Today's Message Index:
----------------------
1. 06:51 AM - powder coating little parts (Mike Welch)
2. 07:58 AM - Re: powder coating little parts (planecrazzzy)
3. 08:20 AM - Re: Re: powder coating little parts (Mike Welch)
4. 08:34 AM - Kolb Envy (knowvne@aol.com)
5. 09:08 AM - Re: Re: powder coating little parts (herb)
6. 10:16 AM - Re: Format style ( Test) (Ron)
7. 10:20 AM - Re: Re: powder coating little parts (Ron)
8. 10:24 AM - Re: Re: FS II perfomance (boyd)
9. 10:33 AM - Re: Kolb Envy (Ron)
10. 11:04 AM - Re: powder coating little parts (JetPilot)
11. 12:14 PM - Re: Re: powder coating little parts (Larry Bourne)
12. 01:01 PM - Poly Spray??? (Kolbdriver)
13. 01:08 PM - Re: Format style ( Test) (ElleryWeld@AOL.COM)
14. 03:25 PM - CAUTION WHEN STARTING ENGINE (Bill Vincent)
15. 03:51 PM - Re: Poly Spray??? (Mike Welch)
16. 04:03 PM - Re: Re: powder coating little parts (Ron)
17. 04:15 PM - Re: Poly Spray??? (Kolbdriver)
18. 04:15 PM - Re: Format style ( Test) (Ron)
19. 05:48 PM - New camera position (possums)
20. 05:59 PM - Re: Format style ( Test) (ElleryWeld@aol.com)
21. 06:01 PM - Re: New camera position (possums)
22. 06:07 PM - Re: New camera position (Bill Vincent)
23. 06:18 PM - Re: New camera position (Dana Hague)
24. 06:41 PM - Re: powder coating little parts (HShack@aol.com)
25. 06:53 PM - Re: New camera position (knowvne@aol.com)
26. 07:12 PM - Re: New camera position (possums)
27. 07:33 PM - Re: New camera position (possums)
28. 07:56 PM - Re: Poly Spray??? (Richard & Martha Neilsen)
29. 08:52 PM - Re: Poly Spray??? (herb)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | powder coating little parts |
Kolb group,
Good morning. I was wondering if anyone has ever tried using one of those inexpensive
"powdercoat at home" things? I have seen them advertized for about $50, and then
you buy the
powder color you want. Thank you for your help.
Dudley
Building a MkIII
Looking for last minute shopping deals?
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
The trick isn't putting it on....it's "curing" it. ( 400 degrees/20 min ? )
You don't wanna use yer house oven.
Gotta Fly...
Mike & "Jaz" in MN - FSII / White Epoxy
.
.
.
--------
.
.
.
.
.
Do Not Archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=167246#167246
Attachments:
http://forums.matronics.com//files/finished_upholstery_141.jpg
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
Nope, don't want to use the wife's house oven, again. Did that with some fiberglass
parts I was trying to cure in a hurry. (non-flying stuff parts...halloween
mask, caught on fire, bad idea, anyway, forget the house oven idea.) Too
much smoke!! (the halloween mask came out kind of scary, with all the burn marks!!)
But, I HAVE heard using a propane grill can work very well. Yes, it WILL get to
400 degrees. And, according to what I heard, the propane's heat is very good
on the powder-paint. Just suspend the pieces, crank it to high, watch the temp
gauge and the timer.
Of course, a guy could pick up a cheapo electric oven at a surplus yard. It doesn't
have to look very good, just heat fairly accurately.
I guess the main question I had is if anyone owns one of these low budget powdercoat
kits, or, as usual, they're just crap, and you get what you pay for, like
always.
Mike Welch
> Subject: Kolb-List: Re: powder coating little parts
> From: planecrazzzy@yahoo.com
> Date: Sun, 2 Mar 2008 07:55:34 -0800
> To: kolb-list@matronics.com
>
>
> The trick isn't putting it on....it's "curing" it. ( 400 degrees/20 min ? )
>
> You don't wanna use yer house oven.
>
> Gotta Fly...
> Mike & "Jaz" in MN - FSII / White Epoxy
> .
> .
> .
>
> --------
> .
> .
> .
> .
> .
