Today's Message Index:
----------------------
1. 01:56 AM - Rotax 582 water cooled. Help! (Carlo Tura)
2. 03:42 AM - Broken protection washer (Lanny Fetterman)
3. 03:48 AM - Kolb List Re: Broken protection washer (william sullivan)
4. 05:47 AM - Re: Broken protection washer (cristalclear13)
5. 08:54 AM - Re: Rotax 582 water cooled. Help! (Vincent Nicely)
6. 08:58 AM - Re: Kolb List Re: Broken protection washer (ElleryWeld@aol.com)
7. 12:04 PM - Transition Pilot for Kolbra (shad)
8. 12:38 PM - Re: Broken protection washer (Russ Kinne)
9. 12:40 PM - Re: Re: Selling my Firstar (Russ Kinne)
10. 01:01 PM - Re: Re: Selling my Firstar (robert bean)
11. 01:24 PM - Re: Broken protection washer (cristalclear13)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Rotax 582 water cooled. Help! |
I need to install the Rotax 582 on my Kolb Mark II, water cooled.
Is there anibody that can tell me where I can put the radiator cooling,
perhaps with some photos attached.
Thank you Carlo from Italy
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Broken protection washer |
Cristal, How many hours on your 503? Lanny N598LF Do not archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Kolb List re: Broken protection washer |
Cristal- Nice catch! I am checking on a vibration at idle problem on my Firestar,
and I think I hear a metallic rattle. I'll have to check that. Thanks.
do not archive
Bill Sullivan
Windsor Locks, Ct.
FS/KX/447
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Broken protection washer |
Hard to tell really. I bought this Mark II used last year, prepared it for airworthiness
inspection and started flying it in April of this year. The Hobbs
meter only reads around 35 hours (I think it was a rebuilt engine), but no telling
how old the part that broke was.
--------
Cristal
Mark II Twinstar
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=187111#187111
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rotax 582 water cooled. Help! |
Carlo,
Richard Pike has some information on his we site.
http://www.bcchapel.org/pages/0003/kolb.htm
Vince Nicely
Carlo Tura wrote:
>
> I need to install the Rotax 582 on my Kolb Mark II, water cooled.
> Is there anibody that can tell me where I can put the radiator cooling,
> perhaps with some photos attached.
> Thank you Carlo from Italy
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kolb List re: Broken protection washer |
Bill
The two strokes do have a Vibration at idle what you might be hearing is
Gear box Rattling does it go away as soon as you step the throttle up a tad,
if so not much to worry about I always changes the gear box oil a couple
times a summer that's a good chance to see if the magnetic plug in it has
collected any thing new
Ellery in Maine
do not archive
In a message dated 6/10/2008 6:49:06 A.M. Eastern Daylight Time,
williamtsullivan@att.net writes:
Cristal- Nice catch! I am checking on a vibration at idle problem on my
Firestar, and I think I hear a metallic rattle. I'll have to check that. Thanks.
do not archive
Bill Sullivan
Windsor Locks, Ct.
FS/KX/447
(http://www.matronics.com/Navigator?Kolb-List)
(http://www.matronics.com/contribution)
**************Vote for your city's best dining and nightlife. City's Best
2008. (http://citysbest.aol.com?ncid=aolacg00050000000102)
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Transition Pilot for Kolbra |
I live in Amarillo, Texas and I am in need of a Kolb transition pilot,
hopefully within a 300 mile radius. I am a private pilot with 230 hrs in
single engine, fixed wing, high performance, complex, but no tailwheel
experience. It would be nice to sign off in a side by side like the Mark
III or Mark IV. I own a King Kolbra with a Jabiru 2200 and 2 hours on it.
Any help would be appreciated.
Thank you, Shad.
shad@amaonline.com
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Broken protection washer |
Next time you feel a "major vibration " or a "shaking on takeoff"--
better find out what it is BEFORE you fly again
do not archive
On Jun 9, 2008, at 10:04 PM, cristalclear13 wrote:
> <cristalclearwaters@juno.com>
>
> Take a look at what I found wedged in behind my fan belt tonight.
> The protection washer that is directly behind my fan belt broke.
> (Number 10 in the CPS picture) I have a Rotax 503 DCSI. I am
> blessed it didn't break anything else, like the fan belt.
>
> Early symptoms included an increase or reduction in RPM while not
> moving the throttle. However the fan belt was still at good
> tension at that time.
> Most recent symptoms included major vibration when starting the
> engine while the idle was still low. I also felt a shaking on take
> off. After a couple times starting with such vibration, I checked
> the fan belt again and it was extremely loose. I took the cover
> off and found this broken guy sitting there.
