Kitfox-List Digest Archive

Sun 12/28/14


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 01:38 AM - Re: Merry Christmas (Michel)
     2. 07:09 AM - Re: Kitfox brand visibility (Catz631@aol.com)
     3. 07:12 AM - Re: Re: Merry Christmas (Guy Buchanan)
     4. 07:25 AM - Bj"s Email (jareds)
     5. 08:50 AM - Re: Bj"s Email (Lowell Fitt)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:38:44 AM PST US
    Subject: Re: Merry Christmas
    From: "Michel" <michel@online.no>
    Season greetings from Norway! I am still flying my Kitfox although a bit less since I had a mild stroke that affected my sight for a short while, last summer. But now I am just fine and if I can't keep my medical, I'll still fly but then, with my son as PIC! ;-) Cheers, Michel Kitfox 3 - Jabiru 2200 -------- Kitfox 3 - Jabiru 2200 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=436348#436348


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:09:56 AM PST US
    From: Catz631@aol.com
    Subject: Re: Kitfox brand visibility
    BJ, Years ago I too went through the just aircraft factory and looked at the Highlander. I have a mountain cabin just North of there. I really enjoyed touring the factory and the "airstrip" (boat ramp) in front of the factory ! I would have bought one except for the money. I sure like them. But I bought a Kitfox instead (same model and engine as you have) I have had to work on my engine a lot. Mostly ignition problems. The latest now I think is a "trigger coil" problem. I am going to run it over to Mississippi and have Ronnie Smith pull the engine ,install new rubber mounts,and check out the bad mag check I am getting. I have done as much trouble shooting as I can and am tired of messing with it. Seems to be an ongoing problem with my engine.(broken wires from the charge coils,bad plugs, ignition harness,caps,etc) I have modified my 4 a lot with the bush gear,electric trim,Kiev prop and many other things . I now have a very nice flying airplane. The mods really made a difference ! Take care, Dick Maddux


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:12:46 AM PST US
    Subject: Re: Merry Christmas
    From: Guy Buchanan <gebuchanan@cox.net>
    Merry Christmas Michel. Glad to see you're still flying. I still have dreams of visiting you in Norway with my Fox. Guy Sent from my iPod > On Dec 28, 2014, at 2:38 AM, Michel <michel@online.no> wrote: > > > Season greetings from Norway! I am still flying my Kitfox although a bit less since I had a mild stroke that affected my sight for a short while, last summer. But now I am just fine and if I can't keep my medical, I'll still fly but then, with my son as PIC! ;-) > > Cheers, > Michel > Kitfox 3 - Jabiru 2200 > > -------- > Kitfox 3 - Jabiru 2200 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=436348#436348 > > > > > > > > > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:25:41 AM PST US
    From: jareds <jareds@verizon.net>
    Subject: Bj"s Email
    Greetings, I'm still on the list occasionally. Just replaced engine and hope to get it up and running more likely in spring as we keep getting snow in South Dakota! BJ really summed up the sentiments of this list. I couldnt have gotten my plane running nor kept it going without the reassurance of all my fixes and improvements from this list!! Everyone is so gracious offering even a home phone number in most cases to "talk over" a piece of advice!! Safe Flying everyone!! Jared Schott 67YF On 12/27/2014 6:39 PM, bjones@dmv.com wrote: > --> Kitfox-List message posted by: bjones@dmv.com > > Guys, > > I have enjoyed and learned from the Matronics Kitfox list serve over the > years, recognizing lots of names and appreciating your insights. > > If I get an e-mail from the Matronics Kitfox list serve I read it. Love > too by the way. Even if the subject does not seem of interest to me at the > moment. The experience and knowledge in the Kitfox builder/owner community > is really important to keep on the front burner and thriving for everyone > who owns or who probably should have the brand clearly on their radar > screen. > > E-mails from Team Kitfox don't just appear in my IN BOX, (maybe I just > don't know how to set that up) so I have to go out of my way to log on and > then hunt for what I want in Team Kitfox. Unfortunately that translates to > out of sight, out of mind for me which is a darn shame. I get a sense that > this observation resonates with quite a few others. > > Taking