---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 12/26/02: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:39 AM - Re: Season's Greeting (Airgriff2@aol.com) 2. 06:02 AM - FSII Full Enclosure (Ronrdlw@aol.com) 3. 10:06 AM - Rotax 503 (EnaudZ@aol.com) 4. 11:09 AM - Re: Rotax 503 (Richard Pike) 5. 11:39 AM - Re: Rotax 503 (Gary robert voigt) 6. 05:44 PM - Covering the Cage (Ronrdlw@aol.com) 7. 06:18 PM - EBAY!!! LAZER & MARK11 (Gary robert voigt) 8. 06:20 PM - Re: Covering the Cage (Bob Bean) 9. 07:31 PM - Re: FSII Full Enclosure (woody) 10. 08:35 PM - kit bill of sale () 11. 08:48 PM - Re: EBAY!!! LAZER & MARK11 (John Williamson) 12. 09:29 PM - Re: kit bill of sale (possums) 13. 09:42 PM - [ Paul Petty ] : New Email List Photo Share Available! (Email List Photo Shares) ________________________________ Message 1 _____________________________________ Time: 04:39:23 AM PST US From: Airgriff2@aol.com Subject: Re: Kolb-List: Season's Greeting --> Kolb-List message posted by: Airgriff2@aol.com Skis--Skis--Where are the skis ??? Albany, NY. 19.2" of snow Christmas day. OH yea, it was a white Christmas !!! Bob Griffin ________________________________ Message 2 _____________________________________ Time: 06:02:57 AM PST US From: Ronrdlw@aol.com Subject: Kolb-List: FSII Full Enclosure --> Kolb-List message posted by: Ronrdlw@aol.com Hello FS owners, did anyone design and build their own canopy or is the kolb design good enough and worth the money. Thanks Ron ________________________________ Message 3 _____________________________________ Time: 10:06:09 AM PST US From: EnaudZ@aol.com Subject: Kolb-List: Rotax 503 --> Kolb-List message posted by: EnaudZ@aol.com Hello all Removed carbs turn crank to TDC can see vertical scrtch marks on cyl. wall . cause for alarm????? FS2 ________________________________ Message 4 _____________________________________ Time: 11:09:03 AM PST US From: Richard Pike Subject: Re: Kolb-List: Rotax 503 --> Kolb-List message posted by: Richard Pike How deep? How many? Which wall (s)? Any idea how caused? (Where are the circlips? Where they belong?) One cylinder or both? How about the piston (s)? Rings? Coloration? Heat apparent? (The devil is in the details) Richard Pike MKIII N420P (420ldPoops) At 01:04 PM 12/26/02 -0500, you wrote: >--> Kolb-List message posted by: EnaudZ@aol.com > > Hello all > Removed carbs turn crank to TDC can see >vertical scrtch marks on cyl. wall . > cause for alarm????? > FS2 > > ________________________________ Message 5 _____________________________________ Time: 11:39:04 AM PST US From: "Gary robert voigt" Subject: Re: Kolb-List: Rotax 503 --> Kolb-List message posted by: "Gary robert voigt" Hello, i have have got some also.....about 7 or 8 on each cylinder, looks like about .0005" to .0015" deep...hard to tell. all i know is i either let a few pieces of aluminum shavings fall when i was installing and drilling for my muffler brackets or i did this on a cold seizure in the winter by not letting it warm up enough. i have been flying like this and have not had any problems but i do monitor closely. i will probably have this honed out at the time when i overhaul. EnaudZ@aol.com wrote: > --> Kolb-List message posted by: EnaudZ@aol.com > > Hello all > Removed carbs turn crank to TDC can see > vertical scrtch marks on cyl. wall . > cause for alarm????? > FS2 > ________________________________ Message 6 _____________________________________ Time: 05:44:13 PM PST US From: Ronrdlw@aol.com Subject: Kolb-List: Covering the Cage --> Kolb-List message posted by: Ronrdlw@aol.com Hello fellow builders, is it crucial to remove the tail boom to wrap the covering around the part of the cage where the tail boom fits into the cage ? Or can that part be glued with the tail still attached? Thanks Ron ________________________________ Message 7 _____________________________________ Time: 06:18:50 PM PST US From: "Gary robert voigt" Subject: Kolb-List: EBAY!!! LAZER & MARK11 --> Kolb-List message posted by: "Gary robert voigt" Hello fellow flyers...this might be a good deal for somebody who wants a kolb lazer (3 kits) and also a kolb mark11 on ebay!!! check it out. thanks, Gary r. voigt http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=26428&item=1875621589 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=26428&item=1875443786 ________________________________ Message 8 _____________________________________ Time: 06:20:27 PM PST US From: Bob Bean Subject: Re: Kolb-List: Covering the Cage --> Kolb-List message posted by: Bob Bean Ron, if the Royal Emperor of the kingdom said we had to remove the tail, I doubt that I would. Aside from all the work involved, your chances of boogering something up in reassembly would be great. -BB, dormant MkIII in the frozen wasteland. do not archive Ronrdlw@aol.com wrote: >--> Kolb-List message posted by: Ronrdlw@aol.com > >Hello fellow builders, is it crucial to remove the tail boom to wrap the >covering