---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sun 10/05/03: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:24 AM - Dead Puppys - I lik'em (Mike Pierzina) 2. 04:38 AM - electric trim (Ted Cowan) 3. 05:13 AM - ultrastar (ron wehba) 4. 07:39 AM - plans Question (ron wehba) 5. 09:04 AM - copper state (Erich_Weaver@URSCorp.com) 6. 01:10 PM - Re: Dead Puppys - I lik'em (jerb) 7. 01:14 PM - Re: electric trim (jerb) 8. 03:17 PM - Website Update (John Williamson) 9. 05:30 PM - Re: ultrastar (Richard Swiderski) 10. 06:12 PM - Re: ultrastar (ron wehba) 11. 08:29 PM - Venice Beach Fl ... (BMWBikeCrz@aol.com) 12. 10:57 PM - Venice Beach Fl ... (BMWBikeCrz@aol.com) ________________________________ Message 1 _____________________________________ Time: 12:24:18 AM PST US From: "Mike Pierzina" Subject: Kolb-List: Dead Puppys - I lik'em --> Kolb-List message posted by: "Mike Pierzina" Hay Guys, Stickin wit some tradition , the "subject" has nuthin 2 do wit da question. Eye m wonder in F any body wood tell me there pitch on an IVO. Eye m redi 2 break in my 503. I set it 2 13degrees , I'm hoping 2 B close enough 4 da 1 our it takes wit out shuting down 2 re-adjust da pitch....I can fine tune it afterwoods. 503 / 2:58 , 3blade IVO 66" Tank U ________________________________ Message 2 _____________________________________ Time: 04:38:10 AM PST US From: Ted Cowan Subject: Kolb-List: electric trim --> Kolb-List message posted by: Ted Cowan Hello all. Had a great time at the Kolb flyin. Am just (hopefully) completing my wiring of the instruments and guages. Am having difficulty with grasping the wiring set up for the electric trim. This employs the use of the motor from a battery powered (3volt) electric screw driver, black and decker. there are also two micro switches to prevent overrun at both ends of the spectrim. does anyone happen to have any idea as to how to wire this up to a rocker type switch or a two way toggle switch? appreciate the imput. I think it was designed by someone on the list at one point but I cannot find the reference in the archives. thanks. ted cowan. p.s. I have the original rocker from the screwdriver which I can use if I can figure (I am really dumb) out how to work the micros shut off switches. ________________________________ Message 3 _____________________________________ Time: 05:13:40 AM PST US From: "ron wehba" Subject: Kolb-List: ultrastar --> Kolb-List message posted by: "ron wehba" who owns the blue/yellow Ustar with the long gear legs,I think it is in florida.thanks ron.w.
who owns the blue/yellow Ustar with the long gear legs,I think it is in florida.thanks ron.w.
________________________________ Message 4 _____________________________________ Time: 07:39:34 AM PST US From: "ron wehba" Subject: Kolb-List: plans Question --> Kolb-List message posted by: "ron wehba" sitting here looking at my U star plans anyone know what the concrete block drawing is on page 11?,,thinking it may be an idea for jigging up to build the cage? p.s. plans are very old.was gonna fly mine this morning,,but it is actually raining out here in west tx.
sitting here looking at my U star plans anyone know what the concrete block drawing is on page 11?,,thinking it may be an idea for jigging up to build the cage? p.s. plans are very old.was gonna fly mine this morning,,but it is actually raining out here in west tx.
________________________________ Message 5 _____________________________________ Time: 09:04:31 AM PST US Subject: Kolb-List: copper state From: Erich_Weaver@URSCorp.com 10/05/2003 12":00:53.PM@matronics.com, MIME-CD complete at 10/05/2003 12:00:53.PM@matronics.com, Serialize by Router on SMTP102/URSCorp(Release 5.0.11 |July 24, 2002) at 10/05/2003 12:03:49.PM@matronics.com PRIORITY_NO_NAME --> Kolb-List message posted by: Erich_Weaver@URSCorp.com Hey gang I will be driving out from Santa Barbara to attend Copper State on Friday and Saturday. No quite enough testosterone here to do the solo cross country flight. Looks like a few of us from the Monument Valley trip will be there - hope to see those familiar kolb faces and maybe meet a few new ones. regards, Erich Weaver ________________________________ Message 6 _____________________________________ Time: 01:10:19 PM PST US From: jerb Subject: Re: Kolb-List: Dead Puppys - I lik'em --> Kolb-List message posted by: jerb Don't have da pitch, but don't be surprised if you have to add more pitch to the prop during the break in run as the engine gains power as it breaks in. Had to do it on two different 447's when breaking them in. Warm up the engine a little before going to any full high power runs while completing a static prop RPM test. I did this and went right into the break in procedure. To remain friends with your hangar neighbors, go off to the side and do the break end. An hour of a Rotax or Hirth screaming will drive them to violence. Take a wrench or channel locks of the size needed so you can adjust the prop and make sure you have enough fuel to complete the hour run. You should need around 5 gallons for a 503 I would think, just don't run out of fuel part way through. Last, hearing