Today's Message Index:
----------------------
1. 05:07 AM - Ontario Ultralights ? (Robert Schieck)
2. 06:18 AM - Re: Ontario Ultralights ? (Dallas Shepherd)
3. 07:34 AM - Re: Throttle (Larry Bourne)
4. 07:34 AM - Re: Hauck tracks (Larry Bourne)
5. 11:19 AM - Matrics TIME WARP (Mike Pierzina)
6. 12:59 PM - Re: Hauck tracks (Kirk Smith)
7. 03:05 PM - Oshkosh 2003 Update (John Williamson)
8. 03:37 PM - Kolb Mk III "max.flap extension speed-full flaps" (John Raeburn)
9. 05:29 PM - Re: John W's update (Bob Bean)
10. 08:58 PM - Re: Kolb Mk III "max.flap extension speed-full flaps" (Larry Cottrell)
11. 09:40 PM - Ontario Ultralights (Ron Behie)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Ontario Ultralights ? |
--> Kolb-List message posted by: Robert Schieck <rschieck@mers.com>
If you don't care what kind if UL you fly with then there is :
Baldwin CPB5 - where I am based.
Brampton - lots there as well
Volks/Tottingham - lots there
Mazlacks (Spelling) - bunch there as well
Where are you located in Toronto ?
keep smiling
Rob from Richmond Hill Ontario
>
> Time: 08:47:20 PM PST US
> From: "Frank Otta" <fotta@rogers.com>
> Subject: Kolb-List: Ontario Ultralights ?
>
> --> Kolb-List message posted by: "Frank Otta" <fotta@rogers.com>
>
> Hi All,
>
> Does anyone know of any club or group of ultralight pilots in the Southern
> Ontario region? I'm trying to determine if there are any such groups of
> people who get together, and of course fly together, in this area.
>
> Thanks
> Frank
>
> ..................................
> F. Otta
> Toronto, Ontario
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ontario Ultralights ? |
--> Kolb-List message posted by: "Dallas Shepherd" <cen23954@centurytel.net>
Try Woody at duesouth@govital.com . He should know more fliers in =0D
area.=0D
Dallas Shepherd=0D
Norfork, Ar=0D
=0D
-------Original Message-------=0D
=0D
From: kolb-list@matronics.com=0D
Subject: Kolb-List: Ontario Ultralights ?=0D
=0D
--> Kolb-List message posted by: "Frank Otta" <fotta@rogers.com>=0D
=0D
Hi All,=0D
=0D
Does anyone know of any club or group of ultralight pilots in the Southern=0D
Ontario region? I'm trying to determine if there are any such groups of=0D
people who get together, and of course fly together, in this area.=0D
=0D
Thanks=0D
Frank=0D
=0D
=2E..................................=0D
F. Otta=0D
Toronto, Ontario=0D
=0D
=0D
=0D
=0D
=0D
=0D
=0D
=2E
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: "Larry Bourne" <biglar@gogittum.com>
Move the throttle to the left side. Works real slyck, and not hard to do.
Lar. Do not Archive
Larry Bourne
Palm Springs, CA
Kolb Mk III - Vamoose N78LB
www.gogittum.com
----- Original Message -----
From: "Bob Bean" <slyck@frontiernet.net>
Subject: Re: Kolb-List: Website
> --> Kolb-List message posted by: Bob Bean <slyck@frontiernet.net>
>
> Actually most of us are sitting at home waiting for the other guy to start
> something. Three cheers for the sport pilot thingy, I went to a little
> local flyin recently and noticed numerous two-placer "ultralights"
> tied down. Looks like either some will just drop out or else there's
> going to be a bunch trying to get through the door at the same time.
> I'm still debugging my MkIII and taxiing a path through the grass.
> (actually the thing is covered with bug guts)
> A starting problem has reared it's head - exasperating since it did
> so well in the driveway. The Matco's perform about as I expected-
> marginally, but no surprise looking at those dinky little pads.
> Adjusted the elevator rod full in so I could get some reasonable
> "up" before I hit the throttle handle. - Any input on this is welcome.
> -BB do not archive
>
>
> Richard Harris wrote:
>
> >--> Kolb-List message posted by: "Richard Harris"
<rharris@magnolia-net.com>
> >
> >where did everyone go ?
> >
> >
> >Richard Harris
> >MK3 N912RH
> >
> >
> >
> >
> >
> >
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hauck tracks |
--> Kolb-List message posted by: "Larry Bourne" <biglar@gogittum.com>
He musta left it there to rub it in a bit. Ol' John's perty good about
pickin' up after himself. :-) Lar. Do
not Archive.
Larry Bourne
Palm Springs, CA
Kolb Mk III - Vamoose N78LB
www.gogittum.com
----- Original Message -----
From: "Kirk Smith" <snuffy@usol.com>
Subject: Kolb-List: Hauck tracks
> --> Kolb-List message posted by: "Kirk Smith" <snuffy@usol.com>
>
> Went out to the barn yesterday to check things over after getting home
from vacation and found an empty Meal Ready to Eat pack laying on the picnic
table. Got suspicious and checked the tall weeds now grown in the runway and
found the telltale tracks of an airplane. Talked to the neighbor and found
that John Hauck had indeed spent a night here while I was away. Darn!!!!
