---------------------------------------------------------- Kitfox-List Digest Archive --- Total Messages Posted Thu 05/19/16: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:53 PM - Re: Rotax 912 UL Radiator Cap (Guy Buchanan) ________________________________ Message 1 _____________________________________ Time: 04:53:01 PM PST US Subject: Kitfox-List: Re: Rotax 912 UL Radiator Cap From: Guy Buchanan OK. Today I confirmed that BMW 17112345074 radiator cap works with the 912s. Guy Buchanan Ramona, CA Kitfox IV-1200 / 912-S / Warp 3cs / 600 hrs Glider pilot, too On 3/20/2016 9:16 AM, Guy Buchanan wrote: > No. I never had a reason to do the replacement, but I'll give it a try > this week to see if it works. It certainly looks identical, so I have > little doubt that it does, but I'll give it a run next weekend to make > sure and I'll get back to you. > > Guy > > On 3/19/2016 1:31 PM, Hugh McKay wrote: >> Guy, >> Did you ever replace the radiator cap on your 912-S with the BMW cap >> you bought? If so, did it fit? >> Hugh G. McKay III, P.E. Fellow, L.M. ASCE >> Senior Consultant >> Worldwide Engineering Inc. >> 4090 North NC Hwy. 16 >> Denver, NC 28037 >> >> Ph. 704-661-8271 >> Fax 704-483-5466 >> email hgmckay@bellsouth.net >> http://www.wwegeo.com >> *From:* Guy Buchanan >> *Sent:* Sunday, October 18, 2015 2:49 PM >> *To:* Hugh McKay >> *Subject:* Re: Rotax 912 UL Radiator Cap >> Well I'm not going to tell you that it's the same part, but I >> purchased one and it looks and feels identical. And I have to tell >> you I haven't used it yet. And yes, I'm replacing the cap on an S. I >> don't know if the 80 uses the same part. >> >> Guy Buchanan >> Ramona, CA >> Kitfox IV-1200 / 912-S / Warp 3cs / 500 hrs. flying again. >> Now a glider pilot, too. >> >> >> >> On 10/17/2015 4:43 AM, Hugh McKay wrote: >>> Guy, >>> >>> Did I understand correctly from your 8/9/15 email on the Rotax >>> Matronics forum that the BMW Radiator Cap part # 17112345074 will >>> also replace the 1.2 bar cap for a 912 UL? I notice your Kitfox >>> engine was a 912 S. The engine on my Allegro 2000 is a 912 UL. >>> >>> Hugh G. McKay III, P.E. Fellow, L.M. ASCE >>> Senior Consultant >>> Worldwide Engineering Inc. >>> 4090 North NC Hwy. 16 >>> Denver, NC 28037 >>> >>> Ph. 704-661-8271 >>> Fax 704-483-5466 >>> email hgmckay@bellsouth.net >>> http://www.wwegeo.com >> > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kitfox-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kitfox-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kitfox-list Browse Digests http://www.matronics.com/digest/kitfox-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.