> Do Not Archive
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=167246#167246
>
>
> Attachments:
>
> http://forums.matronics.com//files/finished_upholstery_141.jpg
>
>
_________________________________________________________________
Shed those extra pounds with MSN and The Biggest Loser!
http://biggestloser.msn.com/
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I do believe someone on the Trike list is a bit Jealous..8-) hahahaha
Pulled this off the Trike list this morning...
Abid of Tampabay Aerosports is complaining about=C2-how you KOLBers =C2
-
are able to show the world what Great! climb out performance you have
And =C2-get away with it.... =C2-I'm =C2-guessing hes refering to =C2
-Sun N Fun hahaha=C2-
Imagine the noise he'd make =C2-if VGs were a standard Option =C2-hahaha
ha 8-)=C2-
Mark
Every year it pisses me off that the Kolb guys which fly nose down=C2-
(due to their AOI)can climb out like the space shuttle without=C2-
breaking the 30 degree max. rule and I get scolded for climbing out=C2-
at anything over 700 FPM at 55 MPH.=C2-
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
Justa guess Mike---but if you take a lot of little parts to a coater
and tell him any color but pink; then he might give you a break as he
could include them in with bigger , better paying jobs ? Frugal Herb
At 10:18 AM 3/2/2008, you wrote:
>
>
>Nope, don't want to use the wife's house oven, again. Did that with
>some fiberglass parts I was trying to cure in a hurry. (non-flying
>stuff parts...halloween mask, caught on fire, bad idea, anyway,
>forget the house oven idea.) Too much smoke!! (the halloween mask
>came out kind of scary, with all the burn marks!!)
>
>But, I HAVE heard using a propane grill can work very well. Yes, it
>WILL get to 400 degrees. And, according to what I heard, the
>propane's heat is very good on the powder-paint. Just suspend the
>pieces, crank it to high, watch the temp gauge and the timer.
>
>Of course, a guy could pick up a cheapo electric oven at a surplus
>yard. It doesn't have to look very good, just heat fairly accurately.
>
>I guess the main question I had is if anyone owns one of these low
>budget powdercoat kits, or, as usual, they're just crap, and you get
>what you pay for, like always.
>
>Mike Welch
>
>
> > Subject: Kolb-List: Re: powder coating little parts
> > From: planecrazzzy@yahoo.com
> > Date: Sun, 2 Mar 2008 07:55:34 -0800
> > To: kolb-list@matronics.com
> >
> >
> > The trick isn't putting it on....it's "curing" it. ( 400 degrees/20 min ? )
> >
> > You don't wanna use yer house oven.
> >
> > Gotta Fly...
> > Mike & "Jaz" in MN - FSII / White Epoxy
> > .
> > .
> > .
> >
> > --------
> > .
> > .
> > .
> > .
> > .
> > Do Not Archive
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=167246#167246
> >
> >
> >
> >
> > Attachments:
> >
> > http://forums.matronics.com//files/finished_upholstery_141.jpg
> >
> >
> >
> >
> >
> >
> >
>
>_________________________________________________________________
>Shed those extra pounds with MSN and The Biggest Loser!
>http://biggestloser.msn.com/
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Format style ( Test) |
Same here, blue in big print, I think Hillery in Maine uses the same type of print.
I am getting the mail on Cox, maybe it depends on who is the mail server.
Ron (Txaz) >:-)
Yup cox has the same options
------------------------------------
---- Mike Welch <mdnanwelch7@hotmail.com> wrote:
============
Hey Mike!!!
Yes, it came through to me, in BLUE, with large print. I even got to see a picture
of "Miss Lucky Stars, and wait!! Could it be?? The one and only....Jaz??
Awesome. Thanks for your help. Maybe my problem (i know, I have many), but my problem
in THIS case is my email server. I'll try to sign up with a new Yahoo!
account.
Appreciate your help, Mike & Retro
________________________________
> Date: Sat, 1 Mar 2008 11:38:23 -0800
> From: planecrazzzy@yahoo.com
> Subject: Kolb-List: Format style ( Test)
> To: kolb-list@matronics.com
>
> Hi Mike,
> Just Testing here....This message was sent from
> my regular Yahoo email site...where I have all the options to
> do like regular mail....
>
> Let's see if the matronics site filters it....
>
> Gotta Fly...