Sure would have liked to have gotten a pic of Miss P-fer sitting on my
runway. Kirk
>
> Do not archive
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Matrics TIME WARP |
--> Kolb-List message posted by: "Mike Pierzina" <planecrazzzy@lycos.com>
Hey Guys,
I must have went forward in time into September....I'll have
to make sure I look at the LOTTO NUMBERS before I go back....
I've been working on the plane this morning...and avoiding those brake cables
that run from the wheel thru the (ripped) fabric on the cage....
I think those 90 degree bends that Richard Pike (and I ) used for
the cables to the carbs would work good at getting a tight enough bend to run
the brake cable up the axle and avoid the dreaded "TRIPPING , RIPPING , LOOPS"
...... I know there are others that have ripped their fabric too.....
I'm working on installing an airspeed indicator right now..... but
I'll be changing over the brake cable soon. One good thing is , the cable will
be shorter so it can be done with just a little cutting of the existing set-up....just
thought I'd share the Idea.
Gotta Fly...
Mike in MN FSII 503 injected,3-66"IVO
,GPL ,EIS
DO NOT ARCHIVE
---
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail!
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hauck tracks |
--> Kolb-List message posted by: "Kirk Smith" <snuffy@usol.com>
> He musta left it there to rub it in a bit. Ol' John's perty good about
> pickin' up after himself. :-) Lar. Do
> not Archive.
Yeah that's what I sorta figured. :-) I drank the ice tea packet that was
left in the bag. Not bad stuff. Looks like it's a lot better than the
C-rats we got in Nam. Kirk
Do not archive
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Oshkosh 2003 Update |
--> Kolb-List message posted by: "John Williamson" <kolbrapilot@comcast.net>
Hello Kolb Aviators and Builders,
I got home from Oshkosh Friday evening. It was a relatively uneventful trip except
for the spectacular scenery and a challenging airstrip.
I have now landed the Kolbra in all of the lower 48 States.
I got to fly with a great group of pilots:
-- John Hauck, Kolb Mark III
-- Scott Trask, Kolb Mark III, put me up in his house and let me use his "airstrip"
-- Rick Neilsen, Kolb Mark III
-- Lloyd Cudnohufsky, Kit Fox
These guys put up with me and made the flight leg into Oshkosh even more memorable.
While at Scott's place, Aaron Gustafson flew his nice blue and yellow FireStar
in for use to check out. I also got to visit with Bill and Anna Vincent. Bill
flies a FireStar.
The flight was met at Oshkosh by Mary Jones (Editor of the 'Experimenter' magazine)
and an EAA photographer. They took photos and later conducted an interview
about my trips in the Kolbra.
We were also greeted by Ray Brown of TNK and treated very generously. The whole
crew at TNK was great as usual.
While at the Ultralight area at Oshkosh I got to meet:
John and Kathy Jung, John flies a FireStar.
Larry and Judy Gitt, Larry flies the only other customer built Kolbra in the world.
Tim Bjork. who is building a FireStar 2.
Several others that I am sorry to say I have forgotten their names.
Here are the stats for this trip:
Distance: 2580.2 nm (3280 sm)
Flight time: 39 hours 36 minutes
Max ground speed: 112.9 knots (129.9 mph)
Average ground speed: 65.2 knots (75 mph)
Landings; 23
I have just completed updating this trip on my website, so please visit and look
at the photos. If you find a broken link, please send me an email and let me
know.
http://home.comcast.net/~KolbraPilot4/KOSH.htm
John Williamson
Arlington, TX
Kolb Kolbra, N49KK, Jabiru 2200, 440 hours
http://home.comcast.net/~kolbrapilot
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Kolb Mk III "max.flap extension speed-full flaps" |
--> Kolb-List message posted by: John Raeburn <raeburn@snowhill.com>
I have a Kolb Mk III (582).
Does anyone know the max. speed for flying with the flaps fully extended?
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | re: John W's update |
--> Kolb-List message posted by: Bob Bean <slyck@frontiernet.net>
Thanks for taking the time and effort on a fine photo-journey. -BB
do not archive
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kolb Mk III "max.flap extension speed-full flaps" |
--> Kolb-List message posted by: "Larry Cottrell" <lcottrel@kfalls.net>
I don't believe that you want to do more than 60 mph.
larry
----- Original Message -----
From: "John Raeburn" <raeburn@snowhill.com>
Subject: Kolb-List: Kolb Mk III "max.flap extension speed-full flaps"
> --> Kolb-List message posted by: John Raeburn <raeburn@snowhill.com>
>
> I have a Kolb Mk III (582).
> Does anyone know the max. speed for flying with the flaps fully extended?
>
>
>
>
>
>
>
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Ontario Ultralights |
--> Kolb-List message posted by: "Ron Behie" <behie@gtn.on.ca>
Yes there are. If you are going, ask at the UPAC AGM being held in a couple
weeks.
----- Original Message ----- >
> --> Kolb-List message posted by: "Frank Otta" <fotta@rogers.com>
>
> Hi All,
>
> Does anyone know of any club or group of ultralight pilots in the Southern
> Ontario region? I'm trying to determine if there are any such groups of
> people who get together, and of course fly together, in this area.
>
> Thanks
> Frank
>
> ..................................
> F. Otta
> Toronto, Ontario
>
>
---
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|