)
>>
>>
>> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote:
>>
>> Marco, Thanks for the offer. But, not exactly what I had in mind.
>> I didn't get a posting to my email through Matronics. just a
>> notice that a reply was made to the topic. I had to key into
>> Matronics. I wonder if something has changed. I haven't seen any
>> Kitfox Matronics postings directly to me as in the past?
>>
>> --
>> Pat Reilly
>> Mod 3 582 Rebuild
>> Rockford,IL
>> ==================================
>>
>>
>> ===================================
>> br> fts!)
>> r> > eroelectric.com" target="_blank">www.aeroelectric.com
>> w.buildersbooks.com" target="_blank">www.buildersbooks.com
>> p.com" target="_blank">www.homebuilthelp.com
>> e.com" target="_blank">www.mypilotstore.com
>> " target="_blank">www.mrrace.com
>> target="_blank">http://www.matronics.com/contribution
>> -Matt Dralle, List Admin.
>> ===================================
>> ox-List" target="_blank">http://www.matronics.com/Navigator?Kitfox-
>> List
>> ===================================
>> FORUMS -
>> _blank">http://forums.matronics.com
>> ===================================
>>
>>
>>
>>
>>
>>
>> --
>> Pat Reilly
>> Mod 3 582 Rebuild
>> Rockford,IL
>> D=======================3
>> D====================== o
>> t;">www.aeroelectric.combooks.com"">www.buildersbooks.comquot;">www.h
>> omebuilthelp.comquot;">www.mypilotstore.com">www.mrrace.comot;">http:
>> //www.matronics.com/
>> contributionD===================3
>> D=======================3
>> D=== x-List"">http://www.matronics.com/Navigator?Kitfox-
>> ListD======================
>> 3D=======================
>> 3D //
>> forums.matronics.comD================
>> =======================
>> =====
> ============================================================ _-
> ============================================================ _-
> ===========================================================
> ============================================================ _-
> ============================================================ _-
> ===========================================================
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I miss my Kitfox friends too. Would be great to get together.
Happy Holidays to you all.
Mark Donahue
Kitfox IV 1050
Bainbridge Island, Washington
-----Original Message-----
From: owner-kitfox-list-server@matronics.com
[mailto:owner-kitfox-list-server@matronics.com] On Behalf Of Lynn Matteson
Sent: Friday, December 26, 2014 2:15 PM
Subject: Re: Kitfox-List: Merry Christmas
I hear you, Lowell....how about makin' it somewhere centrally
located....like Michigan, for example. : )
Lynn Matteson
Kitfox IV Speedster, taildragger
JabiLynn 2200, #2062
Prince prop 64 x 30, P-tip
Electroair direct-fire ignition system
Rotec TBI-40 injection (sleeved to 36mm)
Status: flying with 1601 hrs... (since 3-27-2006)
On Dec 25, 2014, at 1:48 PM, lcfitt@sbcglobal.net wrote:
> Merry Christmas!
> Without a doubt a post from Matronics will lift my spirits - any post.
> I sure hope this doesn't sound like the ravings of an old man, but I
> do sincerely cherish the "good old days". I feel I have a wealth of
> friends - most I have never met - but friends never the
> less. I guess my fantasy would be a Matronics Kitfox Fly- in,
> Reunion or what ever, just because.
> Lowell
>
> Sent via DroidX2 on Verizon WirelessT
>
>
> -----Original message-----
> From: Guy Buchanan <gebuchanan@cox.net>
> To: "kitfox-list@matronics.com" <kitfox-list@matronics.com>
> Sent: Thu, Dec 25, 2014 15:17:31 GMT+00:00
> Subject: Kitfox-List: Merry Christmas
>
> Merry Christmas to the few of you left on the list!
>
> Guy Buchanan
> List Moderator
>
> Sent from my iPod
>
> On Dec 25, 2014, at 6:57 AM, Patrick Reilly <patreilly43@gmail.com>
> wrote:
>
>> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I
>> tried a couple of days ago to get into the site, After trying to get
>> into the site for 15 minutes answering every question about me,
>> except my mother's hat size, I gave up. That site is about as
>> convoluted as the IRS tax filing system.