> Mike & "Jaz" in MN
>
> PS mailed to - kolb-list@matronics.com
>
>
> [http://forums.matronics.com/templates/Matronics/images/icon_minipost.gif]Posted: Sat Mar 01, 2008 10:24 am Post subject: Changing formats
>
> [http://forums.matronics.com/templates/Matronics/images/lang_english/icon_quote.gif]
> ________________________________
>
> Kolb guys,
>
> Can anyone tell me how to change the text formatting style I have with this list.
Presently I have the "plain text" style for the emails I send. This style
is incredibly limiting, and if I had the option, I would prefer the "rich text"
version.
> I have tried looking into the change myself, but can't seem to find a place that
offers a choice. Yet, I DO see other members that have the "rich text" version.
>
> Thanks,
>
> Mike Welch
>
> _________________________________________________________________
>
>
> Buttercup - STOL - Aircraft
> http://groups.yahoo.com/group/Buttercup-STOL/
>
> Firestar I&II - STOL - Aircraft
> http://groups.yahoo.com/group/Kolb_Firestar/
>
> My Web Site:
> http://www.geocities.com/planecrazzzy/Planecrazzzy.html
>
> Sometimes you just have to take the leap and build your wings on the way down...
>
> ________________________________
> Be a better friend, newshound, and
_________________________________________________________________
Shed those extra pounds with MSN and The Biggest Loser!
http://biggestloser.msn.com/
--
kugelair.com
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
I powder coated my cage, later I discovered the wonderful world of epoxy two part
paints. If I were to do it again the two part epoxy primer would be my choice.
That is one tough coating, like glue and paint in one. Very resistant to everything
and strong.
Ron
===========================
---- planecrazzzy <planecrazzzy@yahoo.com> wrote:
============
The trick isn't putting it on....it's "curing" it. ( 400 degrees/20 min ? )
You don't wanna use yer house oven.
Gotta Fly...
Mike & "Jaz" in MN - FSII / White Epoxy
.
.
.
--------
.
.
.
.
.
Do Not Archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=167246#167246
Attachments:
http://forums.matronics.com//files/finished_upholstery_141.jpg
--
kugelair.com
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: FS II perfomance |
My Best Ground speed so far is 106 MPH
Mike & "Jaz" in MN
>>>>>>>>>>>>>>>>>>>>>>>
Not to be out done by the blackbird drivers,,, so I will include this
limiting statement,,,
In my kolb MKIII, my best ground speed in straight and level flight, as
recorded by my garmin 196, so far is 138.5 MPH..
should have pushed the nose over and hit 150,,, what was I thinking?
Boyd
Do not archive.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Well if I recall correctly he has a business selling trikes
( http://www.tampabayaerosport.com ),
and I guess after all the marketing hype he goes to show a client his trike, and
here comes a Kolb climbing like a bat out of hell. If I recall the fellow is
from Pakistan and he had run in with the Russian that sells the SPG-2 RDU for
the Suzuki engine. Sometimes its very funny in this business.
Ron (Txaz)
=================================================
---- knowvne@aol.com wrote:
============
I do believe someone on the Trike list is a bit Jealous..8-) hahahaha
Pulled this off the Trike list this morning...
Abid of Tampabay Aerosports is complaining abouthow you KOLBers
are able to show the world what Great! climb out performance you have
And get away with it.... I'm guessing hes refering to Sun N Fun hahaha
Imagine the noise he'd make if VGs were a standard Option hahahaha 8-)
Mark
Every year it pisses me off that the Kolb guys which fly nose down
(due to their AOI)can climb out like the space shuttle without
breaking the 30 degree max. rule and I get scolded for climbing out
at anything over 700 FPM at 55 MPH.
--
kugelair.com
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
Which two part primer and paint did you have such good results with Ron ? I see
several of them advertised, but don't know which one is best.
Mike
--------
"NO FEAR" - If you have no fear you did not go as fast as you could
have !!!
Kolb MK-III Xtra, 912-S
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=167281#167281
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
I had very good results with the 2 part white paint, too, and it's easy
to repair. Seems like I got mine from Jim &
Dondi. Lar.
JetPilot wrote:
>
> Which two part primer and paint did you have such good results with Ron ? I
see several of them advertised, but don't know which one is best.
>
> Mike
>
> --------
> "NO FEAR" - If you have no fear you did not go as fast as you could
have !!!
