---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Wed 07/11/07: 20 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:26 AM - new/old Kolber (Thom Riddle) 2. 07:33 AM - Re: Oshkosh 2007 (Jeff Nelson) 3. 08:22 AM - Re: new/old Kolber (olendorf) 4. 08:28 AM - Re: new/old Kolber (Thom Riddle) 5. 09:21 AM - Vortex Generators - Flight test report. (JetPilot) 6. 10:15 AM - Re: Vortex Generators - Flight test report. (Jeremy Casey) 7. 10:23 AM - Re: Re: new/old Kolber (Dana Hague) 8. 10:25 AM - Re: Vortex Generators - Flight test report. (Richard Pike) 9. 11:01 AM - Re: new/old Kolber (Thom Riddle) 10. 11:01 AM - Re: Vortex Generators - Flight test report. (George Myers) 11. 11:49 AM - Re: Vortex Generators - Flight test report. (Mike Welch) 12. 01:11 PM - Re: new/old Kolber (grabo172) 13. 01:16 PM - Re: Vortex Generators - Flight test report. (russ kinne) 14. 02:46 PM - Re: Oshkosh 2007 (WillUribe@aol.com) 15. 03:02 PM - Control Surface Hinges (JRatcli256@AOL.COM) 16. 03:45 PM - Re: Re: Oshkosh 2007 (John Hauck) 17. 03:52 PM - Re: Control Surface Hinges (John Hauck) 18. 04:35 PM - Re: Control Surface Hinges (planecrazzzy) 19. 07:52 PM - VW Update (Richard & Martha Neilsen) 20. 09:08 PM - firestar prop size? (flymichigan@comcast.net) ________________________________ Message 1 _____________________________________ Time: 07:26:33 AM PST US Subject: Kolb-List: new/old Kolber From: "Thom Riddle" Fellow Kolbers, After attending Homer's fly-in I could not resist the temptation to get a Kolb, again. I bought the early Firestar from Erik Grabowski that he bought from Bryan Green who rebuilt it when he bought it from who-knows-who. I also bought the trailer/mobile hangar, which I will no longer need after delivering the FS to our hangar. So, I will have a Kolb hauling enclosed trailer for sale very soon. When I do, I'll post specs etc. For those who have not seen it, a photo is attached. -------- Thom in Buffalo N197BG FS1/447 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123230#123230 Attachments: http://forums.matronics.com//files/197bg_rt_frnt_qrtr_197.jpg ________________________________ Message 2 _____________________________________ Time: 07:33:31 AM PST US From: "Jeff Nelson" Subject: Kolb-List: Re: Oshkosh 2007 Hi All Anyone flying to Oshkosh from the South West and need a stop I am located at Morey Field (C29) and would be glad to help get fuel or anything else you might need. We have two gas stations here that do not have alcohol in their gas. It would be a good last stop because of its location from Oshkosh. I am still working on my Kolb so I will not be flying to Oshkosh but will be up there in my motor home but won't leave until the 27th. I will leave my Cell number if you need to get a hold of me. Thanks Jeff Nelson (608) 334-4989 Cell Kolb FS KXP N1655E Do Not Archive _________________________________________________________________ http://im.live.com/messenger/im/home/?source=hmtextlinkjuly07 ________________________________ Message 3 _____________________________________ Time: 08:22:43 AM PST US Subject: Kolb-List: Re: new/old Kolber From: "olendorf" Welcome back to the good side Thom. That looks like a nice plane. We should meet up somewhere in the middle of the state some time. -------- Scott Olendorf Original Firestar, Rotax 447, Powerfin prop Schenectady, NY http://KolbFirestar.googlepages.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123239#123239 ________________________________ Message 4 _____________________________________ Time: 08:28:53 AM PST US Subject: Kolb-List: Re: new/old Kolber From: "Thom Riddle" Scott, I first have to build an tail dolly for moving it around in the hangar behind the Allegro. I'll have to fold and unfold the wings at each flight so I'm planning on designing a dolly that will hold the wings such the the wing tips are above the flying wires on the tail so I won't have to fold the tail with each flight. At any rate, once I get used to the FS again, I'll give you a holler. Maybe you and Bob Bean and Bob Erb and other Kolbers and I can make a little Kolb reunion flight somewhere in the mid-upstate area. -------- Thom in Buffalo N197BG FS1/447 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123240#123240 ________________________________ Message 5 _____________________________________ Time: 09:21:48 AM PST US Subject: Kolb-List: Vortex Generators - Flight test report. From: "JetPilot" I put Vortex Generators on my Kolb MK III Xtra. I did not want to post just a first impression so I have flown with them for about a months so that