around the part of the cage where the tail boom fits into the cage ? >Or can that part be glued with the tail still attached? > Thanks > Ron > > > > ________________________________ Message 9 _____________________________________ Time: 07:31:09 PM PST US From: woody Subject: Re: Kolb-List: FSII Full Enclosure --> Kolb-List message posted by: woody At 09:01 AM 12/26/02 -0500, you wrote: >--> Kolb-List message posted by: Ronrdlw@aol.com > >Hello FS owners, did anyone design and build their own canopy or is the kolb >design good enough and worth the money. > >Thanks >Ron Check my pod in the photoshare archives (T Bird). It took time and a bit of money but I like it. ________________________________ Message 10 ____________________________________ Time: 08:35:34 PM PST US From: Subject: Kolb-List: kit bill of sale --> Kolb-List message posted by: Kolbers, I have hit a speedbump on the highway to registering my Mk-3. My kit was originally bought in 92 by a fellow who was unable to complete it. I bought it at nearly the point of a quik-build kit in 97 and have since nearly completed it." I know that its been a long time, but I have a young family." The FAA now tells me I need to submit the original bill of sale from Kolb to Gerry Heffner the original owner, and also that my handwritten note from Gerry describing the sale to me in 97 is not a sufficient paper trail. They were kind enough to supply me with two Bill of Sale forms (AC 8050-2) to complete the required paper trail, but I have not been able to locate Mr Heffner as he has since moved, and how can Kolb help me now that they have changed hands? How was that for a run on sentence? I have Gerrys original invoices from each of the subkits, powder coating, and Matco brakes, but the Feds say these are of no use. Any suggestions on how to get this mess fixed fast, or does anyone know Gerry Heffner from Hazleton PA and can tell me where to find him? Denny Rowe Mk-3 N616DR Leechburg,PA ________________________________ Message 11 ____________________________________ Time: 08:48:28 PM PST US From: "John Williamson" Subject: Re: Kolb-List: EBAY!!! LAZER & MARK11 --> Kolb-List message posted by: "John Williamson" Both of these items have been for sale on Barnstormers.com for a while. John Williamson Arlington, TX N49KK, Kolb Kolbra, Jabiru 2200, 163 hours http://home.attbi.com/~kolbrapilot/ DO NOT ARCHIVE ________________________________ Message 12 ____________________________________ Time: 09:29:16 PM PST US From: possums Subject: Re: Kolb-List: kit bill of sale --> Kolb-List message posted by: possums At 11:43 PM 12/26/2002 -0500, you wrote: >--> Kolb-List message posted by: > >Kolbers, >I have hit a speedbump on the highway to registering my Mk-3. >My kit was originally bought in 92 by a fellow who was unable to complete it. >I bought it at nearly the point of a quik-build kit in 97 and have since >nearly completed it." I know that its been a long time, but I have a young >family." >The FAA now tells me I need to submit the original bill of sale from Kolb >to Gerry Heffner the original owner, and also that my handwritten note >from Gerry describing the sale to me in 97 is not a sufficient paper >trail. They were kind enough to supply me with two Bill of Sale forms (AC >8050-2) to complete the required paper trail, but I have not been able to >locate Mr Heffner as he has since moved, and how can Kolb help me now that >they have changed hands? How was that for a run on sentence? >I have Gerrys original invoices from each of the subkits, powder coating, >and Matco brakes, but the Feds say these are of no use. >Any suggestions on how to get this mess fixed fast, or does anyone know >Gerry Heffner from Hazleton PA and can tell me where to find him? >Denny Rowe >Mk-3 N616DR >Leechburg,PA You might try these Gerry Heffner 1 South Church St. Hazleton, PA 18201 717-455-1508 CAN DO Inc The building is located two-tenths of a mile from Route 309, four miles from Interstate 81 and 11 mi. from Hazleton Airport. "This building shows better than anything in the county," said Gerry Heffner, SEDCO vice president. ________________________________ Message 13 ____________________________________ Time: 09:42:19 PM PST US Subject: Kolb-List: [ Paul Petty ] : New Email List Photo Share Available! From: Email List Photo Shares --> Kolb-List message posted by: Email List Photo Shares A new Email List Photo Share is available: Poster: Paul Petty Subject: Honda power plant http://www.matronics.com/photoshare/ppetty@c-gate.net.12.26.2002/index.html -------------------------------------------- o EMAIL LIST PHOTO SHARE Share your files and photos with other List members simply by emailing the files to: pictures@matronics.com Please view the typical Share above and include the Description Text Fields as shown along with your submission of files and photos. o Main Photo Share Index: http://www.matronics.com/photoshare --------------------------------------------