>
> Kolb MK-III Xtra, 912-S
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=167281#167281
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Gents,
I'm in need of a bit more than a baby food jar of Poly Spray. I'm finally
getting around to patching the tears from the son in laws cats...
I have everything else but don't have any silver... and I don't need an
entire quart, as the daughter and S-I-L as well as the cats have moved out.
(for now!). So I'm trying to save $$$ I'll compensate ya of course.
Can anyone help a brother out?
Mike
Oak Grove Missouri
Mark III Classic (one of the last of Old Kolb) - 0hrs
Suzuki G13B 1.3L - 0hrs
Started with Big Lar still behind...
Do not archive
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Format style ( Test) |
That would be Ellery in Maine to you ....LOL not Hillery like in Hillery
Clinton
do not archive
Ellery in Maine
In a message dated 3/2/2008 1:17:33 P.M. Eastern Standard Time,
captainron1@cox.net writes:
Same here, blue in big print, I think Hillery in Maine uses the same type of
print. I am getting the mail on Cox, maybe it depends on who is the mail
server.
Ron (Txaz)
Yup cox has the same options
------------------------------------
---- Mike Welch <mdnanwelch7@hotmail.com> wrote:
============
--> Kolb-List message posted by: Mike Welch <mdnanwelch7@hotmail.com>
Hey Mike!!!
Yes, it came through to me, in BLUE, with large print. I even got to see a
picture of "Miss Lucky Stars, and wait!! Could it be?? The one and
only....Jaz??
Awesome. Thanks for your help. Maybe my problem (i know, I have many), but
my problem in THIS case is my email server. I'll try to sign up with a new
Yahoo! account.
Appreciate your help, Mike & Retro
________________________________
> Date: Sat, 1 Mar 2008 11:38:23 -0800
> From: planecrazzzy@yahoo.com
> Subject: Kolb-List: Format style ( Test)
> To: kolb-list@matronics.com
>
> Hi Mike,
> Just Testing here....This message was sent from
> my regular Yahoo email site...where I have all the options to
> do like regular mail....
>
> Let's see if the matronics site filters it....
>
> Gotta Fly...
> Mike & "Jaz" in MN
>
> PS mailed to - kolb-list@matronics.com
>
>
>
[http://forums.matronics.com/templates/Matronics/images/icon_minipost.gif]Posted: Sat Mar 01, 2008 10:24 am Post subject: Changing formats
>
>
[http://forums.matronics.com/templates/Matronics/images/lang_english/icon_quote.gif]
> ________________________________
>
> Kolb guys,
>
> Can anyone tell me how to change the text formatting style I have with
this list. Presently I have the "plain text" style for the emails I send. This
style is incredibly limiting, and if I had the option, I would prefer the
"rich text" version.
> I have tried looking into the change myself, but can't seem to find a
place that offers a choice. Yet, I DO see other members that have the "rich text"
version.
>
> Thanks,
>
> Mike Welch
>
> _________________________________________________________________
>
>
> Buttercup - STOL - Aircraft
> http://groups.yahoo.com/group/Buttercup-STOL/
>
> Firestar I&II - STOL - Aircraft
> http://groups.yahoo.com/group/Kolb_Firestar/
>
> My Web Site:
> http://www.geocities.com/planecrazzzy/Planecrazzzy.html
>
> Sometimes you just have to take the leap and build your wings on the way
down...
>
> ________________________________
> Be a better friend, newshound, and
_________________________________________________________________
Shed
--
kugelair.com
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | CAUTION WHEN STARTING ENGINE |
Hi Gang
My engine idles smoother when the idle r.p.m. is a little on the high
side.
I get away with this because I put a rubber band around the brake
handle when I start it ( pull start )
Although it almost got away from me one time when I started it on ice
with skiis on, luckily it didn't !!!
Check out this youtube ..... the pilot must have started the plane full
throttle....or there must have been a mechanical problem.
http://www.youtube.com/watch?v=zJVfyRDCi3o&feature=PlayList&p=117A0
AC39AEF458E&index=4
Bill Vincent
DO NOT ARCHIVE
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Fellow Kolber Mike,
It has been my experience that just because your kids and cats moved out, it
does NOT
mean they won't return. But that is another matter.....