I had a chance to really try them out in a lot of different conditions. The VG's have made a different airplane out of the MK III, not just in terms of reducing the stall speed, but in the feel of the plane at lower speeds. It used to feel like an approach speed of 60 MPH was needed to have a good margain of safety and control. Now, 40 on approach feels fine, although I use 50 minimum as a safety factor. Stalls occour at 26 indicated, the plane is not really going this slow, as the GPS shows mid 30's stall with no flaps. I have the traditional seperate flaps and ailerons, and Stalling with flaps seems to be at the same speed as stalling without them, mid 30's. The stall is really a non event, the plane shakes 1/2 second before the nose falls a few degrees nose down, Its so mild that I have a hard time calling it a stall. Full aileron control is maintained throughout the stall, if a wing starts to drop anytime in the stall, a medium amout of aileron input immidately corrects it. I was teaching my wife stalls and of course her first reaction was to jerk the stick back as soon as the nose fell, she abruptly pulled the plane level at 33 indicated a couple times and never got a secondary stall. Yesterday evening, I wanted to see if I could really fly an approach at a very low airspeed, so I went to 2000 feet, went to idle power slowed down to 35 MPH indicated, and put in a huge amount of aileron, banked 45 degrees and roughly jerked the plane around like an idiot, but was not able to get an accelerated stall or felt like I was about to lose it. Landings were a real problem at first, I was in the habbit of landing with no flaps, and with the VG's the plane started to bounce badly on every landing no matter how smooth the touchdown. The airplane would touch down, but there was still enough lift being generated that it would fly again, even with a perfect three point landing... It was worse with a wheels landing. Landing with one notch of flaps totally cured this, im guessing that it pitches the nose down enough that it does not tend to pitch up on a wheels landing, and its going slow enough on a 3 point landing not to fly again. Now I land with flaps every time. The down side is that it cost me some speed, im not sure exactly how much as a changed props at the same time I added the VG's, I lost 8 MPH in cruise with the prop change and VG installation. Im guessing at least 5 of that is VG related. I put the VG 's on with double sided automotive trim tape so that I could take them off if I ever wanted to. Overall im so happy with the way the MK-III flys and feels at slow speeds with VG's, I am more than happy to cruise a bit slower. I used 140 VG's spaced at 2.5 inches apart from the center out to the wingtips. The VG's are in pairs and centered in the valleys of the ribs and face the airstream at a 15 degree angle, and placed at 10 % of the chord of the wing. Attached is a picture of the VG's on the wing, and my panel flying level with 3500 RPM just above stall. Mike Bigelow MK III Xtra 912-S -------- "NO FEAR" - If you have no fear you did not go as fast as you could have !!! Kolb MK-III Xtra, 912-S Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123249#123249 Attachments: http://forums.matronics.com//files/kolbmkiiivortexgenerators_208.jpg http://forums.matronics.com//files/kolbmkiiipanelinflight_190.jpg ________________________________ Message 6 _____________________________________ Time: 10:15:06 AM PST US From: "Jeremy Casey" <1planeguy@kilocharlie.us> Subject: RE: Kolb-List: Vortex Generators - Flight test report. Might want to rethink the prop change...having flown 2 different RANS S7's with and without VG's and communicating with several that had flown them on Challengers, you're the first I've heard of actually losing cruise speed. A couple of folks thought "maybe a MPH or 2" but really hard to tell. Personally I could not tell any lose of cruise speed. Read an article in Sport Aviation long time ago about a guy that tested VG's on an RV-6 with an articulating pitot-static test boom and everything and got somewhere around 4-5MPH loss...but that was on a 200MPH airplane, so go figure. Your still a good advocate for the VG's...even thinking that the VG's cost you that much cruise speed you were impressed enough with the slow end improvement to leave them on...that says it all. I'd bet a crisp $5 bill that swapping back to the original prop will show the VG's to not have cost you much (if any) on the cruise end... Jeremy Casey The down side is that it cost me some speed, im not sure