Kolb-List Digest Archive

Fri 07/24/09


Total Messages Posted: 17



Today's Message Index:
----------------------
 
     1. 09:01 AM - swivel tailwheel for Kolbs (Thom Riddle)
     2. 09:20 AM - Re: swivel tailwheel for Kolbs (John Hauck)
     3. 09:32 AM - New Video of Kolb Flying Formation with Ultralight Trikes (JetPilot)
     4. 09:34 AM - Re: swivel tailwheel for Kolbs (Thom Riddle)
     5. 09:38 AM - Re: swivel tailwheel for Kolbs (Thom Riddle)
     6. 09:57 AM - Re: swivel tailwheel for Kolbs (Dana Hague)
     7. 09:57 AM - Re: swivel tailwheel for Kolbs (Dana Hague)
     8. 10:13 AM - Re: swivel tailwheel for Kolbs (Thom Riddle)
     9. 11:02 AM - Slingshot questions (Thom Riddle)
    10. 02:54 PM - New Camera, Owyhee Ramblins (Larry Cottrell)
    11. 03:13 PM - Re: New Camera, Owyhee Ramblins (Robert Laird)
    12. 04:14 PM - Re: New Camera, Owyhee Ramblins (Larry Cottrell)
    13. 04:18 PM - Re: New Camera, Owyhee ramblins (william sullivan)
    14. 05:04 PM - Re: New Camera, Owyhee Ramblins (John Hauck)
    15. 06:13 PM - Re: New Camera, Owyhee Ramblins (Larry Cottrell)
    16. 06:36 PM - Re: New Video of Kolb Flying Formation with Ultralight Trikes (ces308)
    17. 06:47 PM - FINALLY !!! (ces308)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:01:56 AM PST US
    Subject: swivel tailwheel for Kolbs
    From: "Thom Riddle" <riddletr@gmail.com>
    If any on you with standard Kolb tailwheels have been thinking about moving to a swivel tailwheel, I have one ready to bolt-on to the standard Kolb tailwheel stinger. It is a 4" diameter full swivel with some use mostly on grass but in perfect working order with only a little wear on the rubber. A new one is $288.95 from Aircraft Spruce. I'll sell mine for a lot less. This one came off of BB's MkIII when he went to a 6 inch wheel. He sold it to me for my FS but after breaking the FS and selling the remains, I no longer need the swivel tailwheel. The SS I'm buying has one already. If you are interested, make me a reasonable offer. Contact me off-list, directly via email. do not archive -------- Thom Riddle Buffalo, NY http://riddletr.googlepages.com/sportpilot-cfi http://riddletr.googlepages.com/a%26pmechanix A complex system that works is invariably found to have evolved from a simple system that works. - John Gaule Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254580#254580


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:20:27 AM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Re: swivel tailwheel for Kolbs
    I no longer need the swivel tailwheel. The SS I'm buying has one already. > > Thom Riddle May want to hang on to it. Sling Shots have a lot of weight on the tailwheel, similar to what I deal with on my mkIII. If you fly a lot, it may wear out sooner than you expect. john h mkIII


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:32:26 AM PST US
    Subject: New Video of Kolb Flying Formation with Ultralight Trikes
    From: "JetPilot" <orcabonita@hotmail.com>
    Here is a new video of me flying with some ultralight trikes in my Kolb MK III Xtra. As always with YouTube, the video quality will be horrible unless you click the HD button on the bottom right of the video. http://www.youtube.com/watch?v=5w9Ya8GwZ8I Mike -------- &quot;NO FEAR&quot; - If you have no fear you did not go as fast as you could have !!! Kolb MK-III Xtra, 912-S Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254586#254586


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:34:20 AM PST US
    Subject: Re: swivel tailwheel for Kolbs
    From: "Thom Riddle" <riddletr@gmail.com>
    John, Luray already replaced the stinger type tailwheel with a leaf spring tailwheel (6" I think), so it should be good for awhile. The wheels are replaceable. Attached is a photo of the one on Luray's SS. -------- Thom Riddle Buffalo, NY http://riddletr.googlepages.com/sportpilot-cfi http://riddletr.googlepages.com/a%26pmechanix A complex system that works is invariably found to have evolved from a simple system that works. - John Gaule Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254587#254587


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:38:02 AM PST US
    Subject: Re: swivel tailwheel for Kolbs
    From: "Thom Riddle" <riddletr@gmail.com>
    Ooops! Forgot the attached photo. Here it is. -------- Thom Riddle Buffalo, NY http://riddletr.googlepages.com/sportpilot-cfi http://riddletr.googlepages.com/a%26pmechanix A complex system that works is invariably found to have evolved from a simple system that works. - John Gaule Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254589#254589 Attachments: http://forums.matronics.com//files/tailwheel_lower_res_202.jpg