With regard to some PolySpray, specifically how many ounces...4? I happen to
have a new gallon
from J & D Miller, and I believe I could spare some.
Send me your address, and I'll mail you a jar.
I won't hold it against you because you're in Missouri.
Mike Welch
Do not archive
>
> I'm in need of a bit more than a baby food jar of Poly Spray. I'm finally
> getting around to patching the tears from the son in laws cats...
>
> I have everything else but don't have any silver... and I don't need an
> entire quart, as the daughter and S-I-L as well as the cats have moved out.
> (for now!). So I'm trying to save $$$ I'll compensate ya of course.
>
> Can anyone help a brother out?
>
> Mike
> Oak Grove Missouri
> Mark III Classic (one of the last of Old Kolb) - 0hrs
> Suzuki G13B 1.3L - 0hrs
> Started with Big Lar still behind...
> Do not archive
>
>
_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
This is horrible but I can't remember the Manufacturer. I can see it in my mind's
eye exactly where the cans sit on my work table 1200 miles away from here,
but can't remember the name. However a few years ago we spoke about powder coating
and I did name the epoxy. Somewhere in the library there is a mention of
that manufacturer. I can say this, if you leave the crap in one of those little
clear plastic cups it will melt it. Its some strong stuff and you ought to
use a respirator, I do.
Ron (Txaz)
============
Which two part primer and paint did you have such good results with Ron ? I see
several of them advertised, but don't know which one is best.
Mike
--------
"NO FEAR" - If you have no fear you did not go as fast as you could
have !!!
Kolb MK-III Xtra, 912-S
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=167281#167281
--
kugelair.com
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Mike,
Sent you a message bc.
Thanks so much.
Mike
Do not archive
-----Original Message-----
From: owner-kolb-list-server@matronics.com
[mailto:owner-kolb-list-server@matronics.com] On Behalf Of Mike Welch
Sent: Sunday, March 02, 2008 5:49 PM
Subject: RE: Kolb-List: Poly Spray???
Fellow Kolber Mike,
It has been my experience that just because your kids and cats moved out,
it does NOT
mean they won't return. But that is another matter.....
With regard to some PolySpray, specifically how many ounces...4? I happen
to have a new gallon
from J & D Miller, and I believe I could spare some.
Send me your address, and I'll mail you a jar.
I won't hold it against you because you're in Missouri.
Mike Welch
Do not archive
>
> I'm in need of a bit more than a baby food jar of Poly Spray. I'm finally
> getting around to patching the tears from the son in laws cats...
>
> I have everything else but don't have any silver... and I don't need an
> entire quart, as the daughter and S-I-L as well as the cats have moved
out.
> (for now!). So I'm trying to save $$$ I'll compensate ya of course.
>
> Can anyone help a brother out?
>
> Mike
> Oak Grove Missouri
> Mark III Classic (one of the last of Old Kolb) - 0hrs
> Suzuki G13B 1.3L - 0hrs
> Started with Big Lar still behind...
> Do not archive
>
>
_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Format style ( Test) |
I used to live in South Berwick Me not far from the Kittery Trading Post. Maine
is the best State in New England in my opinion inclusive of the sometimes harsh
weather and the big pesky skitters. I even got my Commercial Ticket at PWM.
Had a great time, if I knew then what I know now I probably would have remained
a Maniac. >:-)
Ron Txaz
======================================
---- ElleryWeld@AOL.COM wrote:
============
That would be Ellery in Maine to you ....LOL not Hillery like in Hillery
Clinton
do not archive
Ellery in Maine
In a message dated 3/2/2008 1:17:33 P.M. Eastern Standard Time,
captainron1@cox.net writes:
Same here, blue in big print, I think Hillery in Maine uses the same type of
print. I am getting the mail on Cox, maybe it depends on who is the mail
server.
Ron (Txaz)
Yup cox has the same options
------------------------------------
---- Mike Welch <mdnanwelch7@hotmail.com> wrote:
============
Hey Mike!!!
Yes, it came through to me, in BLUE, with large print. I even got to see a
picture of "Miss Lucky Stars, and wait!! Could it be?? The one and
only....Jaz??
Awesome. Thanks for your help. Maybe my problem (i know, I have many), but
my problem in THIS case is my email server. I'll try to sign up with a new
Yahoo! account.