>> Marco replied to my search for a clutch. He said he'd sell me his for
>> $18K and throw in the plane for free. That was the only response I
>> had.
>> A post showed up 2 days ago from a Kitfoxer that went to Boise ID to
>> fly at the Stick & Rudder Kitfox school. That same day the Kit Plane
>> mag showed up with an article about that school. I told my wife my
>> were going to Boise ID for vacation.
>>
>> Pat Reilly
>> Mod 3 583 Rebuilt
>> Rockford, IL
>>
>> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson <lynnmatt@jps.net>
>> wrote:
>>
>> Hi Pat-
>> This is the first email that I've received from the Matronics Kitfox
>> list in ages, but it is still working as far as it goes....just VERY
>> low in frequency of posts. Everyone has gone over to TeamKitfox, I
>> guess.
>>
>> Lynn Matteson
>> Kitfox IV Speedster, taildragger
>> Jabiru 2200, #2062
>> Prince prop 64 x 30, P-tip
>> Electroair direct-fire ignition system Rotec TBI-40 injection
>> (sleeved to 36mm)
>> Status: flying with 1599 hrs... (since 3-27-2006)
>>
>>
>> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote:
>>
>> Marco, Thanks for the offer. But, not exactly what I had in mind.
>> I didn't get a posting to my email through Matronics. just a notice
>> that a reply was made to the topic. I had to key into Matronics. I
>> wonder if something has changed. I haven't seen any Kitfox Matronics
>> postings directly to me as in the past?
>>
>> --
>> Pat Reilly
>> Mod 3 582 Rebuild
>> Rockford,IL
>> ==================================
>>
>>
>> ===================================
>> br> fts!)
>> r> > eroelectric.com" target="_blank">www.aeroelectric.com
>> w.buildersbooks.com" target="_blank">www.buildersbooks.com
>> p.com" target="_blank">www.homebuilthelp.com
>> e.com" target="_blank">www.mypilotstore.com
>> " target="_blank">www.mrrace.com
>> target="_blank">http://www.matronics.com/contribution
>> -Matt Dralle, List Admin.
>> ===================================
>> ox-List" target="_blank">http://www.matronics.com/Navigator?Kitfox-
>> List
>> ===================================
>> FORUMS -
>> _blank">http://forums.matronics.com
>> ===================================
>>
>>
>>
>>
>>
>>
>> --
>> Pat Reilly
>> Mod 3 582 Rebuild
>> Rockford,IL
>> D=======================3
>> D====================== o
>> t;">www.aeroelectric.combooks.com"">www.buildersbooks.comquot;">www.h
>> omebuilthelp.comquot;">www.mypilotstore.com">www.mrrace.comot;">http:
>> //www.matronics.com/
>> contributionD===================3
>> D=======================3
>> D=== x-List"">http://www.matronics.com/Navigator?Kitfox-
>> ListD=====================
>> 3D======================
>> 3D //
>> forums.matronics.comD===============
>> ======================
>> =====
> ============================================================ _-
> ============================================================ _-
> ===========================================================
> ============================================================ _-
> ============================================================ _-
> ===========================================================
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Merry Christmas |
Isn't Arizona closer to the middle? :-)
Mike G.
Kitfox IV-1200 Speedster, Series 6
Phoenix, AZ
> On Dec 26, 2014, at 3:14 PM, Lynn Matteson <lynnmatt@jps.net> wrote:
>
>
> I hear you, Lowell....how about makin' it somewhere centrally located....like
Michigan, for example. : )
>
> Lynn Matteson
> Kitfox IV Speedster, taildragger
> JabiLynn 2200, #2062
> Prince prop 64 x 30, P-tip
> Electroair direct-fire ignition system
> Rotec TBI-40 injection (sleeved to 36mm)
> Status: flying with 1601 hrs... (since 3-27-2006)
>
>
>
>
>
>
>> On Dec 25, 2014, at 1:48 PM, lcfitt@sbcglobal.net wrote:
>>
>> Merry Christmas!