exactly how much as a changed props at the same time I added the VG's, I lost 8 MPH in cruise with the prop change and VG installation. Im guessing at least 5 of that is VG related. I put the VG 's on with double sided automotive trim tape so that I could take them off if I ever wanted to. Overall im so happy with the way the MK-III flys and feels at slow speeds with VG's, I am more than happy to cruise a bit slower. I used 140 VG's spaced at 2.5 inches apart from the center out to the wingtips. The VG's are in pairs and centered in the valleys of the ribs and face the airstream at a 15 degree angle, and placed at 10 % of the chord of the wing. Attached is a picture of the VG's on the wing, and my panel flying level with 3500 RPM just above stall. Mike Bigelow ________________________________ Message 7 _____________________________________ Time: 10:23:58 AM PST US From: Dana Hague Subject: Re: Kolb-List: Re: new/old Kolber At 11:28 AM 7/11/2007, Thom Riddle wrote: > >Scott, > >I first have to build an tail dolly for moving it around in the hangar >behind the Allegro. I'll have to fold and unfold the wings at each flight >so I'm planning on designing a dolly that will hold the wings such the the >wing tips are above the flying wires on the tail so I won't have to fold >the tail with each flight... I LIKE that idea! Gotta see if I can do something like that for my US, if I end up sharing a hangar instead of keeping it in the trailer. 'Course on the US I'd have to partially fold the wings, keeping them outboard of the stabilizer, but same idea. -Dana -- -- The only correct outcome to an armed robbery attempt is a dead armed robber. ________________________________ Message 8 _____________________________________ Time: 10:25:41 AM PST US From: "Richard Pike" Subject: Re: Kolb-List: Vortex Generators - Flight test report. I'll see your five and raise you five... $10 says it's not the VG's. (Bad Preacher, No, No!) Richard Pike MKIII N420P (420ldPoops) do not archive ----- Original Message ----- From: "Jeremy Casey" <1planeguy@kilocharlie.us> Sent: Wednesday, July 11, 2007 1:14 PM Subject: RE: Kolb-List: Vortex Generators - Flight test report. > > Might want to rethink the prop change...having flown 2 different RANS > S7's with and without VG's and communicating with several that had flown > them on Challengers, you're the first I've heard of actually losing > cruise speed. I'd bet a crisp $5 > bill that swapping back to the original prop will show the VG's to not > have cost you much (if any) on the cruise end... > > Jeremy Casey > ________________________________ Message 9 _____________________________________ Time: 11:01:42 AM PST US Subject: Kolb-List: Re: new/old Kolber From: "Thom Riddle" Dana, The space available to me for the FS precludes leaving the wings low and wide to clear the horizontal stabilizer tips, so I have to tilt them up to keep them within the width of the stabilizer. It should be simple to do and I have a plan in my head. I hope to get it done within a couple days. If it works out well, I'll take some photos and post them. -------- Thom in Buffalo N197BG FS1/447 do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123259#123259 ________________________________ Message 10 ____________________________________ Time: 11:01:42 AM PST US From: "George Myers" Subject: RE: Kolb-List: Vortex Generators - Flight test report. Did anybody see any vortez generators??? :-) > -----Original Message----- > From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list- > server@matronics.com] On Behalf Of JetPilot > Sent: Wednesday, July 11, 2007 11:21 AM > To: kolb-list@matronics.com > Subject: Kolb-List: Vortex Generators - Flight test report. > > > I put Vortex Generators on my Kolb MK III Xtra. I did not want to post > just a first impression so I have flown with them for about a months so > that I had a chance to really try them out in a lot of different > conditions. The VG's have made a different airplane out of the MK III, > not just in terms of reducing the stall speed, but in the feel of the > plane at lower speeds. It used to feel like an approach speed of 60 > MPH was needed to have a good margain of safety and control. Now, 40 > on approach feels fine, although I use 50 minimum as a safety factor. > > Stalls occour at 26 indicated, the plane is not really going this slow, > as the GPS shows mid 30's stall with no flaps. I have the traditional > seperate flaps and ailerons, and Stalling with flaps seems to be at the > same speed as stalling without them, mid 30's. The stall is really a > non event, the plane shakes 1/2 second before the nose falls a few > degrees nose down, Its so mild that I have a hard time calling it a > stall. Full aileron control is maintained throughout the stall, if a > wing starts to drop anytime in the stall, a medium amout of aileron > input immidately corrects it. I was teaching my wife stalls and of > course her first reaction was to jerk the stick back as soon as the > nose fell, she abruptly pulled the plane level at 33 indicated a couple > times and never got a secondary stall. > > Yesterday evening, I wanted to see if I could really fly an approach at > a very low airspeed, so I went to 2000 feet, went to idle power slowed > down to 35 MPH indicated, and put in a huge amount of aileron, banked > 45 degrees and roughly jerked the plane around like an idiot, but was > not able to get an accelerated stall or felt like I was about to lose > it. > > Landings were a real problem at first, I was in the habbit of landing > with no flaps, and with the VG's the plane started to bounce badly on > every landing no matter how smooth the touchdown. The airplane would > touch down, but there was still enough lift being generated that it > would fly again, even with a perfect three point landing... It was > worse with a wheels landing. Landing with one notch of flaps totally > cured this, im guessing that it pitches the nose down enough that it > does not tend to pitch up on a wheels landing, and its going slow > enough on a 3 point landing not to fly again. Now I land with flaps > every time. > > The down side is that it cost me some speed, im not sure exactly how > much as a changed props at the same time I added the VG's, I lost 8 MPH > in cruise with the prop change and VG installation. Im guessing at > least 5 of that is VG related. I put the VG 's on with double sided > automotive trim tape so that I could take them off if I ever wanted to. > Overall im so happy with the way the MK-III flys and feels at slow > speeds with VG's, I am more than happy to cruise a bit slower. > > I used 140 VG's spaced at 2.5 inches apart from the center out to the > wingtips. The VG's are in pairs and centered in the valleys of the > ribs and face the airstream at a 15 degree angle, and placed at 10 % of > the chord of the wing. Attached is a picture of the VG's on the wing, > and my panel flying level with 3500 RPM just above stall. > > Mike Bigelow > > MK III Xtra 912-S > > -------- > "NO FEAR" - If you have no fear you did not go as fast as > you could have !!! > > Kolb MK-III Xtra, 912-S > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=123249#123249 > > > > > Attachments: > > http://forums.matronics.com//files/kolbmkiiivortexgenerators_208.jpg > http://forums.matronics.com//files/kolbmkiiipanelinflight_190.jpg > > > > > > ________________________________ Message 11 ____________________________________ Time: 11:49:43 AM PST US From: "Mike Welch" Subject: RE: Kolb-List: Vortex Generators - Flight test report. Very funny, George. Yeah, what airplane?? Also, notice how Mike mentioned in his email how he had his lovely wife in the plane with him, teaching her stalls, no less!!!! Gosh, should we be so lucky to have our wives support us so!! I think it was a sly way for him to brag about having a real sweetheart of a wife. In case Mr. Mike reads this email, do you have any specs/details of the VG's? Where did you get the design, and how far back from the leading edge are they mounted? Appreciate the info, Mike in SW Utah >From: "George Myers" >To: >Subject: RE: Kolb-List: Vortex Generators - Flight test report. >Date: Wed, 11 Jul 2007 13:00:55 -0500 > > >Did anybody see any vortez generators??? :-) > > > -----Original Message----- > > From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list- > > server@matronics.com] On Behalf Of JetPilot > > Sent: Wednesday, July 11, 2007 11:21 AM > > To: kolb-list@matronics.com > > Subject: Kolb-List: Vortex Generators - Flight test report. > > > > > > I put Vortex Generators on my Kolb MK III Xtra. I did not want to post > > just a first impression so I have flown with them for about a months so > > that I had a chance to really try them out in a lot of different > > conditions. The VG's have made a different airplane out of the MK III, > > not just in terms of reducing the stall speed, but in the feel of the > > plane at lower speeds. It used to feel like an approach speed of 60 > > MPH was needed to have a good margain of safety and control. Now, 40 > > on approach feels fine, although I use 50 minimum as a