---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Fri 06/25/10: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:02 AM - Re: Kolb-List Digest: 5 Msgs - 06/24/10 (Bob Green) 2. 07:35 AM - Re: Re: Kolb-List Digest: 5 Msgs - 06/24/10 (John Hauck) 3. 09:01 AM - Re: Kolb-List Digest: 5 Msgs - 06/24/10 (George Bearden) 4. 07:42 PM - Full Moon (Eugene Zimmerman) 5. 07:50 PM - Re: Full Moon (John Hauck) 6. 08:41 PM - Re: Full Moon (chris davis) ________________________________ Message 1 _____________________________________ Time: 07:02:53 AM PST US From: Bob Green Subject: Kolb-List: RE: Kolb-List Digest: 5 Msgs - 06/24/10 Concerning the installation of the "H" bracket in the boom tube: I preferred not to clamp or put bending pressure on the outside of boom tube... What I did was put the "H" bracket in place and using either 1" or 2" think boards I placed one on the top leg of the "H" bracket and the other on the opposite leg. I then pushed a wedge shaped 2x4 between the two flat boards causing the two bracket legs to flex to a tight fit against the inner walls of the tube. Not much pressure was required and this insured a snug fit between the two ("H" bracket and boom tube) for riveting purposes. As Richard Pike says... "For what it is worth"... Bob ________________________________ Message 2 _____________________________________ Time: 07:35:07 AM PST US From: "John Hauck" Subject: Re: Kolb-List: RE: Kolb-List Digest: 5 Msgs - 06/24/10 > Concerning the installation of the "H" bracket in the boom tube: I > preferred not to clamp or put bending pressure on the outside of boom > tube... > Bob Cabinet maker's/carpenter's wooden clamps work well. Only slight pressure is required to get the job done. john h mkIII ________________________________ Message 3 _____________________________________ Time: 09:01:55 AM PST US From: "George Bearden" Subject: Kolb-List: RE: Kolb-List Digest: 5 Msgs - 06/24/10 >The best way to exactly match rivet holes and reuse the H-section is to make a paper tube template. I shouldn't even pipe up as I am not a pilot and don't have a Kolb. However, fine points of etiquette have always escaped me so... I have JUST retired after a long and glorious career in GIS. Think automated mapping, spatial analysis, aerial photos, GPS, HUGE plotters and scanners. We quit using paper for critical drawings years ago as it is not dimensionally stable. Paper stretches, humidity affects it, John down the hall leaves it lying around with coffee stains... Maybe use mylar, eh? GeoB ________________________________ Message 4 _____________________________________ Time: 07:42:00 PM PST US From: Eugene Zimmerman Subject: Kolb-List: Full Moon My wife took this picture of me on final approach Friday evening. ________________________________ Message 5 _____________________________________ Time: 07:50:32 PM PST US From: "John Hauck" Subject: Re: Kolb-List: Full Moon From: "Eugene Zimmerman" > My wife took this picture of me on final approach Friday evening. Nice, unusual photo. john h mkIII ________________________________ Message 6 _____________________________________ Time: 08:41:14 PM PST US From: chris davis Subject: Re: Kolb-List: Full Moon Nice Pic ! Makesme jealous. C. Chris Davis KXP 503 492 hrs Glider Pilot Disabled from crash building Firefly ----- Original Message ---- From: Eugene Zimmerman Sent: Fri, June 25, 2010 10:41:12 PM Subject: Kolb-List: Full Moon My wife took this picture of me on final approach Friday evening. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.