Appreciate your help, Mike & Retro
________________________________
> Date: Sat, 1 Mar 2008 11:38:23 -0800
> From: planecrazzzy@yahoo.com
> Subject: Kolb-List: Format style ( Test)
> To: kolb-list@matronics.com
>
> Hi Mike,
> Just Testing here....This message was sent from
> my regular Yahoo email site...where I have all the options to
> do like regular mail....
>
> Let's see if the matronics site filters it....
>
> Gotta Fly...
> Mike & "Jaz" in MN
>
> PS mailed to - kolb-list@matronics.com
>
>
[http://forums.matronics.com/templates/Matronics/images/icon_minipost.gif]Posted: Sat Mar 01, 2008 10:24 am Post subject: Changing formats
>
>
[http://forums.matronics.com/templates/Matronics/images/lang_english/icon_quote.gif]
> ________________________________
>
> Kolb guys,
>
> Can anyone tell me how to change the text formatting style I have with
this list. Presently I have the "plain text" style for the emails I send. This
style is incredibly limiting, and if I had the option, I would prefer the
"rich text" version.
> I have tried looking into the change myself, but can't seem to find a
place that offers a choice. Yet, I DO see other members that have the "rich text"
version.
>
> Thanks,
>
> Mike Welch
>
> _________________________________________________________________
>
>
> Buttercup - STOL - Aircraft
> http://groups.yahoo.com/group/Buttercup-STOL/
>
> Firestar I&II - STOL - Aircraft
> http://groups.yahoo.com/group/Kolb_Firestar/
>
> My Web Site:
> http://www.geocities.com/planecrazzzy/Planecrazzzy.html
>
> Sometimes you just have to take the leap and build your wings on the way
down...
>
> ________________________________
> Be a better friend, newshound, and
_________________________________________________________________
Shed
--
kugelair.com
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
--
kugelair.com
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New camera position |
Finally got the vibration out of the wing camera today.
Now when it' gets nice I can shoot some new stuff.
Just wish "Goggle" & "Youtube" didn't degrade the
videos so bad....but they're free.
http://video.google.com/videoplay?docid=-2825309555058763666
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Format style ( Test) |
We have plenty of snow this year a good year to get stuck on skiis on a
lake somewhere in the wilderness Maine is a great place to live if you hunt and
fish but we get taxed to death here, sometimes you got to wonder if its
worth it, but I guess the grass is always greener on the other side of the
fence until you jump it.
do not archive
Ellery in Maine
In a message dated 3/2/2008 7:15:43 P.M. Eastern Standard Time,
captainron1@cox.net writes:
I used to live in South Berwick Me not far from the Kittery Trading Post.
Maine is the best State in New England in my opinion inclusive of the sometimes
harsh weather and the big pesky skitters. I even got my Commercial Ticket at
PWM. Had a great time, if I knew then what I know now I probably would have
remained a Maniac.
Ron Txaz
======================================
---- ElleryWeld@AOL.COM wrote:
============
That would be Ellery in Maine to you ....LOL not Hillery like in Hillery
Clinton
do not archive
Ellery in Maine
In a message dated 3/2/2008 1:17:33 P.M. Eastern Standard Time,
captainron1@cox.net writes:
Same here, blue in big print, I think Hillery in Maine uses the same type of
print. I am getting the mail on Cox, maybe it depends on who is the mail
server.
Ron (Txaz)
Yup cox has the same options
------------------------------------
---- Mike Welch <mdnanwelch7@hotmail.com> wrote:
============
--> Kolb-List message posted by: Mike Welch <mdnanwelch7@hotmail.com>
Hey Mike!!!
Yes, it came through to me, in BLUE, with large print. I even got to see a
picture of "Miss Lucky Stars, and wait!! Could it be?? The one and
only....Jaz??
Awesome. Thanks for your help. Maybe my problem (i know, I have many), but
my problem in THIS case is my email server. I'll try to sign up with a new
Yahoo! account.
Appreciate your help, Mike & Retro
________________________________
> Date: Sat, 1 Mar 2008 11:38:23 -0800
> From: planecrazzzy@yahoo.com
> Subject: Kolb-List: Format style ( Test)
> To: kolb-list@matronics.com
>
> Hi Mike,
> Just Testing here....This message was sent from
> my regular Yahoo email site...where I have all the options to
> do like regular mail....