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:57:15 AM PST US
    From: Dana Hague <d-m-hague@comcast.net>
    Subject: Re: swivel tailwheel for Kolbs
    At 12:01 PM 7/24/2009, Thom Riddle wrote: > >If any on you with standard Kolb tailwheels have been thinking about >moving to a swivel tailwheel, I have one ready to bolt-on to the standard >Kolb tailwheel stinger. It is a 4" diameter full swivel with some use >mostly on grass but in perfect working order with only a little wear on >the rubber. A new one is $288.95 from Aircraft Spruce. I'll sell mine for >a lot less.... Thom, do you have a picture of it, and know how much it weighs? I'm wondering if it would be too big or heavy for my UltraStar... -Dana -- Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.-- Albert Einstein


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:57:15 AM PST US
    From: Dana Hague <d-m-hague@comcast.net>
    Subject: Re: swivel tailwheel for Kolbs
    At 12:01 PM 7/24/2009, Thom Riddle wrote: > >If any on you with standard Kolb tailwheels have been thinking about >moving to a swivel tailwheel, I have one ready to bolt-on to the standard >Kolb tailwheel stinger. It is a 4" diameter full swivel with some use >mostly on grass but in perfect working order with only a little wear on >the rubber. A new one is $288.95 from Aircraft Spruce. I'll sell mine for >a lot less.... Thom, do you have a picture of it, and know how much it weighs? I'm wondering if it would be too big or heavy for my UltraStar... -Dana -- Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.-- Albert Einstein


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:13:17 AM PST US
    Subject: Re: swivel tailwheel for Kolbs
    From: "Thom Riddle" <riddletr@gmail.com>
    Dana, I don't have a photo and have not weighed it, yet. Next time I go to the hangar, I'll bring it home, weight it and shoot a photo of it. This much I can tell you for certain: it is a good bit heavier than the standard Kolb tailwheel but it sure improves ground handling. How close to aft CG limit are you? If you are very close, it could be iffy. I'll let you know its weight as soon as I know it. -------- Thom Riddle Buffalo, NY http://riddletr.googlepages.com/sportpilot-cfi http://riddletr.googlepages.com/a%26pmechanix A complex system that works is invariably found to have evolved from a simple system that works. - John Gaule Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254592#254592


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:02:10 AM PST US
    Subject: Slingshot questions
    From: "Thom Riddle" <riddletr@gmail.com>
    I have a few Slingshot questions for the few SS pilots on the list or anyone who knows: 1) What size main tires are considered standard on the Slingshot? Luray's has 800x6 which seem to be a bit overkill unless you operate on pretty rough fields. 2) Is the standard SS tail wheel a full swivel or like the FS and FF and what diameter is it? 3) What is the correct Vne for the Slingshot? I've seen several numbers ranging from 110 mph to 125 mph. Luray's ASI is redline marked at 110 mph. Thanks for whatever info you can provide. -------- Thom Riddle Buffalo, NY http://riddletr.googlepages.com/sportpilot-cfi http://riddletr.googlepages.com/a%26pmechanix A complex system that works is invariably found to have evolved from a simple system that works. - John Gaule Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254596#254596


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:54:01 PM PST US
    From: "Larry Cottrell" <lcottrell@fmtcblue.com>
    Subject: New Camera, Owyhee Ramblins
    I made a trip down the Owyhee River this morning and when I got back from the two hour flight, and viewed the video, found that I had a blemish on the camera lens. I attempted to clean the lens and was unable to do so. I managed to drop it the other day when I took it off the mount to obtain pictures to send to the list. I can only assume that the damage occurred when it hit the concrete. So I would caution those of you who bought one, to hold on to it. :-) The blemish is visible, will have to decide whether to buy another one, or put up with this. http://www.youtube.com/watch?v=tdZQROfnJRI Most of this has been done by me before, but there are two bands of Bighorn Sheep in this one, and I never get that tired of the scenery down there. Larry


