---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 04/02/09: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:33 AM - Fear of Liability (Fredrick Kerfoot) 2. 06:02 AM - Re: Fear of Liability (Mike Welch) 3. 02:33 PM - Re: Maule SFS-P8A tail wheel on Kolb... (JetPilot) 4. 03:06 PM - Re: Re: Maule SFS-P8A tail wheel on Kolb... (robert bean) 5. 07:32 PM - Re: fuel flow meter (Robert Laird) 6. 07:51 PM - Re: fuel flow meter (Robert Laird) ________________________________ Message 1 _____________________________________ Time: 03:33:10 AM PST US From: Fredrick Kerfoot Subject: Kolb-List: Fear of Liability Do Not Archive Imagine where we be today if Homer had been afraid of being sued for design ing a "dangerous" airplane. Don't expect any improvement in the legal system from Mister Obama. Just r emember after all he is=2C first=2C foremost and above all else=2C a lawyer .. Fortunately everybody knows how to easily tell when a lawyer is lying. Fred K "O" No!! . . . we told you so _________________________________________________________________ Quick access to your favorite MSN content and Windows Live with Internet Ex plorer 8. http://ie8.msn.com/microsoft/internet-explorer-8/en-us/ie8.aspx?ocid=B037 MSN55C0701A ________________________________ Message 2 _____________________________________ Time: 06:02:55 AM PST US From: Mike Welch Subject: RE: Kolb-List: Fear of Liability >Do Not Archive >Imagine where we be today if Homer had been afraid of being sued for desi gning a "dangerous" >airplane. >Fred K Hi Fred=2C Haven't heard from you before. Hi. Good point regarding Homer designing a plane and trying to sell his desig n. It's important to note=2C however=2C that because of the (present) free dom we have in this country=2C we can build an airplane ourselves=2C and fl y this airplane=2C with few restrictions. The "homebuilt pioneers"=2C like Paul Poberezny and many others=2C fought hard for us to have the right=2C that we have as Americans=2C can enjoy un der Experimental Category Aircraft rules. (some could claim we have always had the right!!!) I don't think Homer should have much to fear=2C even in this day and age of litigation happy people=2C if he decided to design another plane today =2C and sell it. He is=2C after all=2C just designing something and supply ing a few pre-made parts. This is the point of the 51% percent rule. More than HALF of the plane must be built by the owner. This greatly frees the "designer" from virtually all fault in a poorly built airplane. All a designer would have to prove in court is there are lots of his (sam e) designed aircraft flying all over the place=2C quite successfully. This would lay all the blame back on the guy who crashed the plane. It will in 99.99999% of the time=2C show the builder or pilot is truly at fault! (who =2C invariably=2C ran out of gas=2C used wrong bolt=2C flew into electric w ires=2C put part in backwards and upside down=2C landed in 55mph crosswind =2C something leaked=2C etc=2C etc=2C etc) I have no doubt Homer fully tested all the components that were to be inc luded in his kits. Boom tube thickness engineered for maximum torque at 6+ Gs=2C fittings welded to withstand maximum forces=2C etc. He intended his design to accomplish a certain mission. Not building=2C or flying the pla ne=2C within these limits generally releases him from liability. I have made a few design changes to my plane (MkIII Classic). I have the freedom to do that. It's MY plane!!! I do=2C however=2C accept that thes e changes better be good enough to retain the original safety standards. I believe they do. Even in today's world=2C a designer could still come up with a sensible d esign. Build it. Thoroughly test it=2C on the ground and in the air. Sup ply engineering calcs. Insure all products he makes are of the utmost qual ity. Sell the kits!! Experimental Category Aircraft rules....enjoy it while the offer lasts! Mike Welch MkIII _________________________________________________________________ Quick access to your favorite MSN content and Windows Live with Internet Ex plorer 8. http://ie8.msn.com/microsoft/internet-explorer-8/en-us/ie8.aspx?ocid=B037 MSN55C0701A ________________________________ Message 3 _____________________________________ Time: 02:33:12 PM PST US Subject: Kolb-List: Re: Maule SFS-P8A tail wheel on Kolb... From: "JetPilot" I like the larger tailwheels, I need to do that one day, along with a bunch of other projects :) I was wondering how the larger 6 inch Aircraft Spruce tailwheel would fit on a round spring. Did drilling it out leave enough material for the tailwheel not to crack at the mount ? John H's bracing on tail is also nice, if I had the ability to weld, I would do that also. Mike -------- "NO FEAR" - If you have no fear you did not go as fast as you could have !!! Kolb MK-III Xtra, 912-S Read this topic online here: http://forums.matronics.com/viewtopic.php?p=237436#237436 ________________________________ Message 4 _____________________________________ Time: 03:06:49 PM PST US From: robert bean Subject: Re: Kolb-List: Re: Maule SFS-P8A tail wheel on Kolb... Mike, plenty of wall thickness after the resizing. I also shortened the spring rod. BB On 2, Apr 2009, at 5:31 PM, JetPilot wrote: > > I like the larger tailwheels, I need to do that one day, along with > a bunch of other projects :) I was wondering how the larger 6 > inch Aircraft Spruce tailwheel would fit on a round spring. Did > drilling it out leave enough material for the tailwheel not to > crack at the mount ? John H's bracing on tail is also nice, if I > had the ability to weld, I would do that also. > > Mike > > -------- > "NO FEAR" - If you have no fear you did not go as fast > as you could have !!! > > Kolb MK-III Xtra, 912-S > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=237436#237436 > > ________________________________ Message 5 _____________________________________ Time: 07:32:31 PM PST US From: Robert Laird Subject: Kolb-List: Re: fuel flow meter ________________________________ Message 6 _____________________________________ Time: 07:51:31 PM PST US From: Robert Laird Subject: Kolb-List: Re: fuel flow meter I got a Navman 3100 fuel flow meter.... my console wasn't big enough for it, so I hand-made a box for it to go into, and put it on the "floor" of my MkIII... all the power and cables are underneath, so it's a clean installation. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.