the next logical step, Debra, John and the the Kitfox brand are > missing out because of this. A robust owner/builder forum that grabs your > attention thru e-mails sent directly to us, that we can't miss, builds > enthusiasm, promotes interest in the brand, and is not just good for the > brand but probably essential. I suspect that many who might have some > interest in a Kitfox would be regular readers if e-mail posts were > automatic and that would be good for marketing. > > I stopped by the Just factory primarily to look it over, compare their > Highlander to the Kitfox model 7 and was surprised that Troy mentioned > they have been sending 8 to 10 planes out the door per month, all Super > STOLs and probably at least in part due to all of the attention in the > aviation press on their Super STOL model. Positive attention sells planes > and grabs market share. > > Kitfox is such a great and fun plane I would love to see it really > blossom. I say this having owned over a dozen piston planes, flown lord > knows how many more and really love my Kitfox. > > BJ model IV 1050 Rotax 80 > > > . > > >> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >> >> You been hittin' that New Years eve liquid a bit early there, Mike? >> >> Lynn >> >> >> On Dec 26, 2014, at 10:33 PM, Michael Gibbs wrote: >> >>> --> Kitfox-List message posted by: Michael Gibbs >>> <michaelgibbs@cox.net> >>> >>> Isn't Arizona closer to the middle? :-) >>> >>> Mike G. >>> Kitfox IV-1200 Speedster, Series 6 >>> Phoenix, AZ >>> >>>> On Dec 26, 2014, at 3:14 PM, Lynn Matteson<lynnmatt@jps.net> wrote: >>>> >>>> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >>>> >>>> I hear you, Lowell....how about makin' it somewhere centrally >>>> located....like Michigan, for example. : ) >>>> >>>> Lynn Matteson >>>> Kitfox IV Speedster, taildragger >>>> JabiLynn 2200, #2062 >>>> Prince prop 64 x 30, P-tip >>>> Electroair direct-fire ignition system >>>> Rotec TBI-40 injection (sleeved to 36mm) >>>> Status: flying with 1601 hrs... (since 3-27-2006) >>>> >>>> >>>> >>>> >>>> >>>> >>>>> On Dec 25, 2014, at 1:48 PM, lcfitt@sbcglobal.net wrote: >>>>> >>>>> Merry Christmas! >>>>> Without a doubt a post from Matronics will lift my spirits - any >>>>> post. I sure hope this doesn't sound like the ravings of an old >>>>> man, but I do sincerely cherish the "good old days". I feel I >>>>> have a wealth of friends - most I have never met - but friends >>>>> never the less. I guess my fantasy would be a Matronics Kitfox >>>>> Fly- in, Reunion or what ever, just because. >>>>> Lowell >>>>> >>>>> Sent via DroidX2 on Verizon Wireless >>>>> >>>>> >>>>> -----Original message----- >>>>> From: Guy Buchanan<gebuchanan@cox.net> >>>>> To: "kitfox-list@matronics.com"<kitfox-list@matronics.com> >>>>> Sent: Thu, Dec 25, 2014 15:17:31 GMT+00:00 >>>>> Subject: Kitfox-List: Merry Christmas >>>>> >>>>> Merry Christmas to the few of you left on the list! >>>>> >>>>> Guy Buchanan >>>>> List Moderator >>>>> >>>>> Sent from my iPod >>>>> >>>>>> On Dec 25, 2014, at 6:57 AM, Patrick Reilly >>>>>> <patreilly43@gmail.com> wrote: >>>>>> >>>>>> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I >>>>>> tried a couple of days ago to get into the site, After trying to >>>>>> get into the site for 15 minutes answering every question about >>>>>> me, except my mother's hat size, I gave up. That site is about >>>>>> as convoluted as the IRS tax filing system. >>>>>> Marco replied to my search for a clutch. He said he'd sell me >>>>>> his for $18K and throw in the plane for free. That was the only >>>>>> response I had. >>>>>> A post showed up 2 days ago from a Kitfoxer that went to Boise >>>>>> ID to fly at the Stick& Rudder Kitfox school. That same day the >>>>>> Kit Plane mag showed up with an article about that school. I >>>>>> told my wife my were going to Boise ID for vacation. >>>>>> >>>>>> Pat Reilly >>>>>> Mod 3 583 Rebuilt >>>>>> Rockford, IL >>>>>> >>>>>> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson >>>>>> <lynnmatt@jps.net> wrote: >>>>>> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >>>>>> >>>>>> Hi Pat- >>>>>> This is the first email that I've received from the Matronics >>>>>> Kitfox list in ages, but it is still working as far as it >>>>>> goes....just VERY low in frequency of posts. Everyone has gone >>>>>> over to TeamKitfox, I guess. >>>>>> >>>>>> Lynn Matteson >>>>>> Kitfox IV Speedster, taildragger >>>>>> Jabiru 2200, #2062 >>>>>> Prince