safety factor. > > > > Stalls occour at 26 indicated, the plane is not really going this slow, > > as the GPS shows mid 30's stall with no flaps. I have the traditional > > seperate flaps and ailerons, and Stalling with flaps seems to be at the > > same speed as stalling without them, mid 30's. The stall is really a > > non event, the plane shakes 1/2 second before the nose falls a few > > degrees nose down, Its so mild that I have a hard time calling it a > > stall. Full aileron control is maintained throughout the stall, if a > > wing starts to drop anytime in the stall, a medium amout of aileron > > input immidately corrects it. I was teaching my wife stalls and of > > course her first reaction was to jerk the stick back as soon as the > > nose fell, she abruptly pulled the plane level at 33 indicated a couple > > times and never got a secondary stall. > > > > Yesterday evening, I wanted to see if I could really fly an approach at > > a very low airspeed, so I went to 2000 feet, went to idle power slowed > > down to 35 MPH indicated, and put in a huge amount of aileron, banked > > 45 degrees and roughly jerked the plane around like an idiot, but was > > not able to get an accelerated stall or felt like I was about to lose > > it. > > > > Landings were a real problem at first, I was in the habbit of landing > > with no flaps, and with the VG's the plane started to bounce badly on > > every landing no matter how smooth the touchdown. The airplane would > > touch down, but there was still enough lift being generated that it > > would fly again, even with a perfect three point landing... It was > > worse with a wheels landing. Landing with one notch of flaps totally > > cured this, im guessing that it pitches the nose down enough that it > > does not tend to pitch up on a wheels landing, and its going slow > > enough on a 3 point landing not to fly again. Now I land with flaps > > every time. > > > > The down side is that it cost me some speed, im not sure exactly how > > much as a changed props at the same time I added the VG's, I lost 8 MPH > > in cruise with the prop change and VG installation. Im guessing at > > least 5 of that is VG related. I put the VG 's on with double sided > > automotive trim tape so that I could take them off if I ever wanted to. > > Overall im so happy with the way the MK-III flys and feels at slow > > speeds with VG's, I am more than happy to cruise a bit slower. > > > > I used 140 VG's spaced at 2.5 inches apart from the center out to the > > wingtips. The VG's are in pairs and centered in the valleys of the > > ribs and face the airstream at a 15 degree angle, and placed at 10 % of > > the chord of the wing. Attached is a picture of the VG's on the wing, > > and my panel flying level with 3500 RPM just above stall. > > > > Mike Bigelow > > > > MK III Xtra 912-S > > > > -------- > > "NO FEAR" - If you have no fear you did not go as fast as > > you could have !!! > > > > Kolb MK-III Xtra, 912-S > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=123249#123249 > > > > > > > > > > Attachments: > > > > http://forums.matronics.com//files/kolbmkiiivortexgenerators_208.jpg > > http://forums.matronics.com//files/kolbmkiiipanelinflight_190.jpg > > > > > > > > > > > > > > _________________________________________________________________ http://liveearth.msn.com ________________________________ Message 12 ____________________________________ Time: 01:11:34 PM PST US Subject: Kolb-List: Re: new/old Kolber From: "grabo172" After a bunch of fuss with the tail light on the trailer I saw my good old N197BG drive away with Thom... Take good care of her! Hope you love it as much as I did! But Time for me to move up... MKIII xtra would be a great find when I get ready for the next plane. -Erik -------- -Erik Grabowski Kolb Firestar N197BG CFI/CFII/LS-I Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123281#123281 ________________________________ Message 13 ____________________________________ Time: 01:16:17 PM PST US From: russ kinne Subject: Re: Kolb-List: Vortex Generators - Flight test report. If you hold a magazine over the left half of the image, you'll see the VG's! do not archive On Jul 11, 2007, at 2:00 PM, George Myers wrote: > > Did anybody see any vortez generators??? :-) > >> -----Original Message----- >> From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list- >> server@matronics.com] On Behalf Of JetPilot >> Sent: Wednesday, July 11, 2007 11:21 AM >> To: kolb-list@matronics.com >> Subject: Kolb-List: Vortex Generators - Flight test report. >> >> >> I put