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:13:54 PM PST US
    Subject: Re: New Camera, Owyhee Ramblins
    From: Robert Laird <rlaird@cavediver.com>
    Have you tried a q-tip? (I -just- got mine in the mail!) On Fri, Jul 24, 2009 at 4:45 PM, Larry Cottrell <lcottrell@fmtcblue.com>wrote: > I made a trip down the Owyhee River this morning and when I got back > from the two hour flight, and viewed the video, found that I had a blemish > on the camera lens. I attempted to clean the lens and was unable to do so. I > managed to drop it the other day when I took it off the mount to obtain > pictures to send to the list. I can only assume that the damage occurred > when it hit the concrete. So I would caution those of you who bought one, to > hold on to it. :-) The blemish is visible, will have to decide whether to > buy another one, or put up with this. > > http://www.youtube.com/watch?v=tdZQROfnJRI > > Most of this has been done by me before, but there are two bands of Bighorn > Sheep in this one, and I never get that tired of the scenery down there. > Larry > > ** > >


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:14:25 PM PST US
    From: "Larry Cottrell" <lcottrell@fmtcblue.com>
    Subject: Re: New Camera, Owyhee Ramblins
    Yep, q tips, tooth picks with cotton, tee shirts and glass cleaner, the works. Appears to be permanent. Sigh! Larry ----- Original Message ----- From: Robert Laird To: kolb-list@matronics.com Sent: Friday, July 24, 2009 3:57 PM Subject: Re: Kolb-List: New Camera, Owyhee Ramblins Have you tried a q-tip? (I -just- got mine in the mail!) On Fri, Jul 24, 2009 at 4:45 PM, Larry Cottrell <lcottrell@fmtcblue.com> wrote: I made a trip down the Owyhee River this morning and when I got back from the two hour flight, and viewed the video, found that I had a blemish on the camera lens. I attempted to clean the lens and was unable to do so. I managed to drop it the other day when I took it off the mount to obtain pictures to send to the list. I can only assume that the damage occurred when it hit the concrete. So I would caution those of you who bought one, to hold on to it. :-) The blemish is visible, will have to decide whether to buy another one, or put up with this. http://www.youtube.com/watch?v=tdZQROfnJRI Most of this has been done by me before, but there are two bands of Bighorn Sheep in this one, and I never get that tired of the scenery down there. Larry ------------------------------------------------------------------------- ----- Checked by AVG - www.avg.com 07/24/09 18:24:00


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:18:13 PM PST US
    From: william sullivan <williamtsullivan@att.net>
    Subject: Re: New Camera, Owyhee ramblins
    - Larry- You might be able to buff out the scratch with a Demel felt tip -and jeweler's rouge.- It worked for my son-in-law when he scraped an e xpensive window with a roofing shingle.- Go slow, and clean often to insp ect.- If it's just on the surface it will clean right up. - Great video from such an inexpensive camera.- Better off dropping a $ 50 one than a $300 one. - The added music was not allowed by WMG (?).- Keep them coming, and th anks. - ------------------------- ------------------ Bill Sullivan ------------------------- ------------------ Windsor Locks, Ct. -


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:04:03 PM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Re: New Camera, Owyhee Ramblins
    Heck, I've flown my mkIII and ridden my Honda Rincon right down that pig trail to the line shack by the Owyhee!!! Hope to do it again real soon. Sure looks good! john h mkIII Most of this has been done by me before, but there are two bands of Bighorn Sheep in this one, and I never get that tired of the scenery down there. Larry


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:13:13 PM PST US
    From: "Larry Cottrell" <lcottrell@fmtcblue.com>
    Subject: Re: New Camera, Owyhee Ramblins
    When I posted the video, I had put some Earl Klugh and Enya music as a sound track, but You Tube informed me that there was some copy write infringment and gave me the choice of replacing it with their music that they owned. I tried sever times, with little sucess, then I found one that seemed to take, but it is a little short, so when the music shuts off, hum a little till it quits. Larry


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:25 PM PST US
    Subject: Re: New Video of Kolb Flying Formation with Ultralight Trikes
    From: "ces308" <ces308@ldaco.com>
    Mike ! Looks Great ! I Love watching these things fly ! Keep them coming !! chris ambrose M3X/Jab 40.0 HRS N327CS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254640#254640


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:47:00 PM PST US
    Subject: FINALLY !!!
    From: "ces308" <ces308@ldaco.com>
    Well guys,I did it ! I turned the clock over to 40.0 hrs today so I can sign off my airplane to to start going somewhere !!!! Look OUT !!! LOL chris ambrose M3X/Jab 40.0 hrs N327CS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=254641#254641 Attachments: http://forums.matronics.com//files/m3xinflight_154.jpg




    Other Matronics Email List Services

  • Post A New Message
  •   kolb-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kolb-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kolb-list
  • Browse Kolb-List Digests
  •   http://www.matronics.com/digest/kolb-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --