---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sat 01/14/06: 66 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:35 AM - Re: Re: Stall speed / GPS (pat ladd) 2. 04:19 AM - Re: q (pat ladd) 3. 05:06 AM - nuts and bolts (Edward Steuber) 4. 05:48 AM - Re: nuts n bolts (Paul Petty) 5. 06:24 AM - Re: Re: Stall speed / GPS (Jack B. Hart) 6. 06:48 AM - Re: q (russ kinne) 7. 06:50 AM - Re: Re: q (russ kinne) 8. 06:53 AM - Proper angle for bend in 4130 landing gear??? (John Bickham) 9. 07:00 AM - Re: Re: Stall speed / GPS (russ kinne) 10. 07:10 AM - Re: Re: q (robert bean) 11. 07:26 AM - Re: q (ray anderson) 12. 07:31 AM - Re: q (JetPilot) 13. 07:59 AM - Re: nuts and bolts (ray anderson) 14. 08:04 AM - Re: Stall speed / GPS (JetPilot) 15. 08:13 AM - DC-9 (J W Hauck) 16. 09:39 AM - Transponder "Cert" question (Mike Pierzina) 17. 10:51 AM - Re: Transponder "Cert" question (JetPilot) 18. 11:10 AM - cotter pins (boyd) 19. 11:10 AM - kolb washout / trim (boyd) 20. 11:37 AM - Small video of kolb landing in winter ... (Noel) 21. 11:40 AM - Re: Transponder "Cert" question (Mike Pierzina) 22. 11:43 AM - Re: Transponder "Cert" question (Richard Pike) 23. 11:54 AM - Re: kolb washout / trim (Richard Pike) 24. 12:26 PM - Re: Transponder "Cert" question (Charlie England) 25. 12:28 PM - Re: Transponder "Cert" question (Mike Pierzina) 26. 12:59 PM - Re: Small video of kolb landing in winter ... (JetPilot) 27. 01:14 PM - Re: Small video of kolb landing in winter ... (flht99reh) 28. 01:33 PM - Re: Transponder "Cert" question (Ed Chmielewski) 29. 01:45 PM - Re: Re: Transponder "Cert" question (Robert Noyer) 30. 01:46 PM - Re: Small video of kolb landing in winter ... (Chris Mallory) 31. 01:50 PM - Re: Small video of kolb landing in winter ... (Chris Mallory) 32. 02:51 PM - Re: Small video of kolb landing in winter ... (Mike Schnabel) 33. 03:37 PM - Re: Small video of kolb landing in winter ... (John Hauck) 34. 03:42 PM - Re: DC-9 (John Hauck) 35. 03:43 PM - Re: nuts n bolts (Don G) 36. 03:53 PM - Re: Transponder "Cert" question (John Hauck) 37. 04:11 PM - Re: VORTEX GENERATORS (owner-kolb-list-server@matronics.com) 38. 04:27 PM - Re: Transponder "Cert" question (Mike Pierzina) 39. 04:48 PM - Re: Transponder "Cert" question (John Hauck) 40. 04:52 PM - Re: Transponder "Cert" question (John Hauck) 41. 04:56 PM - Re: Re: VORTEX GENERATORS (Mike Schnabel) 42. 05:19 PM - Re: Re: VORTEX GENERATORS (John Hauck) 43. 05:30 PM - Re: 40 mph stall (jdmurr@juno.com) 44. 05:32 PM - Re: Transponder "Cert" question (Mike Pierzina) 45. 05:36 PM - Re: Transponder "Cert" question (John Hauck) 46. 05:46 PM - Mode C Veil Question (jdmurr@juno.com) 47. 05:53 PM - Re: Re: DC-9 (Robert Noyer) 48. 05:56 PM - Re: Re: VORTEX GENERATORS (Mike Schnabel) 49. 06:07 PM - Re: DC-9 (John Hauck) 50. 06:24 PM - Re: VORTEX GENERATORS (John Hauck) 51. 06:24 PM - Re: Mode C Veil Question (Roger Lee) 52. 07:01 PM - Re: Re: VORTEX GENERATORS (Mike Schnabel) 53. 07:01 PM - Re: Re: VORTEX GENERATORS (Jack B. Hart) 54. 07:30 PM - Re: Re: VORTEX GENERATORS (Beauford) 55. 07:32 PM - Re: DC-9 (JetPilot) 56. 07:40 PM - Re: Small video of kolb landing in winter ... (Noel) 57. 07:44 PM - Re: Re: Mode C Veil Question (Charlie England) 58. 07:48 PM - Re: Small video of kolb landing in winter ... (Noel) 59. 07:56 PM - Re: Re: VORTEX GENERATORS (Larry Cottrell) 60. 07:56 PM - Re: Re: VORTEX GENERATORS (Richard Pike) 61. 08:03 PM - Re: Small video of kolb landing in winter ... (John Hauck) 62. 08:08 PM - 2-Stroke vs 4-Stroke (frank & margie) 63. 08:12 PM - Re: VORTEX GENERATORS (John Hauck) 64. 08:51 PM - Re: Stall speed / GPS (John Jung) 65. 09:17 PM - Re: Re: DC-9 (Ed Chmielewski) 66. 10:51 PM - Re: nuts n bolts TRICK (WhiskeyVictor36@aol.com) ________________________________ Message 1 _____________________________________ Time: 02:35:01 AM PST US From: "pat ladd" Subject: Re: Kolb-List: Re: Stall speed / GPS --> Kolb-List message posted by: "pat ladd" My Firestar stalls at 38 or 39 when not in ground effect>> Hi All, I am a bit surprised that anyone knows the stalling speed when low enough to be in ground effect. I don`t think I have ever looked at the ASI after coming `over the hedge` and certainly not after the round out. Surely at that part of the landing you should be looking at `the picture` through the windscreen, keeping wings level and `feeling` for the ground, not looking at instruments. Cheers Pat -- ________________________________ Message 2 _____________________________________ Time: 04:19:11 AM PST US From: "pat ladd" Subject: Re: Kolb-List: q --> Kolb-List message posted by: "pat ladd" do repeated control checks, right to the stops ...>> Hi, don`t get me wrong, so do I, and check that the right aileron comes down when I put the stick left but that is more to check against the possibility of cross connected cables or some animal hibernating in the `works` somewhere than the incredibly remote chance of a rock in the elevator. Mind you I carry a bag of salt so that I can throw some over my shoulder..... Cheers Pat -- ________________________________ Message 3 _____________________________________ Time: 05:06:46 AM PST US From: "Edward Steuber" Subject: Kolb-List: nuts and bolts --> Kolb-List message posted by: "Edward Steuber" You guys are correct about the turning bolts versus the compression bolts. The nylocs are suppose to be used in a non heat environment and metal locks used in "high" heat areas. And I mean HIGH HEAT areas like exhausts. You can correct me if I am wrong (and I know you will) but on a few engines ( P&W R-985 comes to mind) the thing is literally put together with Nylocs everywhere. I have been operating and maintaining these engines for 32 years cropdusting and I have never seen a Nyloc (big or small) lose its locking ability from heat...or melt out the Nyloc material. So when someone tells you ..no nylocs forward of the firewall , there are exceptions .......and in this case some very big ones....... Anybody know why every P&W overhaul shop in the country does this ? ....What's the basis for approval ? When I am working on standard category aircraft I follow all the "rules"..... but on my Ultralights (non N numbered) I do what's "necessary" ... Enquiring ED in Western NY ________________________________ Message 4 _____________________________________ Time: 05:48:27 AM PST US Subject: Kolb-List: Re: nuts n bolts From: "Paul Petty" --> Kolb-List message posted by: "Paul Petty" Thanks for the tips guys. When I read what should be done or why a certian method should be used, I follow instructions. Avaition is a new world to me. I have learned that "things" happen to airplanes that never happen to other vehicles. I asume that this bolt method is a result of testing and or failure at some point. Just for the hell of it if any of you care to take time, explain the 3 washer deal. So you wont think I'm a complete idiot, Let me give you some background on yours truely :D . My involement with "moving" parts began at the early age of 5 when my father gave me my first home made motorcycle. He knew i liked to ride my bicycle with "no hands" and warned me that this new motorcycle would not allow such. Well I didnt beleive him and as soon as I was out of his watchfull eye (he only had one) I tested his "theory" He was right! My entire life I have built,raced,crashed motorcycles,boats and gocarts. With this background, you can see why I cant see why a "rotating" bolt with a drilled end and cotter pin is better than a nyloc nut. But because thats the required method I will obey! Think about the old days with cars that had drilled spindles with cottor pins. They fell off all the time. I have never heard of a wheel falling off a front wheel drive vehicle with a lock nut :D One more thing and I will go back in my corner and finish this Kolb. Airplanes in general "construction wise" blow my mind. Example, This Kolb has a massive 1/2" bolt that goes through the spar into a tiny tang that then has a super tiny pin that holds our wings on. I trust it. Understand it? No sheesh! Take care guys -------- Paul Petty Kolbra #12 Ms Dixie Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3859#3859 ________________________________ Message 5 _____________________________________ Time: 06:24:49 AM PST US From: "Jack B. Hart" Subject: Re: Kolb-List: Re: Stall speed / GPS --> Kolb-List message posted by: "Jack B. Hart" At 10:31 AM 1/14/06 -0000, you wrote: >--> Kolb-List message posted by: "pat ladd" > >My Firestar stalls at 38 or 39 when not in ground effect>> > >Hi All, > >I am a bit surprised that anyone knows the stalling speed when low enough >to be in ground effect. I don`t think I have ever looked at the ASI after >coming `over the hedge` and certainly not after the round out. >Surely at that part of the landing you should be looking at `the picture` >through the windscreen, keeping wings level and `feeling` for the ground, >not looking at instruments. > >Cheers > >Pat > Pat, The easiest and may be the safest way to determine ground effect stall speed is to tease the plane off the ground in the three point stance. Pick a no wind day and use a hard surface runway and inflate the tires to the max limit to minimize the rolling resistance. For the FireFly to lift off in the three point stance, I apply about 5 degrees flaperon and I hold the stick back against the stop. By very slowly advancing the throttle, you can get it to float off at minimum air speed. If the runway is long enough you can back off the throttle and repeat the process several times. This is the method, I used to determine wing vortex generator placement effect on the FireFly. With a little practice you can become very good at flying at minimum speed a foot or so above the runway while keeping an eye on the ASI. Jack B. Hart FF004 Winchester, IN ________________________________ Message 6 _____________________________________ Time: 06:48:38 AM PST US From: russ kinne Subject: Re: Kolb-List: q --> Kolb-List message posted by: russ kinne It was at LGA, there were I think 61 killed. I knew one of them slightly. do not archive On Jan 13, 2006, at 8:55 PM, Ed Chmielewski wrote: > --> Kolb-List message posted by: "Ed Chmielewski" > > > Hi Pat/Russ/All, > > That very accident is why I and many other pilots I know do > repeated > control checks, right to the stops (no 'wigglin'). Can't be too > careful > when leaving the ground. > I read that an aviation writer, may have been Bob Buck, > witnessed > the accident at the end of a trip. IIRC, the crew was > repositioning (5 or 6 > killed?). > > Ed in JXN(MI) > MkII/503 > > Do not archive. > > > ----- Original Message ----- > From: "pat ladd" > To: > Sent: Friday, January 13, 2006 4:15 PM > Subject: Re: Kolb-List: q > > >> --> Kolb-List message posted by: "pat ladd" >> >> Years ago at LGA a DC-9 (?) crashed >> because a rock had blown into the elevator-hinge when the pilot ran >> up his engines; locked the elevators >> >> >> Hi Russ, >> >> What are the odds of that happening again? If we all operated on >> the basis >> of all those million to one chances we would all stay in bed. >> That kind of thinking is being pushed by the hundreds of Health >> and Safety >> Inspectors that swarm over the country wasting every ones time >> trying to >> guard against zillion to one risks. > > ________________________________ Message 7 _____________________________________ Time: 06:50:14 AM PST US From: russ kinne Subject: Re: Kolb-List: Re: q --> Kolb-List message posted by: russ kinne Not to start a long discussion but the rock got in during engine runup, not takeoff roll. A last-minute controls check is not "being paranoid" and would have saved 61 lives. IMHO it's just good common sense. do not archive On Jan 13, 2006, at 9:46 PM, JetPilot wrote: > --> Kolb-List message posted by: "JetPilot" > > > edchmiel(at)mindspring.co wrote: >> >> >> That very accident is why I and many other pilots I know do repeated >> control checks, right to the stops (no 'wigglin'). Can't be too >> careful >> when leaving the ground. >> >> > > > The procedure in the airlines is for each pilot to do one control > check before takeoff. All the control checks in the world will not > help you if a rock gets thrown into the elevator on takeoff. If > you get a guy that is so paranoid about the controls that he is > constantly checking it, repeated times before takeoff, he will > probably forget something just as important such as setting the > flaps, the trim, or a million other things that need his > attention. Being paranoid about any item to the point of > distraction is just plain bad. > > Michael A. Bigelow > > -------- > NO FEAR - If you have no fear you did not go as fast as you could > have !!! > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=3816#3816 > > ________________________________ Message 8 _____________________________________ Time: 06:53:19 AM PST US Subject: Kolb-List: Proper angle for bend in 4130 landing gear??? From: "John Bickham" --> Kolb-List message posted by: "John Bickham" Hello list, Need some help and advice for the angle I should use to bend 4130 landing gear. I am fabricating my own landing gear. I know some of you may respond that I should just buy the +$400 set from TNK. I am using 3/4" axles and they only supply the gear with 5/8" axles. The cage sockets are at a 30 degree angle. I'm not sure if the bend results in the lower portion of the 4130 gear is exactly perpendicular to the ground or if it a little less than 30 degrees giving it a little bow out. The pictures I looked at on the TNK website (Mark IIIX) have a little bow out. Was that design or a few rough landings? If any of you have the 4130 landing gear and can get a measurement for me, I would greatly appreciate it. Pictures would be great too. -------- Thanks too much, John Bickham Mark III-C Using my Repairman Certificate St. Francisville, LA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3866#3866 ________________________________ Message 9 _____________________________________ Time: 07:00:18 AM PST US From: russ kinne Subject: Re: Kolb-List: Re: Stall speed / GPS --> Kolb-List message posted by: russ kinne Pat That's what that cute sexy little blonde passenger is for! Let her do the looking -- Russ do not achive On Jan 14, 2006, at 4:31 AM, pat ladd wrote: > --> Kolb-List message posted by: "pat ladd" > > My Firestar stalls at 38 or 39 when not in ground effect>> > > Hi All, > > I am a bit surprised that anyone knows the stalling speed when low > enough > to be in ground effect. I don`t think I have ever looked at the > ASI after > coming `over the hedge` and certainly not after the round out. > Surely at that part of the landing you should be looking at `the > picture` > through the windscreen, keeping wings level and `feeling` for the > ground, > not looking at instruments. > > Cheers > > Pat > > > -- > > ________________________________ Message 10 ____________________________________ Time: 07:10:29 AM PST US From: robert bean Subject: Re: Kolb-List: Re: q --> Kolb-List message posted by: robert bean I not only do a full range to stop check on the controls but also note which direction they go. True it would be pretty hard to reverse the aileron rods on a Kolb. -Reason for my "paranoia" was several years ago asking about the wrecked Cessna 195 out back of an airport maint shack. The aileron control wires had been done backwards and the pilot did a slow roll on takeoff. Replaying what that guy must have experienced in my mind never left me. -BB do not archive On 14, Jan 2006, at 2:37 AM, Ed Chmielewski wrote: > --> Kolb-List message posted by: "Ed Chmielewski" > > ========================= > > ________________________________ Message 11 ____________________________________ Time: 07:26:34 AM PST US From: ray anderson Subject: Re: Kolb-List: q --> Kolb-List message posted by: ray anderson During WW2 I saw a C48 on take off, towing two troop gliders, nose up, way up, as the wheels just left the ground. Had left the gust lock on the elevators. Nosed back down and exploded. Not a pretty sight. A simple back and forth check of the controls would have caught it. Ray ....Tenn. UltraStar Do not archive russ kinne wrote: --> Kolb-List message posted by: russ kinne It was at LGA, there were I think 61 killed. I knew one of them slightly. do not archive On Jan 13, 2006, at 8:55 PM, Ed Chmielewski wrote: > --> Kolb-List message posted by: "Ed Chmielewski" > > > Hi Pat/Russ/All, > > That very accident is why I and many other pilots I know do > repeated > control checks, right to the stops (no 'wigglin'). Can't be too > careful > when leaving the ground. > I read that an aviation writer, may have been Bob Buck, > witnessed > the accident at the end of a trip. IIRC, the crew was > repositioning (5 or 6 > killed?). > > Ed in JXN(MI) > MkII/503 > > Do not archive. > > > ----- Original Message ----- > From: "pat ladd" > To: > Sent: Friday, January 13, 2006 4:15 PM > Subject: Re: Kolb-List: q > > >> --> Kolb-List message posted by: "pat ladd" >> >> Years ago at LGA a DC-9 (?) crashed >> because a rock had blown into the elevator-hinge when the pilot ran >> up his engines; locked the elevators >> >> >> Hi Russ, >> >> What are the odds of that happening again? If we all operated on >> the basis >> of all those million to one chances we would all stay in bed. >> That kind of thinking is being pushed by the hundreds of Health >> and Safety >> Inspectors that swarm over the country wasting every ones time >> trying to >> guard against zillion to one risks. > > --------------------------------- Got holiday prints? See all the ways to get quality prints in your hands ASAP. ________________________________ Message 12 ____________________________________ Time: 07:31:10 AM PST US Subject: Kolb-List: Re: q From: "JetPilot" --> Kolb-List message posted by: "JetPilot" Im not at all familiar with the accident you guys are talking about. I would be interested to read a report on it though if anyone knows what year, or what airline it happened to so I can search for it on google. There is no engine runup on jet airliners before takeoff, no airline does it. Running up an engine on a commercial airliner is so hazardous, that you need to get special permission from the tower to do it, as it could cause major damage to any other airplane behind you. On a DC 9, the tail is far above and almost over the engine exaust, there is just no way engine thrust is just not going to blow a rock into it. If one did get in there, I would think it would have to be on takeoff roll. What does throw things into the tail and engines on the DC 9 are the main gear, and nosewheels when the plane is going fast. -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3881#3881 ________________________________ Message 13 ____________________________________ Time: 07:59:29 AM PST US From: ray anderson Subject: Re: Kolb-List: nuts and bolts --> Kolb-List message posted by: ray anderson I too have used 'nylocks' since WW2. The antiquated rules about no nylocks on moving joints started before the nuts all had a nylon insert. If you are as old as I, you will remember the first ones had a fiber material insert. These could truly only be used one time and there was no 'sticky' grasp as with the nylon inserts, which will continue to grab after many, many removals. Not so with the first fiber insert nuts. I can understand the possibility of continued turning forces starting those nuts to slowly unwind. The rule should be updated to reflect modern materials, but FAA wheels turn slowly. Don't believe I've seen any of the fiber ones in many years, although I still have some in my parts cans. Ray UltraStar do not archive Edward Steuber wrote: --> Kolb-List message posted by: "Edward Steuber" You guys are correct about the turning bolts versus the compression bolts. The nylocs are suppose to be used in a non heat environment and metal locks used in "high" heat areas. And I mean HIGH HEAT areas like exhausts. You can correct me if I am wrong (and I know you will) but on a few engines ( P&W R-985 comes to mind) the thing is literally put together with Nylocs everywhere. I have been operating and maintaining these engines for 32 years cropdusting and I have never seen a Nyloc (big or small) lose its locking ability from heat...or melt out the Nyloc material. So when someone tells you ..no nylocs forward of the firewall , there are exceptions .......and in this case some very big ones....... Anybody know why every P&W overhaul shop in the country does this ? ....What's the basis for approval ? When I am working on standard category aircraft I follow all the "rules"..... but on my Ultralights (non N numbered) I do what's "necessary" ... Enquiring ED in Western NY --------------------------------- Photo Books. You design it and well bind it! ________________________________ Message 14 ____________________________________ Time: 08:04:39 AM PST US Subject: Kolb-List: Re: Stall speed / GPS From: "JetPilot" --> Kolb-List message posted by: "JetPilot" kinnepix(at)earthlink.net wrote: > Pat > That's what that cute sexy little blonde passenger is for! Let her do > the looking -- > Russ > My thoughts exactly, you beat me to it :D -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3889#3889 ________________________________ Message 15 ____________________________________ Time: 08:13:17 AM PST US From: "J W Hauck" Subject: Kolb-List: DC-9 --> Kolb-List message posted by: "J W Hauck" http://www.airdisaster.com/cgi-bin/aircraft_detail.cgi?aircraft=McDonnell+Douglas+DC-9 ________________________________ Message 16 ____________________________________ Time: 09:39:59 AM PST US From: Mike Pierzina Subject: Kolb-List: Transponder "Cert" question --> Kolb-List message posted by: Mike Pierzina Hey Guys, I just had a "FLASH" ( not a HOT one ) My Transponder still hasn't been certified....I have to steer clear until it is..... I have my "Repairmans Cert" for my bird.... Here's the question ( if you don't know.....Why answer ? ) Could I fly in an area where the transponder and encoding Alt is not required.....ask a TOWER what "Alt"info they are getting on their screen to cross check if that's my Alt , and ask them if they are recieving my transponder signal OK.....and "sign off" the transponder MYSELF.... Now, if it's not correct, I'd probly have to get it Certified by somebody who knew what they were doing.... But, after two years, with this same proceedure could "I" sign off the RE: Cert Gotta Fly... Mike in MN PS..... John, Your still my Hero ! . . . . . Firestar I&II Forum http://groups.yahoo.com/group/Kolb_Firestar/ My Web Site: http://www.geocities.com/planecrazzzy/Planecrazzzy.html Sometimes you just have to take the leap and build your wings on the way down... --------------------------------- Got holiday prints? See all the ways to get quality prints in your hands ASAP. ________________________________ Message 17 ____________________________________ Time: 10:51:44 AM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "JetPilot" --> Kolb-List message posted by: "JetPilot" I like your thinking Mike [Idea] -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3926#3926 ________________________________ Message 18 ____________________________________ Time: 11:10:55 AM PST US From: "boyd" Subject: Kolb-List: cotter pins --> Kolb-List message posted by: "boyd" I like the nylon lock nuts vs the drilled with cotter pins. One reason is climbing in and out of the airplane the cotter pins will get caught on clothing and human flesh [Shocked] ++++++++++++ If you are careful to bend the ends of the cotter pins so that the ends fit nicely into the recesses of the castellated nuts. it will not grab clothing or flesh. Boyd ________________________________ Message 19 ____________________________________ Time: 11:10:56 AM PST US From: "boyd" Subject: Kolb-List: kolb washout / trim --> Kolb-List message posted by: "boyd" --> Kolb-List message posted by: "rlaird" The Kolb MkIIIc/912ULS I have has a strong tendency to turn left. The bungee cord does a fair job of countering that, but I'd like to effect a bit more nominal solution. So, I have TWO questions: 1) I'm thinking about adding an aileron trim. Can anyone suggest approaches to doing that, suggest methods/materials, and maybe even details on how to do it. 2) I've been told by at least two people, "oh, check your washout!" as if to say that might solve my strong-left-turning-tendency. And although I have a very general idea what washout is, I would have no idea about how to MEASURE it and then, if were "wrong", how to correct it. Any constructive comments? -- Robert -------- Robert 1 st aileron trim If the plane wants to roll to the left, it would be best to add a trim tab to the bottom trailing edge of the right aileron I built mine one rib bay wide, and it was made of .032 alum. The measurements was, as close as I can remember, wide enough to rivet to the ribs on each end.. and about 3 inch from front to back there was a bend at about the 1 inch mark. The bend was enough so that when the 1 inch side was held flat on the workbench the end of the 2 inch side was about inch off the table top. The 1 inch side was riveted to the bottom of the trailing edge tube and the bottom of the ribs. With the bend pointing down. After trial fitting the trim tab. I put a piece of masking tape across the front edge where the tab touches the fabric, then I ran my fingernail over the edge and cut the tape ( do not use a knife ) when I did the final install I put a small bead of silicone rubber on the tab where it contacted the fabric and the excess squeezed out where the tape was cut. I then wiped the excess off and removed the tape for a no smear installation.. I think I had 1 rivet on the leading edge of the tab in the ribs and 3 or 4 across the trailing edge. After trials you may need to bend the tab more or less. 2 nd. Washout. Washout is a twist in the wing so that the leading edge and trailing edge are not straight in line with each other. to measure you hold a level from the leading edge to the trailing edge of the right wing at the inboard part of the wing. Prop up the tail until the level is level. Then repeat on the outboard end of the wing if the level is still level there is no washout, or washin. Kolb wings should be built straight with no twist.. if there must be an error it is better to have the wing twisted so the leading edge of the outboard part of the wing is lower than the trailing edge. Some aircraft have a 2 or 3 inch twist in the wings this causes the wing tip to be at a lower angle of attack and will stall last, giving aileron authority through a stall now that we have done the right wing, leave the tail where it is and check the left wing the inboard part of the left wing should be level, if not the wing attach fitting may have been drilled incorrectly. Then check the outboard end of the wing. It as well should be level again if there is an error it would be better if the leading edge was lower than the trailing edge. The worst case is if the center of the wings were both level and one wing had the leading edge wing tip high and the other wing leading edge wing tip low If you have any further questions feel free to contact me Boyd Young ________________________________ Message 20 ____________________________________ Time: 11:37:21 AM PST US Subject: Kolb-List: Small video of kolb landing in winter ... From: "Noel" --> Kolb-List message posted by: "Noel" Hello group ! I made my 200th flight in my good old Twinstar Mk II yesterday :D I made a small video of one landing on my camera-phone ... and tought of posting this on the new BBS. This give an idea of flying in winter near Montreal, Canada ... The video quality is quite limited ... but usable if you play it in original size ... (looks quite bad in full screen ...) The visibility was only about 6 miles ... You will need a recent version of the RealPlayer to play the .3GP file. The video size is about 1 Mb and last for 2:08 Nol Bouchard Twinstar MKII [/url] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3941#3941 Attachments: http://forums.matronics.com//files/kolbflight1_163.3gp ________________________________ Message 21 ____________________________________ Time: 11:40:57 AM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "Mike Pierzina" --> Kolb-List message posted by: "Mike Pierzina" Hi, I bought it thru Aircraft Spruce.....It's the Narco 155 Transponder w/AR850 encoding Alt... Total package was around $1,500 bucks.... I'm under Class B, and it's getting BIGGER ( KMSP ) The page of my website with the system is: http://www.geocities.com/planecrazzzy/LSXXIX.html There was a little more to put it in than I thought.....BUT, it wasn't hard Gotta Fly... Mike in MN / N381PM .. .. .. .. .. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3943#3943 ________________________________ Message 22 ____________________________________ Time: 11:43:38 AM PST US From: Richard Pike Subject: Re: Kolb-List: Transponder "Cert" question --> Kolb-List message posted by: Richard Pike If you are in flight and your altimeter has an error, and your Mode C has an error, asking ATC how things are doing really doesn't tell you much, because you have no known constant to work from. You need to work from a known constant. Try this: land at an airport with an approach control, and go to a point on the runway or taxiway where the altitude MSL is known exactly, (it's on the approach plate) then set your altimeter to the barometric pressure on the current ATIS, and then ask ATC what your Mode C readout is. (ground control can read it off the tower BRITE scope) Now you know how accurate your Mode C is, and also know how accurate your altimeter is. If either one is off, you need to go to an avionics shop. Assuming they are good, climb to 5,000' (check current ATIS for the barometric pressure) and ask ATC what your Mode C says, and it agrees - good. Try it again at 10,000' and ask them again, and if it still agrees, you are probably a safe user of the ATC Mode C system. Probably not a legal way of pleasing the paper-pushers (should your log books be examined,) but since you brought it up... Richard Pike MKIII N420P (420ldPoops) FAA ATC (retired) Mike Pierzina wrote: >--> Kolb-List message posted by: Mike Pierzina > >Hey Guys, > I just had a "FLASH" ( not a HOT one ) > > My Transponder still hasn't been certified....I have to steer clear until it is..... > > I have my "Repairmans Cert" for my bird.... > > Here's the question ( if you don't know.....Why answer ? ) > > > Could I fly in an area where the transponder and encoding Alt is not required.....ask a TOWER what "Alt"info they are getting on their screen to cross check if that's my Alt , and ask them if they are recieving my transponder signal OK.....and "sign off" the transponder MYSELF.... > > Now, if it's not correct, I'd probly have to get it Certified by somebody who knew what they were doing.... > > But, after two years, with this same proceedure could "I" sign off the RE: Cert > > > Gotta Fly... > Mike in MN > > > PS..... John, Your still my Hero ! > > . > . > . > . > . > > > > Firestar I&II Forum > http://groups.yahoo.com/group/Kolb_Firestar/ > > > My Web Site: > http://www.geocities.com/planecrazzzy/Planecrazzzy.html > > > Sometimes you just have to take the leap and build your wings on the way down... > > > > >--------------------------------- > Got holiday prints? See all the ways to get quality prints in your hands ASAP. > > > > > > > > > ________________________________ Message 23 ____________________________________ Time: 11:54:07 AM PST US From: Richard Pike Subject: Re: Kolb-List: kolb washout / trim --> Kolb-List message posted by: Richard Pike If you make your trim tab adjustable, then you can set it to level when you have a passenger, and down when you are solo, and have no stick pressure either way. Here's how I did it, crude, but works good. http://www.bcchapel.org/pages/0003/pg6.htm Richard Pike MKIII N420P (420ldPoops) boyd wrote: >--> Kolb-List message posted by: "boyd" > >The Kolb MkIIIc/912ULS I have has a strong tendency to turn left. The >bungee cord >does a fair job of countering that, but I'd like to effect a bit more >nominal >solution. > >So, I have TWO questions: > >1) I'm thinking about adding an aileron trim. Can anyone suggest >approaches to >doing that, suggest methods/materials, and maybe even details on how to do >it. > > ________________________________ Message 24 ____________________________________ Time: 12:26:02 PM PST US From: Charlie England Subject: Re: Kolb-List: Transponder "Cert" question --> Kolb-List message posted by: Charlie England Mike Pierzina wrote: >--> Kolb-List message posted by: Mike Pierzina > >Hey Guys, > I just had a "FLASH" ( not a HOT one ) > > My Transponder still hasn't been certified....I have to steer clear until it is..... > > I have my "Repairmans Cert" for my bird.... > > Here's the question ( if you don't know.....Why answer ? ) > > > Could I fly in an area where the transponder and encoding Alt is not required.....ask a TOWER what "Alt"info they are getting on their screen to cross check if that's my Alt , and ask them if they are recieving my transponder signal OK.....and "sign off" the transponder MYSELF.... > > Now, if it's not correct, I'd probly have to get it Certified by somebody who knew what they were doing.... > > But, after two years, with this same proceedure could "I" sign off the RE: Cert > > > Gotta Fly... > Mike in MN > I'm afraid that's one of the areas where being an experimental doesn't get you a pass on the regs. Logic is probably that if it's not done right, you could tangle with another a/c while under ATC's control. Try the EAA for chapter & verse. Charlie ________________________________ Message 25 ____________________________________ Time: 12:28:17 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "Mike Pierzina" --> Kolb-List message posted by: "Mike Pierzina" > If you are in flight and your altimeter has an error, and your Mode C > has an error, asking ATC how things are doing really doesn't tell you > much, because you have no known constant to work from. You need to work > from a known constant. > > > Hi Richard, > As far as knowing my Altitude, My GPS will give me that... > > But you make a good point to check it's "High & Low"...Thanks > > Gotta Fly... > Mike in MN > > > . > . > . > .. > . > PS I like the way a message is posted "Right away" , before it would take about 45 min .... > . > . > . > .. > . > Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3958#3958 ________________________________ Message 26 ____________________________________ Time: 12:59:42 PM PST US Subject: Kolb-List: Re: Small video of kolb landing in winter ... From: "JetPilot" --> Kolb-List message posted by: "JetPilot" Brrrrrrrrrr, that had to be cold ! What were you using to keep warm ? When my MK III is done, I will be flying all year also. Neat video, thanks for sharing :D Michael A. Bigelow -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3968#3968 ________________________________ Message 27 ____________________________________ Time: 01:14:14 PM PST US From: "flht99reh" Subject: RE: Kolb-List: Small video of kolb landing in winter ... --> Kolb-List message posted by: "flht99reh" You shall fort-with be known as "Iceman"! Could we get some Floridian phone video's on this site soon. I'm freezing here in Ohio and the winds are 35 MPH and the temp is 20. The last thing I need to see is a Walrus flyin, pun intended. Actually quite an impressive video from a cell phone. The good Ralph from Ohio! -----Original Message----- From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list-server@matronics.com] On Behalf Of Noel Sent: Saturday, January 14, 2006 2:37 PM Subject: Kolb-List: Small video of kolb landing in winter ... --> Kolb-List message posted by: "Noel" Hello group ! I made my 200th flight in my good old Twinstar Mk II yesterday :D I made a small video of one landing on my camera-phone ... and tought of posting this on the new BBS. This give an idea of flying in winter near Montreal, Canada ... The video quality is quite limited ... but usable if you play it in original size ... (looks quite bad in full screen ...) The visibility was only about 6 miles ... You will need a recent version of the RealPlayer to play the .3GP file. The video size is about 1 Mb and last for 2:08 Nol Bouchard Twinstar MKII [/url] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3941#3941 Attachments: http://forums.matronics.com//files/kolbflight1_163.3gp ________________________________ Message 28 ____________________________________ Time: 01:33:38 PM PST US From: "Ed Chmielewski" Subject: Re: Kolb-List: Transponder "Cert" question --> Kolb-List message posted by: "Ed Chmielewski" Hi Mike, My avionics guy says you have to be certified to make a log entry on the pressure instruments, avionics, etc. Not just any A&P can do it, nor one with a repairman's certificate. I'd leave the log blank and claim innocence, rather than make a questionable entry. Ed in JXN MkII/503 Do not archive. ----- Original Message ----- From: "Charlie England" Sent: Saturday, January 14, 2006 3:25 PM Subject: Re: Kolb-List: Transponder "Cert" question > --> Kolb-List message posted by: Charlie England > > Mike Pierzina wrote: > >>--> Kolb-List message posted by: Mike Pierzina >> >>Hey Guys, >> I just had a "FLASH" ( not a HOT one ) >> >> My Transponder still hasn't been certified....I have to steer clear >> until it is..... >> >> I have my "Repairmans Cert" for my bird.... >> >> Here's the question ( if you don't know.....Why answer ? ) >> >> >> Could I fly in an area where the transponder and encoding Alt is not >> required.....ask a TOWER what "Alt"info they are getting on their screen >> to cross check if that's my Alt , and ask them if they are recieving my >> transponder signal OK.....and "sign off" the transponder MYSELF.... >> >> Now, if it's not correct, I'd probly have to get it Certified by >> somebody who knew what they were doing.... >> >> But, after two years, with this same proceedure could "I" sign off the >> RE: Cert >> >> >> Gotta Fly... >> >> Mike in MN >> > > I'm afraid that's one of the areas where being an experimental doesn't > get you a pass on the regs. Logic is probably that if it's not done > right, you could tangle with another a/c while under ATC's control. > > Try the EAA for chapter & verse. > > Charlie > > > ________________________________ Message 29 ____________________________________ Time: 01:45:47 PM PST US From: Robert Noyer Subject: Re: Kolb-List: Re: Transponder "Cert" question --> Kolb-List message posted by: Robert Noyer It's now 10 years since I've had a tpdr Certified, so stds may have changed. Basically the shop places a box with one side open, and containing an ant. around the ship's beacon ant. The box ant. is connected to a test set via a coax. Tests will cover both Mode A (identication) and Mode C (altitude). You won't have to worry about Mode S...yet. With the tpdr On and set to a given code, the test set transmits an interrogation code train at a known pwr level. The ship's tpdr will detect this interrogation and reply with its code setting. The test set can determine the tpdr's rec. sensitivity, verify its code detection, reply pulse train, and ck its pwr output and frequency. The altitude encoder is ckd by connecting a calibrated pressure source to the coder's input. The set's press. input is varied, and the tpdr's alt. reply is ckd for accuracy...+/- 100'. An additional test covers the IDENT function. Tech makes dated entry in airframe log book. Altho it takes less than hr., charges (use to) run abt $150...EVERY TWO YEARS! I worked on design of first test set in '50...all vacuum tubes...AN- UPM-4. In case anyone is interested (still awake) the Mode C alt replies are folded biquinary for 100's, and Grey binary for 1000's. Somewhere I have a history of IFF/Beacons I wrote almost 50 yrs ago, updated, including solving the Mystery of the Ghost Idents. Bob N. ________________________________ Message 30 ____________________________________ Time: 01:46:13 PM PST US From: "Chris Mallory" Subject: Re: Kolb-List: Small video of kolb landing in winter ... --> Kolb-List message posted by: "Chris Mallory" ----- Original Message ----- From: "flht99reh" Sent: Saturday, January 14, 2006 4:13 PM Subject: RE: Kolb-List: Small video of kolb landing in winter ... > --> Kolb-List message posted by: "flht99reh" > > You shall fort-with be known as "Iceman"! Could we get some Floridian > phone > video's on this site soon. I'm freezing here in Ohio and the winds are 35 > MPH and the temp is 20. The last thing I need to see is a Walrus flyin, > pun > intended. Actually quite an impressive video from a cell phone. > > The good Ralph from Ohio! > > -----Original Message----- > From: owner-kolb-list-server@matronics.com > [mailto:owner-kolb-list-server@matronics.com] On Behalf Of Noel > Sent: Saturday, January 14, 2006 2:37 PM > To: kolb-list@matronics.com > Subject: Kolb-List: Small video of kolb landing in winter ... > > --> Kolb-List message posted by: "Noel" > > Hello group ! > > I made my 200th flight in my good old Twinstar Mk II yesterday :D > I made a small video of one landing on my camera-phone ... and tought > of posting this on the new BBS. > This give an idea of flying in winter near Montreal, Canada ... > > The video quality is quite limited ... but usable if you play it in > original > size ... > (looks quite bad in full screen ...) > The visibility was only about 6 miles ... > > You will need a recent version of the RealPlayer to play the .3GP file. > The video size is about 1 Mb and last for 2:08 > > Nol Bouchard > Twinstar MKII > [/url] > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=3941#3941 > > > Attachments: > > http://forums.matronics.com//files/kolbflight1_163.3gp > > > ________________________________ Message 31 ____________________________________ Time: 01:50:28 PM PST US From: "Chris Mallory" Subject: Re: Kolb-List: Small