>> Without a doubt a post from Matronics will lift my spirits - any post. I sure
hope this doesn't sound like the ravings of an old man, but I do sincerely
cherish the "good old days". I feel I have a wealth of friends - most I have
never met - but friends never the less. I guess my fantasy would be a Matronics
Kitfox Fly- in, Reunion or what ever, just because.
>> Lowell
>>
>> Sent via DroidX2 on Verizon Wireless
>>
>>
>> -----Original message-----
>> From: Guy Buchanan <gebuchanan@cox.net>
>> To: "kitfox-list@matronics.com" <kitfox-list@matronics.com>
>> Sent: Thu, Dec 25, 2014 15:17:31 GMT+00:00
>> Subject: Kitfox-List: Merry Christmas
>>
>> Merry Christmas to the few of you left on the list!
>>
>> Guy Buchanan
>> List Moderator
>>
>> Sent from my iPod
>>
>>> On Dec 25, 2014, at 6:57 AM, Patrick Reilly <patreilly43@gmail.com> wrote:
>>>
>>> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I tried a couple
of days ago to get into the site, After trying to get into the site for 15
minutes answering every question about me, except my mother's hat size, I gave
up. That site is about as convoluted as the IRS tax filing system.
>>> Marco replied to my search for a clutch. He said he'd sell me his for $18K
and throw in the plane for free. That was the only response I had.
>>> A post showed up 2 days ago from a Kitfoxer that went to Boise ID to fly at
the Stick & Rudder Kitfox school. That same day the Kit Plane mag showed up with
an article about that school. I told my wife my were going to Boise ID for
vacation.
>>>
>>> Pat Reilly
>>> Mod 3 583 Rebuilt
>>> Rockford, IL
>>>
>>> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson <lynnmatt@jps.net> wrote:
>>>
>>> Hi Pat-
>>> This is the first email that I've received from the Matronics Kitfox list in
ages, but it is still working as far as it goes....just VERY low in frequency
of posts. Everyone has gone over to TeamKitfox, I guess.
>>>
>>> Lynn Matteson
>>> Kitfox IV Speedster, taildragger
>>> Jabiru 2200, #2062
>>> Prince prop 64 x 30, P-tip
>>> Electroair direct-fire ignition system
>>> Rotec TBI-40 injection (sleeved to 36mm)
>>> Status: flying with 1599 hrs... (since 3-27-2006)
>>>
>>>
>>> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote:
>>>
>>> Marco, Thanks for the offer. But, not exactly what I had in mind. I didn't
get a posting to my email through Matronics. just a notice that a reply was made
to the topic. I had to key into Matronics. I wonder if something has changed.
I haven't seen any Kitfox Matronics postings directly to me as in the past?
>>>
>>> --
>>> Pat Reilly
>>> Mod 3 582 Rebuild
>>> Rockford,IL
>>> ==================================
>>>
>>>
>>> ===================================
>>> br> fts!)
>>> r> > eroelectric.com" target="_blank">www.aeroelectric.com
>>> w.buildersbooks.com" target="_blank">www.buildersbooks.com
>>> p.com" target="_blank">www.homebuilthelp.com
>>> e.com" target="_blank">www.mypilotstore.com
>>> " target="_blank">www.mrrace.com
>>> target="_blank">http://www.matronics.com/contribution
>>> -Matt Dralle, List Admin.
>>> ===================================
>>> ox-List" target="_blank">http://www.matronics.com/Navigator?Kitfox-List
>>> ===================================
>>> FORUMS -
>>> _blank">http://forums.matronics.com
>>> ===================================
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Pat Reilly
>>> Mod 3 582 Rebuild
>>> Rockford,IL
>>> D============================================= ot;">www.aeroelectric.combooks.com"">www.buildersbooks.comquot;">www.homebuilthelp.comquot;">www.mypilotstore.com">www.mrrace.comot;">http://www.matronics.com/contributionD============================================= x-List"">http://www.matronics.com/Navigator?Kitfox-ListD============================================= //forums.matronics.comD============================================
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|