>
> Let's see if the matronics site filters it....
>
> Gotta Fly...
> Mike & "Jaz" in MN
>
> PS mailed to - kolb-list@matronics.com
>
>
[http://forums.matronics.com/templates/Matronics/images/icon_minipost.gif]Post
ed: Sat Mar 01, 2008 10:24 am Post subject: Changing formats
>
>
[http://forums.matronics.com/templates/Matronics/images/lang_english/icon_quot
e.gif]
> ________________________________
>
> Kolb guys,
>
> Can anyone tell me how to change the text formatting style I have with
this list. Presently I have the "plain text" style for the emails I send.
This
style is incredibly limiting, and if I had the option, I would prefer the
"rich text" version.
> I have tried looking into the change myself, but can't seem to find a
place that offers a choice. Yet, I DO see other members that have the "rich
text"
version.
>
> Thanks,
>
> Mike Welch
>
> _________________________________________________________________
>
>
> Buttercup - STOL - Aircraft
> http://groups.yahoo.com/group/Buttercup-STOL/
>
> Firestar I&II - STOL - Aircraft
> http://groups.yahoo.com/group/Kolb_Firestar/
>
> My Web Site:
> http://www.geocities.com/planecrazzzy/Planecrazzzy.html
>
> Sometimes you just have to take the leap and build your wings on the way
down...
>
> ________________________________
> Be a better friend, newshound, and
_________________________________________________________________
Shed
--
kugelair.com
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duff
y/
2050827?NCID=aolcmp00300000002598)
--
kugelair.com
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
Finally got the vibration out of the wing camera today.
Now when it' gets nice I can shoot some new stuff.
Just wish "Goggle" & "Youtube" didn't degrade the
videos so bad....but they're free.
http://video.google.com/videoplay?docid=-2825309555058763666
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
Possum.....thanks for the great video..
Bill Vincent
DO NOT ARCHIVE
>
>
> Finally got the vibration out of the wing camera today.
> Now when it' gets nice I can shoot some new stuff.
>
> Just wish "Goggle" & "Youtube" didn't degrade the
> videos so bad....but they're free.
>
> http://video.google.com/videoplay?docid=-2825309555058763666
>
>
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
At 08:57 PM 3/2/2008, possums wrote:
>Finally got the vibration out of the wing camera today.
>Now when it' gets nice I can shoot some new stuff.
>
>Just wish "Goggle" & "Youtube" didn't degrade the
>videos so bad....but they're free.
Looks good... how did you mount the camera to avoid the vibration?
Even my non-flying wife liked your video.
Vimeo is another video sharing site that lets you upload high definition
(1280x720) video.
-Dana
--
"Next year in Galt's Gulch!"
Message 24
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: powder coating little parts |
A friend has one; does good on small parts.
Howard Shackleford
FS II
SC
In a message dated 3/2/2008 9:52:14 A.M. Eastern Standard Time,
airspeedx3@yahoo.com writes:
Kolb group,
Good morning. I was wondering if anyone has ever tried using one of those
inexpensive
"powdercoat at home" things? I have seen them advertized for about $50, and
then you buy the
powder color you want. Thank you for your help.
Dudley
Building a MkIII
____________________________________
Be a better friend, newshound, and
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
Message 25
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
Hey Possum
NICE footage..
But I would like to offer up one suggestion as a PROFESSIONAL Still =C2-Ph
otographer...
When you attached your camera jack up the tail of the plane so that the wing
s AOA
is closer to what you would have when in level flight... That way your foota
ge wont=C2-
look as if your always climbing=C2-or flying on the edge of stall.. 8-)
=C2-
Other than that I enjoyed the clip.... =C2-Are those air scoops I see on t
he side of =C2-your bird?
Check out a recent article & Pic. =C2-I submitted to Barnstormers.com
http://www.barnstormers.com/eFLYER/2008/010-eFLYER-FA03-hanggliding.html
Mark=C2-
-----Original Message-----
From: possums <possums@bellsouth.net>
Sent: Sun, 2 Mar 2008 8:57 pm
Subject: Re: Kolb-List: New camera position
=C2-
=C2-
Finally got the vibration out of the wing camera today.=C2-
Now when it' gets nice I can shoot some new stuff.=C2-
=C2-
Just wish "Goggle" & "Youtube" didn't degrade the=C2-
videos so bad....but they're free.=C2-
=C2-
http://video.google.com/videoplay?docid=-2825309555058763666=C2-
=C2-
============C2-
============C2-
============C2-
============C2-
=C2-
=C2-
Message 26
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
At 09:13 PM 3/2/2008, you wrote:
>
>Vimeo is another video sharing site that lets
>you upload high definition (1280x720) video.