video of kolb landing in winter ... --> Kolb-List message posted by: "Chris Mallory" Ralph, George Alexander and I went flying Thursday at Manatee (south side of Tampa Bay), started out in long sleeves finished in Tee shirts. Not bad for a January day. Chris Mallory don not archive ----- Original Message ----- From: "flht99reh" Sent: Saturday, January 14, 2006 4:13 PM Subject: RE: Kolb-List: Small video of kolb landing in winter ... > --> Kolb-List message posted by: "flht99reh" > > You shall fort-with be known as "Iceman"! Could we get some Floridian > phone > video's on this site soon. I'm freezing here in Ohio and the winds are 35 > MPH and the temp is 20. The last thing I need to see is a Walrus flyin, > pun > intended. Actually quite an impressive video from a cell phone. > > The good Ralph from Ohio! > > -----Original Message----- > From: owner-kolb-list-server@matronics.com > [mailto:owner-kolb-list-server@matronics.com] On Behalf Of Noel > Sent: Saturday, January 14, 2006 2:37 PM > To: kolb-list@matronics.com > Subject: Kolb-List: Small video of kolb landing in winter ... > > --> Kolb-List message posted by: "Noel" > > Hello group ! > > I made my 200th flight in my good old Twinstar Mk II yesterday :D > I made a small video of one landing on my camera-phone ... and tought > of posting this on the new BBS. > This give an idea of flying in winter near Montreal, Canada ... > > The video quality is quite limited ... but usable if you play it in > original > size ... > (looks quite bad in full screen ...) > The visibility was only about 6 miles ... > > You will need a recent version of the RealPlayer to play the .3GP file. > The video size is about 1 Mb and last for 2:08 > > Nol Bouchard > Twinstar MKII > [/url] > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=3941#3941 > > > Attachments: > > http://forums.matronics.com//files/kolbflight1_163.3gp > > > ________________________________ Message 32 ____________________________________ Time: 02:51:00 PM PST US From: Mike Schnabel Subject: Re: Kolb-List: Small video of kolb landing in winter ... --> Kolb-List message posted by: Mike Schnabel Noel, congrats on the 200th flight! Neat video, i was chillin' just watching, it must have been cold! do not archive Noel wrote: --> Kolb-List message posted by: "Noel" Hello group ! I made my 200th flight in my good old Twinstar Mk II yesterday :D I made a small video of one landing on my camera-phone ... and tought of posting this on the new BBS. This give an idea of flying in winter near Montreal, Canada ... The video quality is quite limited ... but usable if you play it in original size ... (looks quite bad in full screen ...) The visibility was only about 6 miles ... You will need a recent version of the RealPlayer to play the .3GP file. The video size is about 1 Mb and last for 2:08 Nol Bouchard Twinstar MKII [/url] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3941#3941 Attachments: http://forums.matronics.com//files/kolbflight1_163.3gp --------------------------------- Got holiday prints? See all the ways to get quality prints in your hands ASAP. ________________________________ Message 33 ____________________________________ Time: 03:37:31 PM PST US Subject: Kolb-List: Re: Small video of kolb landing in winter ... From: "John Hauck" --> Kolb-List message posted by: "John Hauck" [quote="Noel"] I made my 200th flight in my good old Twinstar Mk II yesterday :D This give an idea of flying in winter near Montreal, Canada ... Hi Noel: Super video!!! Got me all charged up sitting here in the warmth of my old lake house watching it. Makes me want to get the old MKIII out and go flying. Particularly liked the flight on base, turn to final and the landing. Looked like the snow groomer had the day off today at the airstrip. Where is your airstrip located? I'd like to fly through there some day. I have flown north of Montreal, back in 1994, on the way around the States, but it did not look anything like your video. Was a lot greener. ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=3997#3997 ________________________________ Message 34 ____________________________________ Time: 03:42:22 PM PST US Subject: Kolb-List: Re: DC-9 From: "John Hauck" --> Kolb-List message posted by: "John Hauck" Anybody find the particular "stone in the elevator" accident in the URL Bro Jim provided??? He couldn't find it and I haven't had a chance to scan all of them, yet.......... -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4000#4000 ________________________________ Message 35 ____________________________________ Time: 03:43:03 PM PST US Subject: Kolb-List: Re: nuts n bolts From: "Don G" --> Kolb-List message posted by: "Don G" Petty... HEHe...you ha dme laughing on this one pard...and I know it doesnt make alot of sense... snip.....""" Just for the hell of it if any of you care to take time, explain the 3 washer deal. So you wont think""" the 3 washers are so you can get the required 3 threads if the bolt is too long... In true gov fashion....they have never told us why 5 threads are not as good as 3...but they have told us we can washer it up to get to their requirement...I remember when I learned this back in school....made me laugh then too! -------- Don G FireFly#098 http://www.geocities.com/dagger369th/my_firefly.htm Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4001#4001 ________________________________ Message 36 ____________________________________ Time: 03:53:30 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "John Hauck" --> Kolb-List message posted by: "John Hauck" [quote="Mike Pierzina"]Hi Richard, As far as knowing my Altitude, My GPS will give me that... Mike: Might not be a good idea to depend on GPS altitude read out. From my limited experience with GPS altitude, it ain't so accurate. Everything else works good though. -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4004#4004 ________________________________ Message 37 ____________________________________ Time: 04:11:38 PM PST US From: owner-kolb-list-server@matronics.com Subject: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: From: "JetPilot" X-Generated-By: M2F: m2f.sourceforge.net With all the people using vortex generators out there, I was hoping to get a little more information. It seems that I definately want them, so what I need to know now is which ones are the best. I hear of kits, I see some people make thier own. I just dont know which design of vortex generator works the best. Also, how many should I put on the wing, and what is the best location ? Thanks, Michael A. Bigelow -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4006#4006 ________________________________ Message 38 ____________________________________ Time: 04:27:57 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "Mike Pierzina" --> Kolb-List message posted by: "Mike Pierzina" Thanks Guys, After all the replies, I think there's no way of getting around the "CERT" other than a Certified inspector......( $125 - 250 is what I've seen the price range ) I still gotta learn how to do "THE QUOTE" thingy.....I butchered it pretty bad.....??? Gotta Fly... Mike in MN .. .. .. .. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4011#4011 ________________________________ Message 39 ____________________________________ Time: 04:48:12 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "John Hauck" --> Kolb-List message posted by: "John Hauck" > I still gotta learn how to do "THE QUOTE" thingy.....I butchered it pretty bad.....??? > > Gotta Fly... > Mike in MN > Mike: Me too. Practicing now to see if I have gotten it right this time. -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4019#4019 ________________________________ Message 40 ____________________________________ Time: 04:52:04 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "John Hauck" --> Kolb-List message posted by: "John Hauck" > Mike: Me too. Practicing now to see if I have gotten it right this time. Mike: Highlight and copy what you want to quote. Then click on the "quote" box above the msg box. Paste the reference. Click on the "quote" box again. Drop down a line or two and start your reply. -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4021#4021 ________________________________ Message 41 ____________________________________ Time: 04:56:24 PM PST US From: Mike Schnabel Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: Mike Schnabel Also interested in VGs, Mike has asked all of my questions. I am leaning toward a kit, since i do not have my shop set up at the new house. So far, the most interesting seller is Landshorter.com, but i am interested to hear what the list members opinions are. Thanks in advance for your valued advice! Mike S Manchester TN Firestar 2 503 do not archive owner-kolb-list-server@matronics.com wrote: --> Kolb-List message posted by: From: "JetPilot" X-Generated-By: M2F: m2f.sourceforge.net With all the people using vortex generators out there, I was hoping to get a little more information. It seems that I definately want them, so what I need to know now is which ones are the best. I hear of kits, I see some people make thier own. I just dont know which design of vortex generator works the best. Also, how many should I put on the wing, and what is the best location ? Thanks, Michael A. Bigelow -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4006#4006 --------------------------------- Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever. ________________________________ Message 42 ____________________________________ Time: 05:19:53 PM PST US From: "John Hauck" Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: "John Hauck" | Mike S Hi Mike S/Gang: I haven't put them on my MKIII and have not had a chance to fly a Kolb equipped with vortex generators. I know some aircraft come from the factory with them. I think the Aviat Husky is one of them. Don't think I will try them until I am satisfied the vortex generators do not degrade the excellent stall characteristics of Homer Kolb's wing, nor my present cruise speed. John W already outruns me badly enough with his 912ULS powered Kolbra, and I don't want to be left any further behind than I am now. I have heard from Kolb folks that have them that the gentle stall characteristics of the clean wing is replaced with a sharp stall when equipped with vortex generators. Also some cruise is sacrificed. I am happy with the performance of my MKIII in the standard wing configuration. It gets in and out of my 750 ft grass strip with one or two up with room to spare, even with its poor approach and departure because of obstacles. So.........I'll wait and watch for some good tests results that will convince me I would be doing the right thing by adding them. BTW this is one subject I have never discussed with Homer Kolb. Have no idea of what his thoughts are on them. I have heard he added some more dihedral to his 1985 Original Firestar (OSH UL Grand Champ 1985) when he recently rebuilt it. Haven't heard his thoughts on this change either, but think they were favorable. ________________________________ Message 43 ____________________________________ Time: 05:30:51 PM PST US From: "jdmurr@juno.com" Subject: Re: Kolb-List: 40 mph stall --> Kolb-List message posted by: "jdmurr@juno.com" My Firestar Weighs 355 and I weigh 200. We stall at 35 mph IAS -- "Lloyd McFarlane" wrote: --> Kolb-List message posted by: "Lloyd McFarlane" My Firestar II weighs 415lbs & I weigh 200. I stall at approx. 