prop 64 x 30, P-tip >>>>>> Electroair direct-fire ignition system >>>>>> Rotec TBI-40 injection (sleeved to 36mm) >>>>>> Status: flying with 1599 hrs... (since 3-27-2006) >>>>>> >>>>>> >>>>>> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote: >>>>>> >>>>>> Marco, Thanks for the offer. But, not exactly what I had in >>>>>> mind. I didn't get a posting to my email through Matronics. just >>>>>> a notice that a reply was made to the topic. I had to key into >>>>>> Matronics. I wonder if something has changed. I haven't seen any >>>>>> Kitfox Matronics postings directly to me as in the past? >>>>>> >>>>>> -- >>>>>> Pat Reilly >>>>>> Mod 3 582 Rebuild >>>>>> Rockford,IL >>>>>> ================================== >>>>>> >>>>>> >>>>>> =================================== >>>>>> br> fts!) >>>>>> r> > eroelectric.com" target="_blank">www.aeroelectric.com >>>>>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>>>>> p.com" target="_blank">www.homebuilthelp.com >>>>>> e.com" target="_blank">www.mypilotstore.com >>>>>> " target="_blank">www.mrrace.com >>>>>> target="_blank">http://www.matronics.com/contribution >>>>>> -Matt Dralle, List Admin. >>>>>> =================================== >>>>>> ox-List" target="_blank">http://www.matronics.com/Navigator? >>>>>> Kitfox-List >>>>>> =================================== >>>>>> FORUMS - >>>>>> _blank">http://forums.matronics.com >>>>>> =================================== >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Pat Reilly >>>>>> Mod 3 582 Rebuild >>>>>> Rockford,IL >>>>>> D===================== >>>>>> ====================== >>>>>> 3D >>>>>> ot;">www.aeroelectric.combooks.com"">www.buildersbooks.comquot;">ww >>>>>> w.homebuilthelp.comquot;">www.mypilotstore.com">www.mrrace.comot;"> >>>>>> http://www.matronics.com/ >>>>>> contributionD================= >>>>>> ====================== >>>>>> 3D==== x-List"">http://www.matronics.com/Navigator? >>>>>> Kitfox- >>>>>> ListD=====================3 >>>>>> D===================== >>>>>> == // >>>>>> forums.matronics.comD=============== >>>>>> 3D======================3 >>>>>> D====== >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >> >> >> >> > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:50:46 AM PST US
    From: "Lowell Fitt" <lcfitt3@gmail.com>
    Subject: Re: Bj"s Email
    Jared's post pretty much summarizes my feelings on the differences between the forum and the list. On Matronics it was always real people with real names and real locations. After all Kitfox owners and fliers are like a band of brothers. It is a great airplane and frankly some of the best friends I have developed over a lifetime of doing things has been triggered by this little airplane. It has always amazed me how many of the Forum guys go to great lengths to avoid revealing who they really are and where they are from. For me it doesn't make for a warm and fuzzy. Yet, I have contributed on the Forum where I felt I had something to say. But, I can honestly say the enthusiasm is waning somewhat. I don't know if it is because of the anonymity which in some sense suggests something sinister or that most active builders are involved in the "heavies" or if it is the guys whose profile status is given as 'Considering" who post as "experts" and whose posts make me wonder if they have ever seen a real live Kitfox - of any vintage. I remember when Matronics introduced the "Forum" option. I felt at the time it would not help the email list. I have never flown behind a 582, but as has been mentioned, I read every post. I became not only comfortable with the two stroke 582, but somewhat knowledgeable about their operation. I learned a lot about different options guys have on their airplanes. I had joined the Matronics precursor after seeing some printouts of some conversations on the original Kitfox email list while at one of the factory fly-ins. This was in 1994. I remember Paul S. who was the source of virtually all of Lynn's float mounting information he found on the Forum. Paul has a history on this list or its precursor. I mention this only because there is a world of knowledge behind the names who have posted on this Merry Christmas thread and the many more who are lurking. I guess that might be the problem. Not many builders needing help with questions. Just a lot of guys who have been there and dont that. I would like to thank those who have posted. It does bring back many great memories and I would hope we could do something