---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Wed 04/30/08: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:29 AM - Re: Sun N Fun 2008 (icrashrc) 2. 06:56 AM - Re: Re: Balance Master ( Prop Balancer) (TK) 3. 08:14 AM - Re: Balance Master ( Prop Balancer) (lucien) 4. 08:42 AM - Re: Re: Balance Master ( Prop Balancer) (Russ Kinne) 5. 09:35 AM - Re: Re: Balance Master ( Prop Balancer) (TK) 6. 06:25 PM - Re: Pennzoil 2 cycle oil best prices? (N27SB@aol.com) 7. 06:29 PM - 50 foot paint job and trailer for sale (Larry Cottrell) ________________________________ Message 1 _____________________________________ Time: 04:29:17 AM PST US Subject: Kolb-List: Re: Sun N Fun 2008 From: "icrashrc" John W. For the kind words I'll let you view those pictures and video for free. :-) John H. I thought you would get a kick out of a slightly different perspective on your takeoff and landing. The M3X looked to me like it was doing just fine on total runway use. It's not a single seat Firestar or a special design bush plane [Highlander]. It's a nice multi-purpose two place pusher. With this in mind it seems to perform well above average to me. -------- Scott www.ill-EagleAviation.com do not archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=180207#180207 ________________________________ Message 2 _____________________________________ Time: 06:56:41 AM PST US From: TK Subject: Re: Kolb-List: Re: Balance Master ( Prop Balancer) planecrazzzy wrote: > > How much would a pound cost ? > > My Uncle used to tear apart the old light switches when we would Demo a house or other buildings...( 40-45 yrs ago ) He had a little jar with quite a > bit of Mercury in it....Man, was it heavy... > > Gotta Fly... > Mike & "Jaz" in MN > . > . > . > > > >> I've got several pounds of it if your interested. >> >> Terry - FireFly #95 Mike, Not sure what a pound costs today, the problem would be in transporting it. I'm sure there would be all kinds of restrictions! Your welcome to stop by and pick some up if interested. I use it occasionally for creations of my own, such as a shock eliminating stabilizer for my bow. Fascinating metal to work with. Terry - FireFly #95 Do Not Archive ________________________________ Message 3 _____________________________________ Time: 08:14:24 AM PST US Subject: Kolb-List: Re: Balance Master ( Prop Balancer) From: "lucien" planecrazzzy wrote: > I had some shaking/vibrating ( wings off ) when I started my plane > last weekend... > > I'm running two blades on my IVO...Last year it seemed to run > just fine... > > Doubt the balance master would help much, never heard of a case where it did help very much. A much cheaper option is to make sure the blades have the same pitch. This is the trick to a smooth IVO in 2-blades - with the hub bolts at full tightness, the torque rods can be slightly "clamped" and won't move on their own when you're in the region of natural pitch. You can see this by, say, cranking the pitch adjust in a turn or two from natural pitch and then back it out. You'll likely notice the screw unscrews very easily, which means the cams are stationary while the screw moves through the "play" between the cam and its big groove. If that's happening, make sure when you're doing the pitch adjust to start, say, overly coarse and only rotate the bolt in the fine direction until the right pitch is achieved. DON"T back it out at that point, lock it down right there. I ran the IVO in 2 blades for years on my trike with very smooth results as long as I made sure of the above...... in 2-blades it's superb on a fast plane..... LS -------- LS FS II Read this topic online here: http://forums.matronics.com/viewtopic.php?p=180259#180259 ________________________________ Message 4 _____________________________________ Time: 08:42:24 AM PST US From: Russ Kinne Subject: Re: Kolb-List: Re: Balance Master ( Prop Balancer) In re mercury -- we used to rub dimes in kit -- before it was poisonous. Try it. Not kolb-related; do not archive On Apr 30, 2008, at 9:54 AM, TK wrote: > planecrazzzy wrote: >> >> >> >> How much would a pound cost ? >> >> My Uncle used to tear apart the old light switches when we would >> Demo a house or other buildings...