---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sun 01/06/08: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:48 AM - props (tc1917) 2. 09:40 AM - Sport Pilot Article (Richard Girard) 3. 11:22 AM - Re: Sport Pilot Article (Jim ODay) 4. 01:19 PM - Latch for enclosure (Bill Vincent) 5. 01:50 PM - Re: Latch for enclosure (Larry Bourne) 6. 01:56 PM - Re: Latch for enclosure (Larry Bourne) 7. 02:33 PM - Re: Latch for enclosure (Richard Girard) 8. 02:33 PM - Re: Latch for enclosure (Dana Hague) 9. 02:46 PM - PMX visitors (william sullivan) ________________________________ Message 1 _____________________________________ Time: 04:48:52 AM PST US From: "tc1917" Subject: Kolb-List: props Just a heads up. I am selling two props from my 582 that were on my SlingShot. One is the original IVO three blade ground adjust that I installed new three years ago, 64" (Make Offer) and the other is a brand new Warp 66" three blade with shinny new special hub. It doesnt even have any bugs on it yet. Worked absolutely fantastic on the 582. This is what a 582 likes. Will part with it for $750. I changed over to a 912 so I cannot use these props. Ted Cowan, Alabama, 334-480-0822. ________________________________ Message 2 _____________________________________ Time: 09:40:11 AM PST US From: "Richard Girard" Subject: Kolb-List: Sport Pilot Article The Kolb list's own Thom Riddle has an excellent article in the December 2007 "Sport Pilot" magazine on doing a proper engine preflight. Good job, Thom and thanks. I got this issue almost a month late or I would have commented earlier. That'll teach me to wait until the very last day before renewing my EAA membership. Rick ________________________________ Message 3 _____________________________________ Time: 11:22:18 AM PST US Subject: Kolb-List: Re: Sport Pilot Article From: "Jim ODay" Wait till you see the January issue. Another well done piece by Thom. do not archive -------- Jim O'Day Fargo, ND Firestar II Read this topic online here: http://forums.matronics.com/viewtopic.php?p=156385#156385 ________________________________ Message 4 _____________________________________ Time: 01:19:39 PM PST US From: "Bill Vincent" Subject: Kolb-List: Latch for enclosure Hi Gang I took the attached photo at my work place, it is on a FORTE metal band saw; I think it is German built. Does anyone know where I can purchase this spring toggle latch; this latch will work in many different applications. I looked at the FORTE parts list but they have only one size, 6 inches long, which is too big, I also found spring toggles on the web but they are not what I am looking for. I am looking for smaller sizes than the 6 inches. Thank you in advance, Bill Vincent FS II Do Not Archive ________________________________ Message 5 _____________________________________ Time: 01:50:26 PM PST US From: Larry Bourne Subject: Re: Kolb-List: Latch for enclosure ________________________________ Message 6 _____________________________________ Time: 01:56:36 PM PST US From: Larry Bourne Subject: Re: Kolb-List: Latch for enclosure ________________________________ Message 7 _____________________________________ Time: 02:33:03 PM PST US From: "Richard Girard" Subject: Re: Kolb-List: Latch for enclosure Bill, Try McMaster Carr (mcmaster.com) pages 2896-2900. They're listed as draw latches or tension latches. I didn't see one exactly like the picture, but many that perform in the same way. Rick On Jan 6, 2008 3:55 PM, Larry Bourne wrote: > ________________________________ Message 8 _____________________________________ Time: 02:33:03 PM PST US From: Dana Hague Subject: Re: Kolb-List: Latch for enclosure At 04:18 PM 1/6/2008, Bill Vincent wrote: >Hi Gang >I took the attached photo at my work place, it is on a FORTE metal band >saw; I think it is German built. >Does anyone know where I can purchase this spring toggle latch; this latch >will work in many different applications... Have you tried Southco? They sell many different types of latches. -Dana -- 2000 mockingbirds = two kilomockingbirds ________________________________ Message 9 _____________________________________ Time: 02:46:19 PM PST US From: william sullivan Subject: Kolb-List: PMX visitors To those list members who inquired about traveling to PMX in Palmer, Mass., I have been in touch with Ed Harvey, a member of the Silver Wings Ultralight Club based at the now closed PMX airport. The club rents the old airport, and Ed tells me they always welcome visitors. However, the airport only has people around when a member happens to be present. The gate is locked when no one is there. Ed is retired, and goes in there to mow the grass. The paved runway is said to be unusable, and the club uses a 900' grass strip adjacent to the runway. They say it is always open to touch and goes, etc., but if anything is needed a club member should be there to arrange ground transport, gas, etc. Ed can be reached by e-mail at the following address: edharvey1@juno.com Thanks, guys, for the help and support. Hopefully we will have our Kold in about three weeks. Bill Sullivan ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.