someday. Lowell -------------------------------------------------- From: "jareds" <jareds@verizon.net> Sent: Sunday, December 28, 2014 7:25 AM Subject: Kitfox-List: Bj"s Email > > Greetings, > I'm still on the list occasionally. Just replaced engine and hope to get > it up and running more likely in spring as we keep getting snow in South > Dakota! > BJ really summed up the sentiments of this list. I couldnt have gotten my > plane running nor kept it going without the reassurance of all my fixes > and improvements from this list!! Everyone is so gracious offering even a > home phone number in most cases to "talk over" a piece of advice!! > > Safe Flying everyone!! > > Jared Schott > 67YF > > On 12/27/2014 6:39 PM, bjones@dmv.com wrote: >> --> Kitfox-List message posted by: bjones@dmv.com >> >> Guys, >> >> I have enjoyed and learned from the Matronics Kitfox list serve over the >> years, recognizing lots of names and appreciating your insights. >> >> If I get an e-mail from the Matronics Kitfox list serve I read it. Love >> too by the way. Even if the subject does not seem of interest to me at >> the >> moment. The experience and knowledge in the Kitfox builder/owner >> community >> is really important to keep on the front burner and thriving for everyone >> who owns or who probably should have the brand clearly on their radar >> screen. >> >> E-mails from Team Kitfox don't just appear in my IN BOX, (maybe I just >> don't know how to set that up) so I have to go out of my way to log on >> and >> then hunt for what I want in Team Kitfox. Unfortunately that translates >> to >> out of sight, out of mind for me which is a darn shame. I get a sense >> that >> this observation resonates with quite a few others. >> >> Taking the next logical step, Debra, John and the the Kitfox brand are >> missing out because of this. A robust owner/builder forum that grabs your >> attention thru e-mails sent directly to us, that we can't miss, builds >> enthusiasm, promotes interest in the brand, and is not just good for the >> brand but probably essential. I suspect that many who might have some >> interest in a Kitfox would be regular readers if e-mail posts were >> automatic and that would be good for marketing. >> >> I stopped by the Just factory primarily to look it over, compare their >> Highlander to the Kitfox model 7 and was surprised that Troy mentioned >> they have been sending 8 to 10 planes out the door per month, all Super >> STOLs and probably at least in part due to all of the attention in the >> aviation press on their Super STOL model. Positive attention sells planes >> and grabs market share. >> >> Kitfox is such a great and fun plane I would love to see it really >> blossom. I say this having owned over a dozen piston planes, flown lord >> knows how many more and really love my Kitfox. >> >> BJ model IV 1050 Rotax 80 >> >> >> >> >> >> >> >> >> >> >> >> . >> >> >> >>> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >>> >>> You been hittin' that New Years eve liquid a bit early there, Mike? >>> >>> Lynn >>> >>> >>> On Dec 26, 2014, at 10:33 PM, Michael Gibbs wrote: >>> >>>> --> Kitfox-List message posted by: Michael Gibbs >>>> <michaelgibbs@cox.net> >>>> >>>> Isn't Arizona closer to the middle? :-) >>>> >>>> Mike G. >>>> Kitfox IV-1200 Speedster, Series 6 >>>> Phoenix, AZ >>>> >>>>> On Dec 26, 2014, at 3:14 PM, Lynn Matteson<lynnmatt@jps.net> wrote: >>>>> >>>>> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >>>>> >>>>> I hear you, Lowell....how about makin' it somewhere centrally >>>>> located....like Michigan, for example. : ) >>>>> >>>>> Lynn Matteson >>>>> Kitfox IV Speedster, taildragger >>>>> JabiLynn 2200, #2062 >>>>> Prince prop 64 x 30, P-tip >>>>> Electroair direct-fire ignition system >>>>> Rotec TBI-40 injection (sleeved to 36mm) >>>>> Status: flying with 1601 hrs... (since 3-27-2006) >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> On Dec 25, 2014, at 1:48 PM, lcfitt@sbcglobal.net wrote: >>>>>> >>>>>> Merry Christmas! >>>>>> Without a doubt a post from Matronics will lift my spirits - any >>>>>> post. I sure hope this doesn't sound like the ravings of an old >>>>>> man, but I do sincerely cherish the "good old days". I feel I >>>>>> have a wealth of friends - most I have never met - but friends >>>>>> never the less. I guess my fantasy would be a Matronics Kitfox >>>>>> Fly- in, Reunion or what ever, just because. >>>>>> Lowell >>>>>> >>>>>> Sent via DroidX2 on Verizon