protection is advised. jerb At 02:23 AM 10/5/03 -0500, you wrote: >--> Kolb-List message posted by: "Mike Pierzina" > > > Hay Guys, > Stickin wit some tradition , the "subject" has nuthin 2 do wit > da question. > > Eye m wonder in F any body wood tell me there pitch on an IVO. Eye m > redi 2 break in my 503. I set it 2 13degrees , I'm hoping 2 B close > enough 4 da 1 our it takes wit out shuting down 2 re-adjust da pitch....I > can fine tune it afterwoods. > 503 / 2:58 , 3blade IVO 66" > > Tank U > > ________________________________ Message 7 _____________________________________ Time: 01:14:05 PM PST US From: jerb Subject: Re: Kolb-List: electric trim --> Kolb-List message posted by: jerb The rocker switches and motor should be in the cage - some cable should be extended out to the trim component or you may place the control surface to far out of balance resulting in possible flutter, something you don't want. jerb At 06:36 AM 10/5/03 -0500, you wrote: >--> Kolb-List message posted by: Ted Cowan > >Hello all. Had a great time at the Kolb flyin. Am just (hopefully) >completing my wiring of the instruments and guages. Am having difficulty >with grasping the wiring set up for the electric trim. This employs the use >of the motor from a battery powered (3volt) electric screw driver, black and >decker. there are also two micro switches to prevent overrun at both ends >of the spectrim. does anyone happen to have any idea as to how to wire this >up to a rocker type switch or a two way toggle switch? appreciate the >imput. I think it was designed by someone on the list at one point but I >cannot find the reference in the archives. thanks. ted cowan. p.s. I >have the original rocker from the screwdriver which I can use if I can >figure (I am really dumb) out how to work the micros shut off switches. > > ________________________________ Message 8 _____________________________________ Time: 03:17:06 PM PST US From: "John Williamson" Subject: Kolb-List: Website Update --> Kolb-List message posted by: "John Williamson" Fellow Kolbers, I just posted a new page on my website with photos that other Kolbers have sent to me this last week. I will post more when they come in. http://home.comcast.net/~KolbraPilot4/Additional_Kitty_Hawk.htm John Williamson Arlington, TX Kolb Kolbra, SN: 008, Jabiru 2200, 487 hours http://home.comcast.net/~kolbrapilot/ do not archive ________________________________ Message 9 _____________________________________ Time: 05:30:36 PM PST US From: "Richard Swiderski" Subject: Re: Kolb-List: ultrastar --> Kolb-List message posted by: "Richard Swiderski" Ron, I can't remember his name off hand. He is in the Miami area I believe. That was originally my baby. I almost feel like a low-life for having sold her. ....Richard Swiderski do not archive ----- Original Message ----- From: "ron wehba" Subject: Kolb-List: ultrastar > --> Kolb-List message posted by: "ron wehba" > > > who owns the blue/yellow Ustar with the long gear legs,I think it is in > florida.thanks ron.w. > > > > > > >
who owns the blue/yellow Ustar with the > long gear > legs,I think it is in florida.thanks ron.w.
> > ________________________________ Message 10 ____________________________________ Time: 06:12:50 PM PST US From: "ron wehba" Subject: Re: Kolb-List: ultrastar --> Kolb-List message posted by: "ron wehba" thanks, did you happen to install the forward cowl and windscreen,if so do you have any pics? inside? ----- Original Message ----- From: "Richard Swiderski" Subject: Re: Kolb-List: ultrastar > --> Kolb-List message posted by: "Richard Swiderski" > > Ron, > > I can't remember his name off hand. He is in the Miami area I believe. > That was originally my baby. I almost feel like a low-life for having sold > her. ....Richard Swiderski > > do not archive > > ----- Original Message ----- > From: "ron wehba" > To: > Subject: Kolb-List: ultrastar > > > > --> Kolb-List message posted by: "ron wehba" > > > > > > who owns the blue/yellow Ustar with the long gear legs,I think it is in > > florida.thanks ron.w. > > > > > > > > > > > > > >
who owns the blue/yellow Ustar with the > > long gear > > legs,I think it is in florida.thanks ron.w.
> > > > > > ________________________________ Message 11 ____________________________________ Time: 08:29:07 PM PST US From: BMWBikeCrz@aol.com Subject: Kolb-List: Venice Beach Fl ... --> Kolb-List message posted by: BMWBikeCrz@aol.com While at Venice Beach a Kolb flew oner North Bound ... Lookin Good ! Who R u ??? Dave Between 5:30 - 6:30 Pm Sunday ... While at Venice Beach a Ko= lb flew oner North Bound ... Lookin Good ! Who R u ???  Dave

Between 5:30 - 6:30 Pm Sunday ... ________________________________ Message 12 ____________________________________ Time: 10:57:36 PM PST US From: BMWBikeCrz@aol.com Subject: Kolb-List: Venice Beach Fl ... --> Kolb-List message posted by: BMWBikeCrz@aol.com While at Venice Beach a Kolb flew oner North Bound ... Lookin Good ! Who R u ??? Dave Between 5:30 - 6:30 Pm Sunday ... While at Venice Beach a Ko= lb flew oner North Bound ... Lookin Good ! Who R u ???  Dave

Between 5:30 - 6:30 Pm Sunday ...