( 40-45 yrs ago ) He had a >> little jar with quite a >> bit of Mercury in it....Man, was it heavy... >> >> Gotta Fly... >> Mike & "Jaz" in MN >> . >> . >> . >> >> >> >> >>> I've got several pounds of it if your interested. >>> >>> Terry - FireFly #95 > Mike, > > Not sure what a pound costs today, the problem would be in > transporting it. I'm sure there would be all kinds of > restrictions! Your welcome to stop by and pick some up if > interested. I use it occasionally for creations of my own, such as > a shock eliminating stabilizer for my bow. Fascinating metal to > work with. > > Terry - FireFly #95 > > Do Not Archive > > ________________________________ Message 5 _____________________________________ Time: 09:35:58 AM PST US From: TK Subject: Re: Kolb-List: Re: Balance Master ( Prop Balancer) lucien wrote: > > > planecrazzzy wrote: > >> I had some shaking/vibrating ( wings off ) when I started my plane >> last weekend... >> >> I'm running two blades on my IVO...Last year it seemed to run >> just fine... >> >> >> > > > Doubt the balance master would help much, never heard of a case where it did help very much. > > A much cheaper option is to make sure the blades have the same pitch. This is the trick to a smooth IVO in 2-blades - with the hub bolts at full tightness, the torque rods can be slightly "clamped" and won't move on their own when you're in the region of natural pitch. > > You can see this by, say, cranking the pitch adjust in a turn or two from natural pitch and then back it out. You'll likely notice the screw unscrews very easily, which means the cams are stationary while the screw moves through the "play" between the cam and its big groove. > > If that's happening, make sure when you're doing the pitch adjust to start, say, overly coarse and only rotate the bolt in the fine direction until the right pitch is achieved. DON"T back it out at that point, lock it down right there. > > I ran the IVO in 2 blades for years on my trike with very smooth results as long as I made sure of the above...... in 2-blades it's superb on a fast plane..... > > LS > > -------- > LS > FS II > As I said before, I found them to help. Even Rotax must have some faith in them, they have something similar, a hydro dampener, on their larger two strokers. Adjusting the pitch on a wood prop is a bit dicey! Yeah, they won't make up for a poorly balanced prop, but will give that final tweak to smooth things out. Don't condemn that which you haven't tried, Terry - FireFly #95 ________________________________ Message 6 _____________________________________ Time: 06:25:41 PM PST US From: N27SB@aol.com Subject: Re: Kolb-List: Pennzoil 2 cycle oil best prices? Guys, I hate to start a panic here but Pennzoil has discontinued production of this product, the only supply out there is what is in circulation. It has something to do with Shell buying the product line. Lockwood is testing several new products as a replacement. Lockwood recently bought the last 500 cases available. No one knows about this yet so it is a good time to stock up. Lockwood seems to think that the replacement will be as good or better. Lockwood originally did the testing for Rotax and Penzoil. Steve B Firefly 007/Floats Firefly 0040/ Floats 2008 SnF Grand Champion do not archive In a message dated 4/29/2008 8:01:55 P.M. Eastern Daylight Time, d-m-hague@comcast.net writes: >Where do you all buy your Pennzoil air cooled 2 cycle oil from? > Steve B Firefly 007/Floats Firefly 0040/ Floats 2008 SnF Grand Champion do not archive **************Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. (http://autos.aol.com/used?NCID=aolcmp00300000002851) ________________________________ Message 7 _____________________________________ Time: 06:29:26 PM PST US From: "Larry Cottrell" Subject: Kolb-List: 50 foot paint job and trailer for sale Gang, Sorry, I should have mentioned that I am in the Southeastern part of Oregon. Unfortunately the trailer will not accommodate anything larger than a Firestar II. My asking price is $1800.00. Photos available. Larry C ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.