> Whew! [Shocked]
>
> --------
> Cristal
> Mark II Twinstar
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=187062#187062
>
>
> Attachments:
>
> http://forums.matronics.com//files/broken_protection_washer_530.jpg
>
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Selling my Firstar |
Curious as to what 'factory made plane' you got?
do not archive
On Jun 9, 2008, at 11:57 PM, Jim ODay wrote:
>
> The trailer is "extra". I am selling the trailer for $4000 by
> itself. You can have the package for $14K. Heck of a deal.
>
> Now as far as a trailer, is it over done for the payload, but it
> pulls straight and the bird is secure inside. it has been raining
> cats and dogs here but the unit is dry inside, I went out and
> measured it up for a fellow.
>
> It is 5'10" x 23'10" inside.
>
> On your comment about getting out after a year ...... and losing
> money. I wish I was able to net out even $4$ for what I stick into
> my my past hobbies. I have raced cars, motorcycles, sailboats.
> Been into classic cars and street rods. Beer, wine, whiskey.
> Girls. Computers, Audio Video. ........... None made me any money.
>
> I have been "plane crazy" since I was 6 and expect that I will
> continue to buy planes. I may build another, but right now I have
> more $ than time. The time things gets int he way of flying and I
> can only fly one at a time and I have 3 planes today. They do not
> do well if not flown regularly. So my little bird is leaving the
> nest. I never expect to get even $ wise on planes, but I continue
> to enjoy flying, it is great therapy, and it is cheaper than
> psychoanalysis.
>
> I like the FS, it was a lot of fun flying it last night. But I
> want to do some traveling like some of the fellow Kolbers and I am
> not up to it in the FS at this time. So, I bought a factory made
> plane. I don't really want to sell the FS but I know it will
> become a hanger queen and that would be wrong.
>
> If she does not sell, that may be OK too, that may be how it is
> suppose to work out.
>
> Jim
>
> --------
> Jim O'Day
> Fargo, ND
> Firestar II
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=187077#187077
>
>
> Attachments:
>
> http://forums.matronics.com//files/phpassnsrpm_105.jpg
> http://forums.matronics.com//files/store_pictures_053_642.jpg
> http://forums.matronics.com//files/store_pictures_057_554.jpg
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Selling my Firstar |
Russ, he posted a pic of his new citabria. A mighty sturdy ride, one
you feel secure in whilst
doing unnatural maneouvers.
BB
On 10, Jun 2008, at 3:36 PM, Russ Kinne wrote:
>
> Curious as to what 'factory made plane' you got?
> do not archive
>
>
> On Jun 9, 2008, at 11:57 PM, Jim ODay wrote:
>
>>
>> The trailer is "extra". I am selling the trailer for $4000 by
>> itself. You can have the package for $14K. Heck of a deal.
>>
>> Now as far as a trailer, is it over done for the payload, but it
>> pulls straight and the bird is secure inside. it has been
>> raining cats and dogs here but the unit is dry inside, I went out
>> and measured it up for a fellow.
>>
>> It is 5'10" x 23'10" inside.
>>
>> On your comment about getting out after a year ...... and losing
>> money. I wish I was able to net out even $4$ for what I stick
>> into my my past hobbies. I have raced cars, motorcycles,
>> sailboats. Been into classic cars and street rods. Beer, wine,
>> whiskey. Girls. Computers, Audio Video. ........... None made me
>> any money.
>>
>> I have been "plane crazy" since I was 6 and expect that I will
>> continue to buy planes. I may build another, but right now I have
>> more $ than time. The time things gets int he way of flying and I
>> can only fly one at a time and I have 3 planes today. They do not
>> do well if not flown regularly. So my little bird is leaving the
>> nest. I never expect to get even $ wise on planes, but I continue
>> to enjoy flying, it is great therapy, and it is cheaper than
>> psychoanalysis.
>>
>> I like the FS, it was a lot of fun flying it last night. But I
>> want to do some traveling like some of the fellow Kolbers and I am
>> not up to it in the FS at this time. So, I bought a factory made
>> plane. I don't really want to sell the FS but I know it will
>> become a hanger queen and that would be wrong.
>>
>> If she does not sell, that may be OK too, that may be how it is
>> suppose to work out.
>>
>> Jim
>>
>> --------
>> Jim O'Day
>> Fargo, ND
>> Firestar II
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=187077#187077
>>
>>
>>
>>
>> Attachments:
>>
>> http://forums.matronics.com//files/phpassnsrpm_105.jpg
>> http://forums.matronics.com//files/store_pictures_053_642.jpg
>> http://forums.matronics.com//files/store_pictures_057_554.jpg
>>
>>
>>
>>
>>
>>
>>
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Broken protection washer |
Thanks Dad!
Woulda..couldna...shoulda..
[Embarassed]
do not archive
--------
Cristal
Mark II Twinstar
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=187223#187223
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|