42mph. Lloyd McFarlane Fullerton, CA My Firestar Weighs 355 and I weigh 200. We stall at 35 mph IAS --"LloydMcFarlane"lrmcf@ix.netcom.comwrote: --Kolb-Listmessagepostedby:"LloydMcFarlane"lrmcf@ix.netcom.com MyFirestarIIweighs415lbsIweigh200.Istallatapprox.42mph. LloydMcFarlane Fullerton,CA ________________________________ Message 44 ____________________________________ Time: 05:32:16 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "Mike Pierzina" --> Kolb-List message posted by: "Mike Pierzina" I keep getting it backwards....lets try this... ( my message was in Blue and the quote wasn't ) After a couple of "Previews" , I'm getting it.... Nice feature... > Highlight and copy what you want to quote. > > Then click on the "quote" box above the msg box. > > Paste the reference. > > Click on the "quote" box again. > > Drop down a line or two and start your reply. > > > Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4033#4033 ________________________________ Message 45 ____________________________________ Time: 05:36:11 PM PST US Subject: Kolb-List: Re: Transponder "Cert" question From: "John Hauck" --> Kolb-List message posted by: "John Hauck" > After a couple of "Previews" , I'm getting it.... Nice feature... Shoot man!!! We be catching on. ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4036#4036 ________________________________ Message 46 ____________________________________ Time: 05:46:53 PM PST US From: "jdmurr@juno.com" Subject: Kolb-List: Mode C Veil Question --> Kolb-List message posted by: "jdmurr@juno.com" What are the regulations for ultralights without transponders regarding being inside the 30mn circle but not in Class B airspace? Thanks! John What are the regulations for ultralights without transponders regarding being inside the 30mn circle but not in Class B airspace? Thanks! John ________________________________ Message 47 ____________________________________ Time: 05:53:37 PM PST US From: Robert Noyer Subject: Re: Kolb-List: Re: DC-9 --> Kolb-List message posted by: Robert Noyer I left no DC-9 unstoned. Bob N. ________________________________ Message 48 ____________________________________ Time: 05:56:50 PM PST US From: Mike Schnabel Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: Mike Schnabel John H, Thanks for your thoughts. I have favored the idea of the VGs only due to my short home strip (not yet flown from) which will have just at 1000' usable field. I dont like the idea of giving up cruise or predictability of the stall break for stall speed, but if i need it to make this strip work, its a concession i feel is worth making. But if "Hauck's Hollar" is only 750, and you land a MKIII (vs my FS2), maybe the 1000' is enough to not worry about the additional efforts for stall speed reduction. Maybe once i get this field disced and leveled i can get you up here for a few test landings for your opinion. Iwould offer a steak and a cold beverage of your choice in exchange! PS: do we still need the do not archive, with the new BBS??? Mike S Manchester TN Firestar 2 503 do not archive John Hauck wrote: --> Kolb-List message posted by: "John Hauck" | Also interested in VGs, Mike has asked all of my questions. | | Mike S Hi Mike S/Gang: I haven't put them on my MKIII and have not had a chance to fly a Kolb equipped with vortex generators. I know some aircraft come from the factory with them. I think the Aviat Husky is one of them. Don't think I will try them until I am satisfied the vortex generators do not degrade the excellent stall characteristics of Homer Kolb's wing, nor my present cruise speed. John W already outruns me badly enough with his 912ULS powered Kolbra, and I don't want to be left any further behind than I am now. I have heard from Kolb folks that have them that the gentle stall characteristics of the clean wing is replaced with a sharp stall when equipped with vortex generators. Also some cruise is sacrificed. I am happy with the performance of my MKIII in the standard wing configuration. It gets in and out of my 750 ft grass strip with one or two up with room to spare, even with its poor approach and departure because of obstacles. So.........I'll wait and watch for some good tests results that will convince me I would be doing the right thing by adding them. BTW this is one subject I have never discussed with Homer Kolb. Have no idea of what his thoughts are on them. I have heard he added some more dihedral to his 1985 Original Firestar (OSH UL Grand Champ 1985) when he recently rebuilt it. Haven't heard his thoughts on this change either, but think they were favorable. --------------------------------- Got holiday prints? See all the ways to get quality prints in your hands ASAP. ________________________________ Message 49 ____________________________________ Time: 06:07:25 PM PST US Subject: Kolb-List: Re: DC-9 From: "John Hauck" --> Kolb-List message posted by: "John Hauck" > left no DC-9 unstoned. Bob N: Well...........after you got all the stones turned, did you find a DC-9 accident caused by one. ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4043#4043 ________________________________ Message 50 ____________________________________ Time: 06:24:26 PM PST US Subject: Kolb-List: Re: VORTEX GENERATORS From: "John Hauck" --> Kolb-List message posted by: "John Hauck" > Maybe once i get this field disced and leveled i can get you up here for a few test landings for your opinion. Iwould offer a steak and a cold beverage of your choice in exchange! > > PS: do we still need the do not archive, with the new BBS??? Hi Mike S: That seems to have become my specialty. Last year, unbeknownst to me, I made the first landing and takeoff on Ken Reeves airstrip over in West Alabama. Did the first landing and takeoff on John Bickham's strip last month. Be glad to come up and see what we can do with yours, especially since you have dangled the steak and cold beverage on a stick in front of my nose. I don't know about "do not archive". I haven't been informed, don't make the rules, and figured I haven't been jumped on, yet. Reckon I'll leave it at that until briefed differently. I am still doing most of my primary List reading on the old email list. Seems more reader friendly to me, but after all, I am very old fashioned and "stuck in my old ways that work for me"!!! ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4046#4046 ________________________________ Message 51 ____________________________________ Time: 06:24:50 PM PST US Subject: Kolb-List: Re: Mode C Veil Question From: "Roger Lee" --> Kolb-List message posted by: "Roger Lee" Hi, Your not allowed inside the mode-c circle without a transponder and alt. encoder. -------- Roger Lee Tucson, Az. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4047#4047 ________________________________ Message 52 ____________________________________ Time: 07:01:57 PM PST US From: Mike Schnabel Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: Mike Schnabel John H, I am also still doing most of my reading on the old mail list, but i do like the look of Matt's new forum. I hope to transition to it soon. But there is a comfort level about the old list thats hard to leave! I will keep you posted about my fields readiness (think that mid summer it will be ready for some action). It would be my honor to have you visit and share a meal, and talk Kolbs. Maybe i can get some of the other TN Kolber's out there to come down too, have a mini Kolb get together! Mike S Manchester TN Firestar 2 503 do not archive John Hauck wrote: --> Kolb-List message posted by: "John Hauck" > Maybe once i get this field disced and leveled i can get you up here for a few test landings for your opinion. Iwould offer a steak and a cold beverage of your choice in exchange! > > PS: do we still need the do not archive, with the new BBS??? Hi Mike S: That seems to have become my specialty. Last year, unbeknownst to me, I made the first landing and takeoff on Ken Reeves airstrip over in West Alabama. Did the first landing and takeoff on John Bickham's strip last month. Be glad to come up and see what we can do with yours, especially since you have dangled the steak and cold beverage on a stick in front of my nose. I don't know about "do not archive". I haven't been informed, don't make the rules, and figured I haven't been jumped on, yet. Reckon I'll leave it at that until briefed differently. I am still doing most of my primary List reading on the old email list. Seems more reader friendly to me, but after all, I am very old fashioned and "stuck in my old ways that work for me"!!! ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4046#4046 --------------------------------- Photo Books. You design it and well bind it! ________________________________ Message 53 ____________________________________ Time: 07:01:57 PM PST US From: "Jack B. Hart" Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: "Jack B. Hart" At 04:11 PM 1/14/06 -0800, you wrote: >--> Kolb-List message posted by: > >From: "JetPilot" >X-Generated-By: M2F: m2f.sourceforge.net >Date: Sat, 14 Jan 2006 16:11:21 -0800 >To: kolb-list@matronics.com > >With all the people using vortex generators out there, I was hoping to get a little more information. > >It seems that I definately want them, so what I need to know now is which ones are the best. I hear of kits, I see some people make thier own. I just dont know which design of vortex generator works the best. > >Also, how many should I put on the wing, and what is the best location ? > >Thanks, > >Michael A. Bigelow > Michael, After experiencing flight with VG's it would be difficult to go back to a FireFly with out them. They enhance aileron effectiveness at slow speeds, which helps greatly during a gusty cross wind take off and/or landing. One does not have to pick up a wing with rudder during slow flight. The FireFly will not break into a clean stall, it will remain nose up and mush and a wing will not drop. I see no down side to them. Yes, there is one down side, the do make it more difficult to wash the wings. They are very easily made from 0.010 inch thick aluminum house flashing. I made my own and I stuck them on with very thin double sided tape. I have been flying with them for five and a half years and none have come loose. How it was done can be seen starting at: http://www.thirdshift.com/jack/firefly/firefly17.html During testing, you may wish to use electrician's tape to hold the VG's in place. When and if you decide you like them, you can go with the double sided tape. I can't prove it, but I believe you will get better performance by placing them on the fabric in between the ribs. During my testing, I temporarily placed VG's on top of all the ribs and then later added VG's in between the ribs. Test flights showed that the FireFly flew off at a lower speed with the most VG's. After I made "good" ones, I installed them only in between the ribs and made test flight. I could tell no difference between them and the previous flight, so I did not mount any on top of the ribs. I believe that as the air passes from the front of the wing that it starts to move a little side ways away from the rib. By placing the VG centered in the space in between the ribs, it boosts the air back out. Try them, you will like them. If by chance you don't you will not have spent more than $10. Jack B. Hart FF004 Winchester, IN ________________________________ Message 54 ____________________________________ Time: 07:30:13 PM PST US From: "Beauford" Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: "Beauford" Brother Bigelow... VG's, eh... How much money and time ya got? Reports seem to be that they all work... some, apparently, are marginally better. Some cost big bucks... these are pretty, precision pieces of artisisan craftsmanship, lovingly cut to be the absolute twin of each of their fellows...finished flawlessly...semi invisible to the casual observer.... placed on the wing with appropriate ceremony and laser precision using state of the art technology, stainless steel jigs and chants... They work ... Some (like mine) are Howard Shackleford's famous specials, cut out of a scrap of aluminum gutter flashing from Home Despot... on the rusty top of an old freezer, in a cloud of Macanudo smoke while consuming multiple gin Martinis.... and subsequently put mostly somewhere on the top part of the wing sometime during daylight hours...(as I recall.....) Ground observers inform me that the airplane now moans softly to itself on downwind, but since I am tuned exclusively to the metallic agony and clatter of the mighty 447, I don't hear the less threatening tones... guess my current bride was right, I really should have used a ruler, or straightedge or something when I glued 'em on... But they work ... Re your question, I reckon the conventional placement wisdom is about one per rib and false rib, with the leading edge of the VG gizmo approximately eleven point nothing inches aft of the wing leading edge.. that's where I recall most Listers said they were getting good results, and that's where I put mine. I concentrated the outboard part of the wing in front of the ailerons...one per each and every rib for six feet...then they got a tad more scarce as I went inboard... (Ran out of flashing, plus I didn't want to get inside the prop arc just in case...). I think I have a grand total of 26 on both sides. The pointy part goes to the front according to most folks, but I was just thinkin', I'll bet a man could get some really energetic vortices by running those puppies the other way... I'll have to ponder that a while... I can report at least a 5 or 6 mph reduction in indicated payoff speed on the firefly at altitude, but that is NOT the primary reason I like them... I fly all approaches at 55 or 60, pretending as if it is going to stall at 45... then let the drag quickly bleed off the speed over the fence ..the biggest VG advantage for me on the short-wing Kolb is the way it behaves in ground effect when completing rounding out the flare from a power-off approach with my flabby 210 lb butt aboard... The VG's improved the feel of bouyancy and reserve lift of the wing down in ground effect... Not exactly dramatic, but noticably better.. One nice thing about 'em... if'n you don't like what is happening and you get a substandard outcome, soak the double-stick tape with a little mineral spirits and peel the suckers off... as soon as the stink evaporates, you'll be back at square one and your close personal associates will be none the wiser.... deny everything...they'll just think you waxed the tops of your wings. Later you can sneak out and try 'em again using a different plan. Bottom line from where I sit... Kolbs be blunt instruments...they pretty much axe-murder the air, as opposed to cleaving cleanly through it... Near as I can tell, once a good Kolb aerodynamic innovation is proven, excesses of finesse at the margins of execution doen't often accrue major additional advantages one way or another after the dust settles. One suspects the entire VG business wraps around that fundamental high drag, high lift Kolb baseline of reality...drag, bugs and gravity always win. IMHO if a man truly craves and seeks the exquisite pain and thrill of walking the edge of life's razor, he needs to go buy a 150 hp Hayabusa motorcycle or seek out and date my first wife, not waste his time fooling around with fine-tuning schemes about how to make 65 mph airplanes into 67 mph airplanes or a 37 mph stall into a 36. Come to think of it, I reckon the VG enterprise falls into the same fascinating overall category as matrimony; it's half art, half guesswork, half experimentation, half engineering, half money, half fun, half what you think you can get away with, and there is some chance of getting maimed or killed trying to make it work. The "fun" is in taking a shot at it... I doubt you'll ever get the "correct" final answer on VG's for your particular situation off the List...there are too many "good" answers... Why not just go try one and adjust fire later based on how well it does...? They all work... ;-) My opinion... Worth what ye paid fer it... Yr Hmbl Svt... Beauford, the aluminum butcher of Brandon FL Toyota Pilot FF #076 Do Not Archive ----- Original Message ----- Subject: Kolb-List: Re: VORTEX GENERATORS > --> Kolb-List message posted by: Michael Bigelow > > From: "JetPilot" <>> To: kolb-list@matronics.com > > With all the people using vortex generators out there, I was hoping to get a little more information. > > It seems that I definately want them, so what I need to know now is which ones are the best. I hear of kits, I see some people make thier own. I just dont know which design of vortex generator works the best. >> Also, how many should I put on the wing, and what is the best location ? > ________________________________ Message 55 ____________________________________ Time: 07:32:52 PM PST US Subject: Kolb-List: Re: DC-9 From: "JetPilot" --> Kolb-List message posted by: "JetPilot" I did not find it either. Being an airline pilot, i am familiar with most modern airline crashes. I go over everyone I can so as not to make the same mistakes others have. I have never heard of one caused by a rock at LGA. But enough people are talking about it to make me wonder. I checked all the crashes on the list, but did not see any caused by a stone either.... Michael A. Bigelow -------- NO FEAR - If you have no fear you did not go as fast as you could have !!! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4054#4054 ________________________________ Message 56 ____________________________________ Time: 07:40:35 PM PST US Subject: Kolb-List: Re: Small video of kolb landing in winter ... From: "Noel" --> Kolb-List message posted by: "Noel" John Hauck wrote: > > Hi Noel: > > Super video!!! ... > > Where is your airstrip located? I'd like to fly through there some day. I have flown north of Montreal, back in 1994, on the way around the States, but it did not look anything like your video. Was a lot greener. ;-) Hello John ! Quite pleased that you liked it [Wink] My airstrip is located north of Montreal, near a small town called Ste-Therese. Here a google satellite map link: [url]http://maps.google.com/maps?q=montreal&hl=en&ll=45.685077,-73.825378&spn=0.266709,0.774536&t=h [/url] The valey of the St-lawrence river is a very nice place to fly around .... especially in winter with it's many frozen river and lake ... By the way there is a (Challenger) flyin in Montebello, Qc, Canada this comming 28th and 29 th of january : Usually many UL planes show up and all are welcome .... Any Kolber interested ... I should go on the Saturday (weather permitting) or Sunday . Flying in winter is not that cold ... provided you have the right clothes. With the enclosed cockpit it is actually much warmer than snowmobiling ;-) The worse part is getting the plane ready especially digging it out of the snow and filling the thanks ... but once you got it done then it's the best flying that you can get !!! The air is so calm and the performances !!! I easily get a climb rate of > 1200 fpm ... which is a 20 % increase in performance ... and nothing beat flying (safely) at 3ft over a frozen lake or river and landing about anywhere you dare to ... My excuses for the long post ... Nol [/url] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4057#4057 ________________________________ Message 57 ____________________________________ Time: 07:44:16 PM PST US From: Charlie England Subject: Re: Kolb-List: Re: Mode C Veil Question --> Kolb-List message posted by: Charlie England Roger Lee wrote: >--> Kolb-List message posted by: "Roger Lee" > >Hi, > >Your not allowed inside the mode-c circle without a transponder and alt. encoder. > >-------- >Roger Lee >Tucson, Az. > Things may have changed since 911 enabled the storm troopers, but there once was an exception for planes without an electrical system that can support a transponder. This was interpreted to mean that you can have electrical power but not enough generator power to keep your battery up while