Today's Message Index:
----------------------
1. 10:52 AM - Re: Re: Gaggle of 5 in Sherman, TX (frank.goodnight)
2. 12:35 PM - Rock House (Larry Cottrell)
3. 02:51 PM - Rotax 582 Gearbox Choices (mark rinehart)
4. 03:21 PM - Re: Rotax 582 Gearbox Choices (Richard Girard)
5. 03:51 PM - Re: Rotax 582 Gearbox Choices (Tom Longo)
6. 06:37 PM - MV (Nelson, Craig)
7. 09:56 PM - Re: Re: Gaggle of 5 in Sherman, TX (Ron)
8. 10:13 PM - Re: Rock House (R. Hankins)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Gaggle of 5 in Sherman, TX |
Hi everybody,
Just got back from my first trip to MV , 2874 miles by trailer. I flew
for almost 5 Hrs.while
i was there , met several of the people that use the kolb-list, and
learned quite a bit about
my airplane [a couple of things I had done wrong when I built it].
Also had several Firsts -
first time I ever operated from anything other than sea level- first
tailwind landing-first time
landing or tacking off up or downhill-also the first time I ever flew
where there was much
thermal activity.There were some very pretty airplanes .One poor guy
had about as much
bad luck as a person can have [ on his whole trip ] no one hurt. I"ll
let him , or someone
else write about that. All in all I had more fun than I"ve had in a
lot of years, much more
than a 68 year old should have. I felt like a kid again with new and
exciteing things to do.
I hope I can talk my wife into going next year.
Frank Goodnight
Firestar
Do not archive
l
On May 15, 2009, at 7:31 PM, JetPilot wrote:
>
> Pictures attached...
>
> --------
> "NO FEAR" - If you have no fear you did not go as fast as
> you could have !!!
>
> Kolb MK-III Xtra, 912-S
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=244229#244229
>
>
> Attachments:
>
> http://forums.matronics.com//files/kolbsmv_172.jpg
> http://forums.matronics.com//files/kolbsmvflying_121.jpg
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Gang,
John B, Bruce C, Mike Marker and John Hauck are all here. The wind
has made it very interesting, hope that it will calm down so that we can
do some serious flying.
Larry C
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 582 Gearbox Choices |
I found a good deal on a Rotax 582 for my Mark III project, but don't know which
gearbox to pick. I definitely want electric start. Will an B, C, or E box
work equally well on a Mark III? I've heard that I can only use a B box or I'll
have to raise the engine mounts and the thrust line may be too high. Those
of you who have (or had) 582's, what gearbox are you using and what gear ratio?
Thanks.
Mark Rinehart
Indianapolis Mark III project
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rotax 582 Gearbox Choices |
Mark, The B box has some limits on which props you can use. Its allowable
prop inertia is half that of the C and E boxes. I have a C box with a 4:00
to 1 ratio. It requires nothing special to mount and has clearance for a 68"
prop.
Rick
On Tue, May 19, 2009 at 4:51 PM, mark rinehart <capt_riney@yahoo.com> wrote:
>
>
> I found a good deal on a Rotax 582 for my Mark III project, but don't know
> which gearbox to pick. I definitely want electric start. Will an B, C, or
> E box work equally well on a Mark III? I've heard that I can only use a B
> box or I'll have to raise the engine mounts and the thrust line may be too
> high. Those of you who have (or had) 582's, what gearbox are you using and
> what gear ratio? Thanks.
>
> Mark Rinehart
> Indianapolis Mark III project
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 582 Gearbox Choices |
582 E-Box 2:62 with Warp Drive 66" Pitched at 9.75 Degrees on Kolb MK III
Classic.
-----Original Message-----
From: owner-kolb-list-server@matronics.com
[mailto:owner-kolb-list-server@matronics.com]On Behalf Of mark rinehart
Sent: Tuesday, May 19, 2009 5:51 PM
Subject: Kolb-List: Rotax 582 Gearbox Choices
I found a good deal on a Rotax 582 for my Mark III project, but don't know
which gearbox to pick. I definitely want electric start. Will an B, C, or
E box work equally well on a Mark III? I've heard that I can only use a B
box or I'll have to raise the engine mounts and the thrust line may be too
high. Those of you who have (or had) 582's, what gearbox are you using and
what gear ratio? Thanks.
Mark Rinehart
Indianapolis Mark III project
Checked by AVG - http://www.avg.com
06:21:00
--
We are a community of 6 million users fighting spam.
The Professional version does not have this message
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
<<DSC_1976.JPG>> <<DSC_1983.JPG>> WOW! What a great turn out! No
breakfast next year I will not go to mv again in a truck and trailer. No
room in the plane for the grill. Thanks for the bed time stories Popa
Larry.
Great rabbit!!!!!!!!!!!!!!!
Uncle craig
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Gaggle of 5 in Sherman, TX |
Well Frank it was nice meeting you, I gotta give you credit as someone that done
that long trip to Harlingen towing a trailer.
Ron @ KFHU
================
---- "frank.goodnight" <frank.goodnight@att.net> wrote:
============
Hi everybody,
Just got back from my first trip to MV , 2874 miles by trailer. I flew
for almost 5 Hrs.while
i was there , met several of the people that use the kolb-list, and
learned quite a bit about
my airplane [a couple of things I had done wrong when I built it].
Also had several Firsts -
first time I ever operated from anything other than sea level- first
tailwind landing-first time
landing or tacking off up or downhill-also the first time I ever flew
where there was much
thermal activity.There were some very pretty airplanes .One poor guy
had about as much
bad luck as a person can have [ on his whole trip ] no one hurt. I"ll
let him , or someone
else write about that. All in all I had more fun than I"ve had in a
lot of years, much more
than a 68 year old should have. I felt like a kid again with new and
exciteing things to do.
I hope I can talk my wife into going next year.
Frank Goodnight
Firestar
Do not archive
l
On May 15, 2009, at 7:31 PM, JetPilot wrote:
>
> Pictures attached...
>
> --------
> "NO FEAR" - If you have no fear you did not go as fast as
> you could have !!!
>
> Kolb MK-III Xtra, 912-S
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=244229#244229
>
>
> Attachments:
>
> http://forums.matronics.com//files/kolbsmv_172.jpg
> http://forums.matronics.com//files/kolbsmvflying_121.jpg
>
>
--
kugelair.com
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Winds aloft forecast for Wednesday thru Friday is for south-westerlies under 15
kts all the way up to 9000ft. Looks pretty good. The truck is loaded, trailer
hooked up, and suitcase packed. I'll see ya when I get there.....
--------
Roger in Oregon
1992 KXP 503 - N1782C
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=244744#244744
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|