---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Fri 02/05/16: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:09 PM - 582 to 912 (jareds) 2. 04:43 PM - Re: 582 to 912 (Guy Buchanan) 3. 06:48 PM - Re: 582 to 912 (Roger McConnell) ________________________________ Message 1 _____________________________________ Time: 04:09:09 PM PST US From: jareds Subject: Kitfox-List: 582 to 912 I've got a lead on a 912 but need a prop / oil cooler/ (i think my big 582 radiator will work / engine mount. Any idea how much for these items or does anyone have them? This is new to me. I have an EIS that i think would hook up to the 912 for monitoring vitals. Is there anything else i would need. Will my cowlings all still work? Gonna sell the firewall forward from kitfox model 4 582 grey zero time other than i did break in. Carbs rebuilt when engine purchased. c gearbox 3 blade wharp drive adjustable From ROTAX-RECREATIONAL-ENGINES-LLC Is it ok to post it for sale on kitlist? Not sure on the rules these days? Thanks Jared ________________________________ Message 2 _____________________________________ Time: 04:43:25 PM PST US Subject: Re: Kitfox-List: 582 to 912 From: Guy Buchanan Hey I just did this! Much fun. You'll certainly be happier with the 912 under heavy / hot / high conditions. Some of what I did: * Prop depends mostly on your budget. The only difference is weight and looks. They all perform the same. I used a Warp 3-blade 70". * My oil cooler is an Earl's 21608AERL off Amazon. You can go smaller if you want. (Mine's 5" high. I think you can go 3", depending on location. I'm in the US desert southwest.) * 582 radiator will work. * Engine mount is made yourself or buy from Kitfox Aircraft. If you buy from Kitfox Aircraft you'll have slight clearance problem between the starter and the firewall right foot well. I made a stainless blister to clear it. Some make their own motor mounts, moving the engine forward a little to make the install easier. I wanted my engine as far back as possible so the Kitfox LLC mount was fine. * I had the old GRT EIS. I sent it in to Grand Rapids and they "refurbished" it to a model 2000 for $149 in March 2011. I had to buy some more sensors too. * I extended my forward cowl (radial type) 2" so it would be right behind the spinner. You don't have to. I had an oil door on the top cowl that I moved as well. * What else you need depends a lot on what you get with the engine. You may need: o Oil tank (Rotax) o Voltage regulator (Rotax) o Exhaust system (Kitfox LLC) o All the crap to put it together. Sorry, I don't have prices for any of this stuff readily available and they'd all be ancient history anyway. Feel free to post "for sale" on this site, but you'll get more interest on Barnstormers. Inquire on Team Kitfox for parts and accessories, as well as here. Some pictures of my install before and after here: https://b-and-n.smugmug.com/Flying/Kitfox/ Good luck! Guy Buchanan - List moderator Ramona, CA Kitfox IV-1200 / 912-S / Warp 3cs / 500 hrs. flying again Now a glider pilot, too. On 2/5/2016 4:07 PM, jareds wrote: > > I've got a lead on a 912 but need a prop / oil cooler/ (i think my big > 582 radiator will work / engine mount. > Any idea how much for these items or does anyone have them? > > This is new to me. I have an EIS that i think would hook up to the > 912 for monitoring vitals. > Is there anything else i would need. Will my cowlings all still work? > > Gonna sell the firewall forward from kitfox model 4 > 582 grey zero time other than i did break in. > Carbs rebuilt when engine purchased. > c gearbox > 3 blade wharp drive adjustable > > From ROTAX-RECREATIONAL-ENGINES-LLC > Is it ok to post it for sale on kitlist? Not sure on the rules these > days? > > Thanks > > Jared > > ________________________________ Message 3 _____________________________________ Time: 06:48:49 PM PST US Subject: Re: Kitfox-List: 582 to 912 From: Roger McConnell I have a GSC ground adjustable three blade for sale. If your interested. Sent from my iPad > On Feb 5, 2016, at 6:07 PM, jareds wrote: > > > I've got a lead on a 912 but need a prop / oil cooler/ (i think my big 582 radiator will work / engine mount. > Any idea how much for these items or does anyone have them? > > This is new to me. I have an EIS that i think would hook up to the 912 for monitoring vitals. > Is there anything else i would need. Will my cowlings all still work? > > Gonna sell the firewall forward from kitfox model 4 > 582 grey zero time other than i did break in. > Carbs rebuilt when engine purchased. > c gearbox > 3 blade wharp drive adjustable > > From ROTAX-RECREATIONAL-ENGINES-LLC > Is it ok to post it for sale on kitlist? Not sure on the rules these days? > > Thanks > > Jared > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.