Today's Message Index:
----------------------
1. 01:16 AM - Re: Wing spacers (owner-kolb-list-server@matronics.com)
2. 05:13 AM - kitplanes reply (Paul Petty)
3. 09:03 AM - Re: dodge tranny failures ... (Larry Bourne)
4. 03:48 PM - Re: dodge tranny failures ... (Dale Sellers)
5. 06:42 PM - Re: dodge tranny failures ... (jerb)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Wing spacers |
--> Kolb-List message posted by:
Hello Jimmy,
I cut a rubber grommet in two in the middle. The size of the grommet is the
size of a quarter. Glue the pieces to each side of the wing strut. Easy to
install the clevis pin this way. Is is not very tight, but does eliminate much
back and forth movement in the wing strut.
Regards,
Johann G.
Firestar II
Iceland.
> --> Kolb-List message posted by: Jimmy <jhankin@planters.net>
>
> To those of you that fold your wings for storage.
>
> On the forward wing bolt and the strut, where the strut bolts to the cage, do
> you use those spacers to stabilize these attachment points?
>
> If you use them, how do you install them and hold the wing in place while
> inserting the bolts?
>
> Do you use them at all?
>
> Do Not Archive.
>
> Thanks for an answer.
>
> Jimmy Hankinson
> 912-863-7384
> Rocky Ford, Ga. 30455
> jhankin@planters.net
> Kolb Firefly/447/275hrs
> Local field, Pegasus/2000/Grass
> Airport JYL/Sylvania, Ga.
>
>
>
>
>
>
-------------------------------------------------
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: "Paul Petty" <lynnp@c-gate.net>
Fellow Kolbers,
This is a reply I received from Kitplanes rag.....
Paul & Fellow Kolbers:
Obviously, it was an error. We insert company names to help specifically ID aircraft,
and we introduced the error internally. We're quite aware that the Challenger
is not produced by Kolb; it was an honest mistake!
You'll see a correction in the August issue "Around the Patch" column. Thanks for
bringing it to our attention.
Brian E. Clark
Editor
KITPLANES Magazine
973/227-7660
Paul Petty
Building Ms. Dixie
Kolbra/912UL/Warp
www.c-gate.net/~ppetty
do not archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: dodge tranny failures ... |
--> Kolb-List message posted by: "Larry Bourne" <biglar@gogittum.com>
Including this Dodge diesel owner who has just 55,000 miles on his 6 speed,
and is totally happy with his "junk Dodge." Lar.
Do not Archive.
Larry Bourne
Palm Springs, CA
Building Kolb Mk III
N78LB Vamoose
www.gogittum.com
----- Original Message -----
From: "Ken korenek" <kkorenek@comcast.net>
Subject: Re: Kolb-List: dodge tranny failures ...
> --> Kolb-List message posted by: Ken korenek <kkorenek@comcast.net>
>
> I thought the purpose of this list was to be a forum for the discussion
> of Kolb related issues and not the venue to spew misguided hatred for an
> American made product, which, by the way, is well received by many...
>
> Ken Korenek
> N104KK
>
> artdog1512 wrote:
>
> >--> Kolb-List message posted by: artdog1512 <nazz57@yahoo.com>
> >
> >A good friend of mine here uses a Dodge in very heavy
> >service and has used Dodge spec synthetic in his 5 spd
> >and has had two
> >tranny failure in 150,000 mi (maybe related to not
> >monitoring levels
> >well
> >enough,)
> >
> > the tranny failure wasn't because of monitoring
> >the level of oil, the tranny failed because it's a
> >Dodge.. their junk! i wouldn't own a chrysler product.
> >those Cummins engines might last 500,000 miles but the
> >rest of the truck won't. chryslers are notorious for
> >tranny problems. ..... there are 2 kind of people that
> >own chrysler products, those that have had tranny
> >problems and those that will... tim
> >do not archive
> >
> >
> >
> >
> >__________________________________
> >http://movies.yahoo.com/showtimes/movie?mid=1808405861
> >
> >
> >
> >
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: dodge tranny failures ... |
--> Kolb-List message posted by: "Dale Sellers" <dsel1@bellsouth.net>
I'm on my fifth Dodge truck and wouldn't have anythinh else.
do not archive
----- Original Message -----
From: "Larry Bourne" <biglar@gogittum.com>
Subject: Re: Kolb-List: dodge tranny failures ...
> --> Kolb-List message posted by: "Larry Bourne" <biglar@gogittum.com>
>
> Including this Dodge diesel owner who has just 55,000 miles on his 6
speed,
> and is totally happy with his "junk Dodge." Lar.