Wireless >>>>>> >>>>>> >>>>>> -----Original message----- >>>>>> From: Guy Buchanan<gebuchanan@cox.net> >>>>>> To: "kitfox-list@matronics.com"<kitfox-list@matronics.com> >>>>>> Sent: Thu, Dec 25, 2014 15:17:31 GMT+00:00 >>>>>> Subject: Kitfox-List: Merry Christmas >>>>>> >>>>>> Merry Christmas to the few of you left on the list! >>>>>> >>>>>> Guy Buchanan >>>>>> List Moderator >>>>>> >>>>>> Sent from my iPod >>>>>> >>>>>>> On Dec 25, 2014, at 6:57 AM, Patrick Reilly >>>>>>> <patreilly43@gmail.com> wrote: >>>>>>> >>>>>>> Lynn, Great to hear from you. I was on Team Kitfox a year ago. I >>>>>>> tried a couple of days ago to get into the site, After trying to >>>>>>> get into the site for 15 minutes answering every question about >>>>>>> me, except my mother's hat size, I gave up. That site is about >>>>>>> as convoluted as the IRS tax filing system. >>>>>>> Marco replied to my search for a clutch. He said he'd sell me >>>>>>> his for $18K and throw in the plane for free. That was the only >>>>>>> response I had. >>>>>>> A post showed up 2 days ago from a Kitfoxer that went to Boise >>>>>>> ID to fly at the Stick& Rudder Kitfox school. That same day the >>>>>>> Kit Plane mag showed up with an article about that school. I >>>>>>> told my wife my were going to Boise ID for vacation. >>>>>>> >>>>>>> Pat Reilly >>>>>>> Mod 3 583 Rebuilt >>>>>>> Rockford, IL >>>>>>> >>>>>>> On Fri, Dec 12, 2014 at 9:39 AM, Lynn Matteson >>>>>>> <lynnmatt@jps.net> wrote: >>>>>>> --> Kitfox-List message posted by: Lynn Matteson<lynnmatt@jps.net> >>>>>>> >>>>>>> Hi Pat- >>>>>>> This is the first email that I've received from the Matronics >>>>>>> Kitfox list in ages, but it is still working as far as it >>>>>>> goes....just VERY low in frequency of posts. Everyone has gone >>>>>>> over to TeamKitfox, I guess. >>>>>>> >>>>>>> Lynn Matteson >>>>>>> Kitfox IV Speedster, taildragger >>>>>>> Jabiru 2200, #2062 >>>>>>> Prince prop 64 x 30, P-tip >>>>>>> Electroair direct-fire ignition system >>>>>>> Rotec TBI-40 injection (sleeved to 36mm) >>>>>>> Status: flying with 1599 hrs... (since 3-27-2006) >>>>>>> >>>>>>> >>>>>>> On Dec 10, 2014, at 6:47 PM, Patrick Reilly wrote: >>>>>>> >>>>>>> Marco, Thanks for the offer. But, not exactly what I had in >>>>>>> mind. I didn't get a posting to my email through Matronics. just >>>>>>> a notice that a reply was made to the topic. I had to key into >>>>>>> Matronics. I wonder if something has changed. I haven't seen any >>>>>>> Kitfox Matronics postings directly to me as in the past? >>>>>>> >>>>>>> -- >>>>>>> Pat Reilly >>>>>>> Mod 3 582 Rebuild >>>>>>> Rockford,IL >>>>>>> ================================== >>>>>>> >>>>>>> >>>>>>> =================================== >>>>>>> br> fts!) >>>>>>> r> > eroelectric.com" target="_blank">www.aeroelectric.com >>>>>>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>>>>>> p.com" target="_blank">www.homebuilthelp.com >>>>>>> e.com" target="_blank">www.mypilotstore.com >>>>>>> " target="_blank">www.mrrace.com >>>>>>> target="_blank">http://www.matronics.com/contribution >>>>>>> -Matt Dralle, List Admin. >>>>>>> =================================== >>>>>>> ox-List" target="_blank">http://www.matronics.com/Navigator? >>>>>>> Kitfox-List >>>>>>> =================================== >>>>>>> FORUMS - >>>>>>> _blank">http://forums.matronics.com >>>>>>> =================================== >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Pat Reilly >>>>>>> Mod 3 582 Rebuild >>>>>>> Rockford,IL >>>>>>> D===================== >>>>>>> ====================== >>>>>>> 3D >>>>>>> ot;">www.aeroelectric.combooks.com"">www.buildersbooks.comquot;">ww >>>>>>> w.homebuilthelp.comquot;">www.mypilotstore.com">www.mrrace.comot;"> >>>>>>> http://www.matronics.com/ >>>>>>> contributionD================= >>>>>>> ====================== >>>>>>> 3D==== x-List"">http://www.matronics.com/Navigator? >>>>>>> Kitfox- >>>>>>> ListD=====================3 >>>>>>> D===================== >>>>>>> == // >>>>>>> forums.matronics.comD=============== >>>>>>> 3D======================3 >>>>>>> D====== >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> > > >




    Other Matronics Email List Services

  • Post A New Message
  •   kitfox-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kitfox-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kitfox-list
  • Browse Kitfox-List Digests
  •   http://www.matronics.com/digest/kitfox-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --