----------------------------------------------------------
                           Kolb-List Digest Archive
                                      ---
                     Total Messages Posted Fri 05/20/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:11 AM - test  (Jimmy)
     2. 07:32 PM - rods  (robert bean)
     3. 08:28 PM - Re: rods  (Richard Pike)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:11:28 AM PST US
From: "Jimmy" <jhankin@planters.net>
Subject: Kolb-List: test

--> Kolb-List message posted by: "Jimmy" <jhankin@planters.net>

Just checking






________________________________  Message 2  _____________________________________


Time: 07:32:57 PM PST US
From: robert bean <slyck@frontiernet.net>
Subject: Kolb-List: rods

--> Kolb-List message posted by: robert bean <slyck@frontiernet.net>

kolbers, I shall be experimenting with the Richard Pike aileron fix.
I drilled new holes in the crank arms, only half the distance he did,
but I want to see what it feels like.  My problem is the old rods were
constructed with insufficient adjustment even for that.  I have
new tubes and inserts and want to weld instead of rivet them as I
hear is the current factory way.  Can someone email me a pic
of theirs? (closeup of joint)  I would like to see the method.
-thanx, BB
do not archive






________________________________  Message 3  _____________________________________


Time: 08:28:09 PM PST US
From: Richard Pike <richard@bcchapel.org>
Subject: Re: Kolb-List: rods

--> Kolb-List message posted by: Richard Pike <richard@bcchapel.org>

First thing tomorrow -

Richard Pike
MKIII N420P (420ldPoops)

do not archive

At 08:57 PM 5/20/2005 -0400, you wrote:

>--> Kolb-List message posted by: robert bean <slyck@frontiernet.net>
>
>kolbers, I shall be experimenting with the Richard Pike aileron fix.
>I drilled new holes in the crank arms, only half the distance he did,
>but I want to see what it feels like.  My problem is the old rods were
>constructed with insufficient adjustment even for that.  I have
>new tubes and inserts and want to weld instead of rivet them as I
>hear is the current factory way.  Can someone email me a pic
>of theirs? (closeup of joint)  I would like to see the method.
>-thanx, BB
>do not archive
>
>