the transponder & all other equipment is operating. You could probably make a strong case that a 2stroke with only a 'lighting coil' fit that description. Piper Cubs, Taylorcraft, etc have flown inside the veil regularly in the past. You still had to stay out of the actual B airspace, of course. A call to your ATC (or better yet, a call to EAA's info line) would get you current info. Charlie ________________________________ Message 58 ____________________________________ Time: 07:48:13 PM PST US Subject: Kolb-List: Re: Small video of kolb landing in winter ... From: "Noel" --> Kolb-List message posted by: "Noel" Sorry the map link for Montebello was wrong ... and here is a link to the flyin site: Nol Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4060#4060 ________________________________ Message 59 ____________________________________ Time: 07:56:39 PM PST US From: "Larry Cottrell" Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: "Larry Cottrell" ----- Original Message ----- From: "John Hauck" Sent: Saturday, January 14, 2006 5:19 PM Subject: Re: Kolb-List: Re: VORTEX GENERATORS > > Don't think I will try them until I am satisfied the vortex generators > do not degrade the excellent stall characteristics of Homer Kolb's > wing, nor my present cruise speed. OK John, when I see you at the Alvord or nearby You are going to have to bite the bullet and fly my firestar. If you remember you refused last year, and I understood your reasons, I myself am hinky about flying someone elses plane, but only this way will you be able to understand the difference. I am pretty sure that you will be able to get it back on the ground safely. :-) I have heard from Kolb folks that have > them that the gentle stall characteristics of the clean wing is > replaced with a sharp stall when equipped with vortex generators. Mule muffins! The break without is a hell of a lot more exciting than with the VG's. Mine without, in a full stall, drops nose down sharply and takes a lot more altitude to recover. Larry Oregon ________________________________ Message 60 ____________________________________ Time: 07:56:49 PM PST US From: Richard Pike Subject: Re: Kolb-List: Re: VORTEX GENERATORS --> Kolb-List message posted by: Richard Pike Hey John, next time you get anywhere close to North East Tennessee, you need to take my MKIII and go fly it solo. We went flying in it together, but you know how much better the MKIII flies with that extra seat empty, go take the Old Pooperoo Hauler out for a couple hours, get a few thousand feet under you and stall it every which way you want. The stall is still nice, just a bit different. It won't cruise as fast as yours, but the meager 582 is probably to blame for that, anyway, it wasn't any faster before the VG's. (PS, forget about catching John W's Kolbra, it ain't gonna' happen...) Year before last at the Kolb Fly-In, Homer was very interested in my VG's, took all kinds of notes, but don't know what he about them did after that. Will be curious to see if anything ever comes of it - Richard Pike MKIII N420P (420ldPoops) John Hauck wrote: >--> Kolb-List message posted by: "John Hauck" > >| Mike S > >Hi Mike S/Gang: > >I haven't put them on my MKIII and have not had a chance to fly a Kolb >equipped with vortex generators. I know some aircraft come from the >factory with them. I think the Aviat Husky is one of them. > >Don't think I will try them until I am satisfied the vortex generators >do not degrade the excellent stall characteristics of Homer Kolb's >wing, nor my present cruise speed. John W already outruns me badly >enough with his 912ULS powered Kolbra, and I don't want to be left any >further behind than I am now. I have heard from Kolb folks that have >them that the gentle stall characteristics of the clean wing is >replaced with a sharp stall when equipped with vortex generators. >Also some cruise is sacrificed. > >I am happy with the performance of my MKIII in the standard wing >configuration. It gets in and out of my 750 ft grass strip with one >or two up with room to spare, even with its poor approach and >departure because of obstacles. > >So.........I'll wait and watch for some good tests results that will >convince me I would be doing the right thing by adding them. BTW this >is one subject I have never discussed with Homer Kolb. Have no idea >of what his thoughts are on them. I have heard he added some more >dihedral to his 1985 Original Firestar (OSH UL Grand Champ 1985) when >he recently rebuilt it. Haven't heard his thoughts on this change >either, but think they were favorable. > > > > > > > > > ________________________________ Message 61 ____________________________________ Time: 08:03:49 PM PST US Subject: Kolb-List: Re: Small video of kolb landing in winter ... From: "John Hauck" --> Kolb-List message posted by: "John Hauck" Noel: Thanks for the info on your airstrip and also on the winter flyin. During my 1994 flight I flew from Pembroke to Trois Revierese. During that flight, I was about 40 miles north of St Therese. I landed one time during that 220 leg, but can not remember where. I do remember it was a beautiful area, and enjoyed my flight very much. I'd like to participate in the Winter Flyin, but my southern blood sould freeze up solid. Stay in touch. Maybe I can fly up that way soon, soon as it warms up a bit. Lakes and rivers are not in their normal state when hard enough to walk and land on. ;-) -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4063#4063 ________________________________ Message 62 ____________________________________ Time: 08:08:36 PM PST US From: "frank & margie" Subject: Kolb-List: 2-Stroke vs 4-Stroke --> Kolb-List message posted by: "frank & margie" Ref. the discussion last week on alternative 4 cycle power, go to the Valley Engr/Culver Props site and check it out. (Looks like a Vanguard V-Twin.) 38 HP @ 105 or 117 lbs. www.culverprops.com Frank Clyma do not archive ________________________________ Message 63 ____________________________________ Time: 08:12:35 PM PST US Subject: Kolb-List: Re: VORTEX GENERATORS From: "John Hauck" --> Kolb-List message posted by: "John Hauck" Brother Richard: I appreciate your offer. After reading Brother Bill Tuton's grand post on vortex generators, I ran right out in the cold and dark of night to rip the valley aluminum off the roof. Luckily, before I actually did any ripping, I realized I still have some left from the last time I built a gap seal for my FS. I never throw away anything. One of these days, when I muster up the courage to stick those sticky things all over my wings, and it gets dark enough so no one can see what I am doing, I may try VG's. Not worried about getting the wash rag snagged on them during washing, because that doesn't occur but about one a year. I am interested in the murmur that was reported coming from Bill's FF on downwind. Does your MKIII murmur? Also like to know what kind of murmur it is. Really got my imagination going now. Take care friend, john h -------- John Hauck MKIII/912ULS hauck's holler, alabama Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4067#4067 ________________________________ Message 64 ____________________________________ Time: 08:51:40 PM PST US Subject: Kolb-List: Re: Stall speed / GPS From: "John Jung" --> Kolb-List message posted by: "John Jung" Pat, After 10 years of flying Firestars, I can fly a few feet over the runway, watch the airspeed, and fly by feel, without having to stare at the runway. It is a lot like keeping a car in the lane on the highway while watching the scenery, never staring at the road. It is a really good feeling to have a plane that feels like it is an extension on me. -------- John Jung Firestar II N6163J Surprise, AZ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=4072#4072 ________________________________ Message 65 ____________________________________ Time: 09:17:40 PM PST US From: "Ed Chmielewski" Subject: Re: Kolb-List: Re: DC-9 --> Kolb-List message posted by: "Ed Chmielewski" Hi John/All, That was a great link, they've improved it since I was there last. I couldn't find it either, I thought it was a 707 or DC-8 (non-T-tail aircraft). Only thing listed due to 'jammed elevator' was a DC-7C in 1962. Oh well, may be an urban legend? I did find the one I earlier referenced, it was a NW Orient 727 crash in NY due to lack of pitot heat. Airspeed indicator turned into an altimeter; the more the flight crew raised the nose, the higher the airspeed rose. They kept chasing the airspeed until it stalled. Crew of 3 were lost. A very interesting one was a Yugoslav DC-9 that suffered a bombing and broke up in flight on 26 Jan. 1972. 27 of the 28 on board were lost. A flight attendant survived the ride from FL330 in the tail section. To keep it Kolbish, my MkII is cold here in Michigan. Ed in JXN MkII/503 Do not archive. ----- Original Message ----- From: "John Hauck" Sent: Saturday, January 14, 2006 6:41 PM Subject: Kolb-List: Re: DC-9 > --> Kolb-List message posted by: "John Hauck" > > Anybody find the particular "stone in the elevator" accident in the URL > Bro Jim provided??? He couldn't find it and I haven't had a chance to > scan all of them, yet.......... > > -------- > John Hauck > MKIII/912ULS > hauck's holler, alabama > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=4000#4000 ________________________________ Message 66 ____________________________________ Time: 10:51:44 PM PST US From: WhiskeyVictor36@aol.com Subject: Re: Kolb-List: nuts n bolts TRICK --> Kolb-List message posted by: WhiskeyVictor36@aol.com In a message dated 1/13/2006 10:04:12 AM Eastern Standard Time, lynnp@g-gate.net writes: the control stick bolt. AN-4-7 (I think) is to short to get the required 3 threads extruding and the next 2 sizes will bottom out before snugging up the connection. Paul Petty/All A good departed friend taught me this very simple trick. If the castelated nut does not snug up enough on the bolt after you line up the cotter pin hole, remove the nut, place the bearing surface of the nut on a flat file and rub generously to remove a small amount of material. You will be surprised how quickly this will permit you to get a more snug fit with the cotter pin hole lined up with the bolt hole. This modification to the nut helps to remove excess play in the stick control mechanisim and other joints. Of course, it will also remove the rust preventative coating, but greasing the assembly will help to prevent any rusting. Bill Varnes Original Kolb FireStar Audubon NJ