Today's Message Index:
----------------------
1. 03:38 AM - Ultrastar down (Edward Steuber)
2. 04:14 AM - Re: Ultrastar down (John Cooley)
3. 07:28 AM - Re: Ultrastar down (dama)
4. 03:40 PM - Ms. Dixie (Paul Petty)
5. 04:34 PM - Re: Ms. Dixie (Mitty)
6. 04:39 PM - Re: Ms. Dixie (DCulver701@aol.com)
7. 06:37 PM - Intercom Noise (c b)
8. 06:51 PM - fly-in (Mhqqqqq@aol.com)
9. 07:05 PM - Michigan Thumb Tour, September 17 (kfackler)
10. 09:08 PM - Re: Intercom Noise (ElleryWeld@AOL.COM)
11. 09:10 PM - Re: Ultrastar down (Flycrazy8@aol.com)
12. 09:14 PM - Re: fly-in (Flycrazy8@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: "Edward Steuber" <esteuber@rochester.rr.com>
All,
Well , I finally had the Cuyuna quit and had to land in a corn field......
damage to the nose and a few cage tubes but nothing to the boom tube , wings
or tail. Removing the parts without damaging them or the corn further was the
challenge....I'll add the details later ....need to go to work !
Ed in
Western NY
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: "John Cooley" <johnc@datasync.com>
Ed,
Glad to hear that you came out of the deal without any bumps. Hope you get
your plane repaired soon.
Do not archive
John Cooley
Lucedale, Ms.
FS II
-----Original Message-----
From: owner-kolb-list-server@matronics.com
[mailto:owner-kolb-list-server@matronics.com] On Behalf Of Edward Steuber
Subject: Kolb-List: Ultrastar down
--> Kolb-List message posted by: "Edward Steuber"
<esteuber@rochester.rr.com>
All,
Well , I finally had the Cuyuna quit and had to land in a corn
field...... damage to the nose and a few cage tubes but nothing to the boom
tube , wings or tail. Removing the parts without damaging them or the corn
further was the challenge....I'll add the details later ....need to go to
work !
Ed
in Western NY
--
--
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ultrastar down |
--> Kolb-List message posted by: "dama" <dama@mindspring.com>
Good job on keeping your cool, Ed. Hope the farmer's last name is not
"McNasty"...
Kip
http://www.springeraviation.net/
----- Original Message -----
From: "Edward Steuber" <esteuber@rochester.rr.com>
Subject: Kolb-List: Ultrastar down
> --> Kolb-List message posted by: "Edward Steuber"
<esteuber@rochester.rr.com>
>
> All,
> Well , I finally had the Cuyuna quit and had to land in a corn
field...... damage to the nose and a few cage tubes but nothing to the boom
tube , wings or tail. Removing the parts without damaging them or the corn
further was the challenge....I'll add the details later ....need to go to
work !
>
Ed in Western NY
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
required 4.6, BAYES_44 -0.00, HTML_60_70 0.11, HTML_MESSAGE 0.25)
--> Kolb-List message posted by: "Paul Petty" <Lynnp@c-gate.net>
Hi kolbers,
Just letting everyone know I'm still kicking and sawing up aluminum here in the
HEAT of central MS. Thought I might share a few pictures of what I have been
up to.
http://www.c-gate.net/~ppetty/photos/P8240007.JPG
Mad man found the drill
http://www.c-gate.net/~ppetty/photos/P8240008.JPG
Console yippy!
http://www.c-gate.net/~ppetty/photos/P8240010.JPG
Hoping to see everyone at TNK Homecoming!
Take care
Paul Petty
Building Ms. Dixie
Kolbra/912UL/Warp
do not archive
do not archive
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: Mitty <benny_bee_01@yahoo.com>
Paul,Buddy!You're kicking!! :)Looking forward to drive
down there one of these days have a beer or two with
ya.Just need to find a day or two off work.We became
extremley busy at work which is good comrade to 32
hours/week last month.Over time takes me closer to
desired Kolb :)
Anyhow,I'll try to come out eventually and hang out
!:)
Do not archive ...or do if you want.:)
--- Paul Petty <Lynnp@c-gate.net> wrote:
> --> Kolb-List message posted by: "Paul Petty"
> <Lynnp@c-gate.net>
>
> Hi kolbers,
>
> Just letting everyone know I'm still kicking and
> sawing up aluminum here in the HEAT of central MS.
> Thought I might share a few pictures of what I have
> been up to.
>
> http://www.c-gate.net/~ppetty/photos/P8240007.JPG
>
> Mad man found the drill
>
> http://www.c-gate.net/~ppetty/photos/P8240008.JPG
>
> Console yippy!
>
> http://www.c-gate.net/~ppetty/photos/P8240010.JPG
>
>
> Hoping to see everyone at TNK Homecoming!