Vortex Generators on my Kolb MK III Xtra. I did not want to >> post >> just a first impression so I have flown with them for about a >> months so >> that I had a chance to really try them out in a lot of different >> conditions. The VG's have made a different airplane out of the MK >> III, >> not just in terms of reducing the stall speed, but in the feel of the >> plane at lower speeds. It used to feel like an approach speed of 60 >> MPH was needed to have a good margain of safety and control. Now, 40 >> on approach feels fine, although I use 50 minimum as a safety factor. >> >> Stalls occour at 26 indicated, the plane is not really going this >> slow, >> as the GPS shows mid 30's stall with no flaps. I have the >> traditional >> seperate flaps and ailerons, and Stalling with flaps seems to be >> at the >> same speed as stalling without them, mid 30's. The stall is really a >> non event, the plane shakes 1/2 second before the nose falls a few >> degrees nose down, Its so mild that I have a hard time calling it a >> stall. Full aileron control is maintained throughout the stall, if a >> wing starts to drop anytime in the stall, a medium amout of aileron >> input immidately corrects it. I was teaching my wife stalls and of >> course her first reaction was to jerk the stick back as soon as the >> nose fell, she abruptly pulled the plane level at 33 indicated a >> couple >> times and never got a secondary stall. >> >> Yesterday evening, I wanted to see if I could really fly an >> approach at >> a very low airspeed, so I went to 2000 feet, went to idle power >> slowed >> down to 35 MPH indicated, and put in a huge amount of aileron, banked >> 45 degrees and roughly jerked the plane around like an idiot, but was >> not able to get an accelerated stall or felt like I was about to lose >> it. >> >> Landings were a real problem at first, I was in the habbit of landing >> with no flaps, and with the VG's the plane started to bounce badly on >> every landing no matter how smooth the touchdown. The airplane would >> touch down, but there was still enough lift being generated that it >> would fly again, even with a perfect three point landing... It was >> worse with a wheels landing. Landing with one notch of flaps totally >> cured this, im guessing that it pitches the nose down enough that it >> does not tend to pitch up on a wheels landing, and its going slow >> enough on a 3 point landing not to fly again. Now I land with flaps >> every time. >> >> The down side is that it cost me some speed, im not sure exactly how >> much as a changed props at the same time I added the VG's, I lost >> 8 MPH >> in cruise with the prop change and VG installation. Im guessing at >> least 5 of that is VG related. I put the VG 's on with double sided >> automotive trim tape so that I could take them off if I ever >> wanted to. >> Overall im so happy with the way the MK-III flys and feels at slow >> speeds with VG's, I am more than happy to cruise a bit slower. >> >> I used 140 VG's spaced at 2.5 inches apart from the center out to the >> wingtips. The VG's are in pairs and centered in the valleys of the >> ribs and face the airstream at a 15 degree angle, and placed at 10 >> % of >> the chord of the wing. Attached is a picture of the VG's on the >> wing, >> and my panel flying level with 3500 RPM just above stall. >> >> Mike Bigelow >> >> MK III Xtra 912-S >> >> -------- >> "NO FEAR" - If you have no fear you did not go as fast as >> you could have !!! >> >> Kolb MK-III Xtra, 912-S >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=123249#123249 >> >> >> >> >> Attachments: >> >> http://forums.matronics.com//files/kolbmkiiivortexgenerators_208.jpg >> http://forums.matronics.com//files/kolbmkiiipanelinflight_190.jpg >> >> >> >> >> >> > > ________________________________ Message 14 ____________________________________ Time: 02:46:31 PM PST US From: WillUribe@aol.com Subject: Kolb-List: Re: Oshkosh 2007 I will be flying in sometime Thursday late or Friday early and depart on Sunday. If work doesn't get in the way again. Does anyone know if the New Kolb gang is going to be at Oshkosh? I didn't see anything on their webpage about Oshkosh. Regards, Will Uribe El Paso, TX FireStar II N4GU _http://home.elp.rr.com/airplane/_ (http://home.elp.rr.com/airplane/) ************************************** Get a sneak peak of the all-new AOL at http://discover.aol.com/memed/aolcom30tour ________________________________ Message 15 ____________________________________ Time: 03:02:58 PM PST US From: JRatcli256@AOL.COM Subject: Kolb-List: Control Surface Hinges Hi again, Time to permanently install my hinges. Have read on other lists about bedding the hinges in Epoxy when riveting them on. This makes since to me because you are installing a flat surface to a rounded surface. By bedding the hinge in Epoxy, the stress is spread out over the whole hinge leaf rather then concentrated at the rivet holes. I'm sure this is overkill ( many kolbs are flying successfully without this, for many years) but still makes since to me. My questions are these: Has anyone else done this? How about inservice results? What kind of Epoxy did you use? Considering using J-B Weld, but discovered it is for steel. Would it be appropriate next to aluminum? Would it rust over time or cause galvanic corrosion? Since the steel fillings are embedded in an Epoxy matrix, would it be an issue at all? All thoughts would be appreciated. John Ratcliffe ************************************** Get a sneak peak of the all-new AOL at http://discover.aol.com/memed/aolcom30tour ________________________________ Message 16 ____________________________________ Time: 03:45:19 PM PST US From: "John Hauck" Subject: Re: Kolb-List: Re: Oshkosh 2007 I didn't | see anything on their webpage about Oshkosh. | | | Regards, | Will Uribe Will: Yes, TNK will be at OSH. Display will be in the main area. Not in the UL area. Travis, how about posting the site number for TNK at OSH? Thanks buddy, john h mkIII DO NOT ARCHIVE ________________________________ Message 17 ____________________________________ Time: 03:52:19 PM PST US From: "John Hauck" Subject: Re: Kolb-List: Control Surface Hinges riveting them | on. | | John Ratcliffe John R: As far as I know, there are no problems with piano hinges departing round tubes on Kolbs. Bedding hinges in epoxy is unnecessary, and will cause a serious problem if you ever have to remove a hinge. I have hinges on my mkIII, installed per the plans and instructions, with well over 2,600 hours flight time on them. Have not had any hinge problems concerning looseness. Curious. Were the other lists you have been reading, reference epoxy bedding of piano hinges, Kolb related/ Take care, john h mkIII ________________________________ Message 18 ____________________________________ Time: 04:35:58 PM PST US Subject: Kolb-List: Re: Control Surface Hinges From: "planecrazzzy" Never heard of that one..... You could probly round the hinge tabs slightly to conform to the tubing... But that sounds like a waste of time too.... One thing alot of the guys change about the hinge area...... Don't "crimp" them.....drill holes & use cotter pins... That way you can take it back apart if you need to... .. .. .. Gotta Fly... Mike & "Jaz" in MN .. .. .. http://www.geocities.com/planecrazzzy/LSVI.html .. .. .. -------- .. .. .. .. .. Do Not Archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123320#123320 ________________________________ Message 19 ____________________________________ Time: 07:52:36 PM PST US From: "Richard & Martha Neilsen" Subject: Kolb-List: VW Update Okay guys. I have a couple of VW updates. First, I have installed and have been test flying my new series three reduction drive. As I reported earlier the new redrive is a serpentine belt drive that slips in one direction at low RPMs and absorbs harmonic pulses at higher RPMs. The VW redrive is smooth throughout all RPM ranges and will even idle smooth down 700 RPM. This is a major improvement over the old redrive. Since there is some slippage there is a more limited life to the belts but there is a wear indicator that shows you when it is time to replace the belts. It isn't known yet what the life is but it is at least a hundred hours. The belt change requires the removal of only one bolt, it is a one inch bolt but there is only one. Second, I've been working with Kolb on behalf of Rick Lewis to have Kolb to produce a VW mount for his Mark IIIX. They now have the production jigs to produce this VW mount for other MKIIIs. Hopefully Rick will keep us up to date on his progress. I also hope he will build a bit faster than Big Lar. Rick Neilsen Redrive VW powered MKIIIC ________________________________ Message 20 ____________________________________ Time: 09:08:49 PM PST US From: flymichigan@comcast.net Subject: Kolb-List: firestar prop size? Hello everyone. Does anyone know the recommended prop size for a Firestar I with a 447. I am not reaching full RPMs. My plane has a wood 66x33 which I am guessing is my problem. Any ideas? Thanks, Bryan Dever ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.