>
>-Dana
I put it here
http://www.veoh.com/videos/v6316944zRsxJ3ra -
it looks a lot better,
but I had to download a program to be able to watch it in high def.
Don't think many people would be willing to do that.
-----------------------------------------------------
When you attached your camera jack up the tail of
the plane so that the wings AOA
is closer to what you would have when in level
flight... That way your footage wont
look as if your always climbing or flying on the edge of stall.. 8-)
--------------------------------
I am always climbing or on the edge of a stall.8-)
Just set the thing up and guessed at level this time.
Message 27
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New camera position |
>
>When you attached your camera jack up the tail
>of the plane so that the wings AOA
>is closer to what you would have when in level
>flight... That way your footage wont=C2
>look as if your always climbing=C2 or flying on the edge of stall.. 8-) =C2
>
>--------------------------------
>I am always climbing or on the edge of a stall.8-)
>Just set the thing up and guessed at level this time.
Message 28
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Poly Spray??? |
Mike
Don't go cheap on us now. Go ahead a buy a quart of the stuff. Trust me this
will not be the last time you will need to fix something on your plane.
There are only two reasons for not having some around. One is you are going
to sell it soon or two it will sit in the hanger and never move. It has a
long shelf life.
Do not archive
Rick Neilsen
Redrive VW powered MKIIIC
----- Original Message -----
From: "Kolbdriver" <kolbdriver@mlsharp.com>
Sent: Sunday, March 02, 2008 3:58 PM
Subject: Kolb-List: Poly Spray???
>
> Gents,
>
>
> I'm in need of a bit more than a baby food jar of Poly Spray. I'm finally
> getting around to patching the tears from the son in laws cats...
>
> I have everything else but don't have any silver... and I don't need an
> entire quart, as the daughter and S-I-L as well as the cats have moved
> out.
> (for now!). So I'm trying to save $$$ I'll compensate ya of course.
>
> Can anyone help a brother out?
>
> Mike
> Oak Grove Missouri
> Mark III Classic (one of the last of Old Kolb) - 0hrs
> Suzuki G13B 1.3L - 0hrs
> Started with Big Lar still behind...
> Do not archive
>
>
>
Message 29
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Poly Spray??? |
Last that I bought from Aircraft Spruce had no hazardous material
charge...when shipped by UPS. do not know if that is universally true? Herb
At 09:53 PM 3/2/2008, you wrote:
><NeilsenRM@comcast.net>
>
>Mike
>
>Don't go cheap on us now. Go ahead a buy a quart of the stuff. Trust
>me this will not be the last time you will need to fix something on
>your plane. There are only two reasons for not having some around.
>One is you are going to sell it soon or two it will sit in the
>hanger and never move. It has a long shelf life.
>
>Do not archive
>
>Rick Neilsen
>Redrive VW powered MKIIIC
>
>----- Original Message ----- From: "Kolbdriver" <kolbdriver@mlsharp.com>
>To: <kolb-list@matronics.com>
>Sent: Sunday, March 02, 2008 3:58 PM
>Subject: Kolb-List: Poly Spray???
>
>
>>
>>Gents,
>>
>>
>>I'm in need of a bit more than a baby food jar of Poly Spray. I'm finally
>>getting around to patching the tears from the son in laws cats...
>>
>>I have everything else but don't have any silver... and I don't need an
>>entire quart, as the daughter and S-I-L as well as the cats have moved out.
>>(for now!). So I'm trying to save $$$ I'll compensate ya of course.
>>
>>Can anyone help a brother out?
>>
>>Mike
>>Oak Grove Missouri
>>Mark III Classic (one of the last of Old Kolb) - 0hrs
>>Suzuki G13B 1.3L - 0hrs
>>Started with Big Lar still behind...
>>Do not archive
>>
>>
>>
>>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|