>
> Take care
>
> Paul Petty
> Building Ms. Dixie
> Kolbra/912UL/Warp
>
>
> do not archive
>
>
> do not archive
>
>
>
> browse
> Subscriptions page,
> FAQ,
>
>
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: DCulver701@aol.com
Hi Paul, work looks good! How many hours you got into your Kolbra now?
From the pictures it doesn't look like you had the powder coating done? Hope
to see some more pictures soon. Best regards, Dave Culver
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: "c b" <seedeebee@hotmail.com>
Hey Fellow Kolbers,
So I got my Mark III Amphibian flying only to break the spreader bar
on landing... The system was not strong enough for landing loads on
the gear.
It's now about ready to go on land gear.
I had to send the floats back to Full-Lotus to be repaired. Of course
when they got the floats, they told me to throw them away and start
over... (ouch) So the brand new floats should be here next week (yay!)
Anyway, one thing I noticed while flying is that the intercom makes so
much noise in the headsets that you can't hear anything. It's almost
better to leave the headsets behind.
The noise seems to be electronic. It is certainly coming from the
headsets and it increases in volume when the engine speed increases.
Does anyone have a solution? It's just a cheap intercom, but I didn't
really want to buy a new one if I didn't need to.
If I do need a new one, what do you folks recomend?
Thanks!
Chris Banys
Mark III Amphibian - 912
N10FR
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
FROM_LOCAL_NOVOWEL@roxy.matronics.com, From:,
localpart@roxy.matronics.com, has@roxy.matronics.com,
series@roxy.matronics.com, of@roxy.matronics.com,
non-vowel@roxy.matronics.com, letters@roxy.matronics.com
--> Kolb-List message posted by: Mhqqqqq@aol.com
the 13th annual fly-in at cherry grove airpark in wanamingo mn. will be this
sunday aug.28th.
you are all invited.
The runway is 1,200 feet long, lots of planes, cars and oddities will be on
hand.
Also there is a chuckwagon for your fine dinning pleasure.
the link to our websight is
_www.theflyin.com_ (http://www.theflyin.com)
mark hansen
twinstar
s.e.minnesota
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Michigan Thumb Tour, September 17 |
--> Kolb-List message posted by: "kfackler" <kfackler@ameritech.net>
My flying club, the Greater Thumb Ultralight Flyers (GTUF), is organizing one of
our semi-annual Michigan Thumb Tours for Saturday, September 17. While the beautiful
fall colors of Michigan likely won't quite be at their peak, there should
still be plenty of great scenery to enjoy.
We'll rendezvous and start the tour at Arnold Field near Croswell MI, then circumnavigate
the Michigan Thumb counter-clockwise, following the coastline northward
with several stops for fuel and one for a pizza lunch. The tour turns inland
at Sebewaing and pilots will depart the tour for their respective home bases
from either there or the last planned stop at Marlette.
You do NOT need to be a member to join us. While there are many aircraft types
that will be accompanying the tour, we will have between four and six Kolbs flown
by our members. Any of you here on the list who would be interested in joining
us would be welcome, you don't need to be a member of the club. However,
to be part of the flight there is a small fee to cover the lunch and expenses
of a volunteer ground crew's who will follow the flight with a recovery vehicle,
a gas truck, safety equipment, cold drinks, and so forth.
If interested, please check out the club's website for more information or to register
for the trip. The URL for the website is:
http://www.staliteaviation.com/gtuf/gtuf_menu.html
-Ken Fackler
Kolb Mark II / A722KWF
Rochester MI
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Intercom Noise |
--> Kolb-List message posted by: ElleryWeld@aol.com
Chris Banys
are you using resistor spark plugs, are your plug wires shielded, are your
Kill wires shielded, these will all cause static noise in your head set if you
have all that done then I guess your only option is to purchase a new headset
and or Radio if so I use a Softcomm head set with noise canceling and a Icom
IC-A22 Transceiver this setup works great for me
Original Firestar Plus in Maine Ellery Batchelder Jr.
do not archive
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ultrastar down |
--> Kolb-List message posted by: Flycrazy8@aol.com
--> Kolb-List message posted by: "Edward Steuber" <esteuber@rochester.rr.com>
All,
Well , I finally had the Cuyuna quit and had to land in a corn field......
damage to the nose and a few cage tubes but nothing to the boom tube , wings
or tail. Removing the parts without damaging them or the corn further was the
challenge....I'll add the details later ....need to go to work !
Ed in Western NY
Hey Ed,
Been there and done that tooo......except mine was in a Cotton patch
Glad you at least made a "good" landing........and walked away from it.
Stephen
Former UltraStar
Present Firefly
Lower Alabama
Do Not Archive
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Kolb-List message posted by: Flycrazy8@aol.com
--> Kolb-List message posted by: Mhqqqqq@aol.com
the 13th annual fly-in at cherry grove airpark in wanamingo mn. will be
this
sunday aug.28th.
you are all invited.
Thanks for the invite
but tooo far and snakey for me : - ))
Stephen
Lower Alabama
Firefly
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|