> Do not Archive.
>
> Larry Bourne
> Palm Springs, CA
> Building Kolb Mk III
> N78LB Vamoose
> www.gogittum.com
>
> ----- Original Message -----
> From: "Ken korenek" <kkorenek@comcast.net>
> To: <kolb-list@matronics.com>
> Subject: Re: Kolb-List: dodge tranny failures ...
>
>
> > --> Kolb-List message posted by: Ken korenek <kkorenek@comcast.net>
> >
> > I thought the purpose of this list was to be a forum for the discussion
> > of Kolb related issues and not the venue to spew misguided hatred for an
> > American made product, which, by the way, is well received by many...
> >
> > Ken Korenek
> > N104KK
> >
> > artdog1512 wrote:
> >
> > >--> Kolb-List message posted by: artdog1512 <nazz57@yahoo.com>
> > >
> > >A good friend of mine here uses a Dodge in very heavy
> > >service and has used Dodge spec synthetic in his 5 spd
> > >and has had two
> > >tranny failure in 150,000 mi (maybe related to not
> > >monitoring levels
> > >well
> > >enough,)
> > >
> > > the tranny failure wasn't because of monitoring
> > >the level of oil, the tranny failed because it's a
> > >Dodge.. their junk! i wouldn't own a chrysler product.
> > >those Cummins engines might last 500,000 miles but the
> > >rest of the truck won't. chryslers are notorious for
> > >tranny problems. ..... there are 2 kind of people that
> > >own chrysler products, those that have had tranny
> > >problems and those that will... tim
> > >do not archive
> > >
> > >
> > >
> > >
> > >__________________________________
> > >http://movies.yahoo.com/showtimes/movie?mid=1808405861
> > >
> > >
> > >
> > >
> >
> >
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: dodge tranny failures ... |
--> Kolb-List message posted by: jerb <ulflyer@verizon.net>
I'm on my second Dodge Dakota in 10 years - did have to have the tranny
rebuilt on the second one after 100K but still like my Dakota. Got my eye
on a Quad Cab Dakota.
jerb
At 06:44 PM 5/15/04 -0400, you wrote:
>--> Kolb-List message posted by: "Dale Sellers" <dsel1@bellsouth.net>
>
>I'm on my fifth Dodge truck and wouldn't have anythinh else.
>do not archive
>----- Original Message -----
>From: "Larry Bourne" <biglar@gogittum.com>
>To: <kolb-list@matronics.com>
>Subject: Re: Kolb-List: dodge tranny failures ...
>
>
> > --> Kolb-List message posted by: "Larry Bourne" <biglar@gogittum.com>
> >
> > Including this Dodge diesel owner who has just 55,000 miles on his 6
>speed,
> > and is totally happy with his "junk Dodge." Lar.
> > Do not Archive.
> >
> > Larry Bourne
> > Palm Springs, CA
> > Building Kolb Mk III
> > N78LB Vamoose
> > www.gogittum.com
> >
> > ----- Original Message -----
> > From: "Ken korenek" <kkorenek@comcast.net>
> > To: <kolb-list@matronics.com>
> > Subject: Re: Kolb-List: dodge tranny failures ...
> >
> >
> > > --> Kolb-List message posted by: Ken korenek <kkorenek@comcast.net>
> > >
> > > I thought the purpose of this list was to be a forum for the discussion
> > > of Kolb related issues and not the venue to spew misguided hatred for an
> > > American made product, which, by the way, is well received by many...
> > >
> > > Ken Korenek
> > > N104KK
> > >
> > > artdog1512 wrote:
> > >
> > > >--> Kolb-List message posted by: artdog1512 <nazz57@yahoo.com>
> > > >
> > > >A good friend of mine here uses a Dodge in very heavy
> > > >service and has used Dodge spec synthetic in his 5 spd
> > > >and has had two
> > > >tranny failure in 150,000 mi (maybe related to not
> > > >monitoring levels
> > > >well
> > > >enough,)
> > > >
> > > > the tranny failure wasn't because of monitoring
> > > >the level of oil, the tranny failed because it's a
> > > >Dodge.. their junk! i wouldn't own a chrysler product.
> > > >those Cummins engines might last 500,000 miles but the
> > > >rest of the truck won't. chryslers are notorious for
> > > >tranny problems. ..... there are 2 kind of people that
> > > >own chrysler products, those that have had tranny
> > > >problems and those that will... tim
> > > >do not archive
> > > >
> > > >
> > > >
> > > >
> > > >__________________________________
> > > >http://movies.yahoo.com/showtimes/movie?mid=1808405861
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|