Kolb-List Digest Archive

Wed 08/18/10


Total Messages Posted: 14



Today's Message Index:
----------------------
 
     1. 02:01 AM - Re: using the Stewarts system (Richard Girard)
     2. 07:22 AM - VGs (zeprep251@aol.com)
     3. 09:27 AM - Re: using the Stewarts system (GARY JINDRA)
     4. 12:43 PM - MkIII seats (Mike Welch)
     5. 02:02 PM - Re: MkIII seats (Mike Welch)
     6. 03:38 PM - Re: VGs (ces308)
     7. 04:42 PM - Re: using the Stewarts system (Richard Girard)
     8. 04:47 PM - Re: MkIII seats (Richard Girard)
     9. 05:29 PM - Re: MkIII seats (Mike Welch)
    10. 06:01 PM - Re: using the Stewarts system (GARY JINDRA)
    11. 06:13 PM - Re: MkIII seats (Jerry Deckard)
    12. 06:36 PM - Re: MkIII seats (Ellery Batchelder Jr)
    13. 07:43 PM - Re: using the Stewarts system (Richard Girard)
    14. 08:35 PM - Re: Another newbie question: (ces308)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:01:55 AM PST US
    Subject: Re: using the Stewarts system
    From: Richard Girard <aslsa.rng@gmail.com>
    Beautiful work, Gary. If you don't mind a suggestion from a 582 powered Mk IIIC owner/flyer, put in a one piece larger fuel tank now, if you can. 10 gallons is barely two hours of flight time with no reserve. It really puts a damper on leaving the pattern to enjoy your airplane. I'm sure Hauck will validate this view point. I know it's on my list for this winter when I recover the fuselage of mine. None of my business, but does "into our house" imply a spouse? If so, you are one lucky man. :-} Rick Girard Zulu Delta Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM On Tue, Aug 17, 2010 at 11:06 PM, GARY JINDRA <gajindra@sbcglobal.net>wrote: > I am using Stewarts water bourne system to cover my mark 111c .I bought a > Kolb kit that had been started and the fellow quit on it.Stewarts is faa > approved and has no toxic fumes,also been around awhile.Glues will stay > tacky and the cloth easy to work with and moved around till glue is recoated > over seams or joints.Moved the plane into our house after New Years to do > the covering.Double doors on front of house.Attached is a couple pics.Also > did uv protection in the livingroom.Cost may be little higher but no toxic > fumes to inhale or handle.The furnace never had to be turned off.No fumes! > Gary Jindra > Mark 111c > 582 E-box > building >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:22:24 AM PST US
    Subject: VGs
    From: zeprep251@aol.com
    Will Tatham, If you are still lurking on the list,what brand of VGs made it to the wing on your MK-3? Thanx,G.Aman


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:27:54 AM PST US
    From: GARY JINDRA <gajindra@sbcglobal.net>
    Subject: Re: using the Stewarts system
    Thanks Rick,I have put Kolbs 6 gallon tanks in the plane.By raising the roo f line in the back and putting a removable lexan window I can change out th e tanks if need be.It also gave some storagebehind the tanks on an aluminum shelf across the upper tank framing that extends to the back.And yes there is a wife and she has been a great help and supporter of the project. Gary JindraMark 111c 582 e-box building --- OMn Wed, 8/18/10, Richard Girard <aslsa.rng@gmail.com> wrote: From: Richard Girard <aslsa.rng@gmail.com> Subject: Re: Kolb-List: using the Stewarts system Beautiful work, Gary. If you don't mind a suggestion from a 582 powered Mk IIIC owner/flyer, put in a one piece larger fuel tank now, if you can. 10 g allons is barely two hours of flight time with no reserve. It really puts a damper on leaving the pattern to enjoy your airplane. I'm sure Hauck will validate this view point. I know it's on my list for this winter when I rec over the fuselage of mine. None of my business, but does "into our house" imply a spouse? If so, you a re one lucky man. :-} Rick Girard Zulu Delta Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM On Tue, Aug 17, 2010 at 11:06 PM, GARY JINDRA <gajindra@sbcglobal.net> wrot e: I am using Stewarts water bourne system to cover my mark 111c .I bought a K olb- kit that had been started and the fellow quit on it.Stewarts is faa approved and has no toxic fumes,also been around awhile.Glues will stay tac ky and the cloth easy to work with and moved around till glue is recoated o ver seams or joints.Moved the plane into our house after New Years to do th e covering.Double doors on front of house.Attached is a couple pics.Also di d uv protection in the livingroom.Cost may be little higher but no toxic fu mes to inhale or handle.The furnace never had to be turned off.No fumes!- Gary Jindra Mark 111c 582 E-box building---------------------- ------


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:43:05 PM PST US
    From: Mike Welch <mdnanwelch7@hotmail.com>
    Subject: MkIII seats
    Kolb guys=2C Around three months ago someone posted some photos of their tubular frame seats in a MkIII. I thought I saved the photos=2C but can't find them anywhere. If you know who I'm referring to=2C could you send me an email and give m e the date of the posting(s)? I guess I still have the original message in my in box=2C I just don't know where. Thanks=2C Mike Welch


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:02:50 PM PST US
    From: Mike Welch <mdnanwelch7@hotmail.com>
    Subject: MkIII seats
    Re: my last request.....nevermind=2C I found it. It was a link to "Kilocha rlie's" website. Mike W From: mdnanwelch7@hotmail.com Subject: Kolb-List: MkIII seats Kolb guys=2C Around three months ago someone posted some photos of their tubular frame seats in a MkIII. I thought I saved the photos=2C but can't find them anywhere. If you know who I'm referring to=2C could you send me an email and give m e the date of the posting(s)? I guess I still have the original message in my in box=2C I just don't know where. Thanks=2C Mike Welch


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:38:21 PM PST US
    Subject: Re: VGs
    From: "ces308" <ces308@ldaco.com>
    Gary, I put the AIR WAVE VG's on mine,,,....$50.00 for a box of 100....I put I think ,96 on the wing and 68 I believe it was on the tail...vertical and horizontal... chris ambrose M3X/Jabiru 143.8 hrs N327CS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=309321#309321


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:42:43 PM PST US
    Subject: Re: using the Stewarts system
    From: Richard Girard <aslsa.rng@gmail.com>
    Gary, Send her flowers often, she's a real keeper. :-} Where are you located? I keep hoping I'll find a fellow Kolber in Kansas, it's lonely here in the Air Capitol. Rick On Wed, Aug 18, 2010 at 11:19 AM, GARY JINDRA <gajindra@sbcglobal.net>wrote: > Thanks Rick,I have put Kolbs 6 gallon tanks in the plane.By raising the > roof line in the back and putting a removable lexan window I can change out > the tanks if need be.It also gave some storagebehind the tanks on an > aluminum shelf across the upper tank framing that extends to the back.And > yes there is a wife and she has been a great help and supporter of the > project. > > *Gary Jindra* > Mark 111c > 582 e-box building > --- OMn *Wed, 8/18/10, Richard Girard <aslsa.rng@gmail.com>* wrote: > > > From: Richard Girard <aslsa.rng@gmail.com> > Subject: Re: Kolb-List: using the Stewarts system > To: kolb-list@matronics.com > Date: Wednesday, August 18, 2010, 5:01 AM > > Beautiful work, Gary. If you don't mind a suggestion from a 582 powered Mk > IIIC owner/flyer, put in a one piece larger fuel tank now, if you can. 10 > gallons is barely two hours of flight time with no reserve. It really puts a > damper on leaving the pattern to enjoy your airplane. I'm sure Hauck will > validate this view point. I know it's on my list for this winter when I > recover the fuselage of mine. > None of my business, but does "into our house" imply a spouse? If so, you > are one lucky man. :-} > > Rick Girard > Zulu Delta > Mk IIIC > 582 Gray head > 4.00 C gearbox > 3 blade WD > Thanks, Homer GBYM > > > On Tue, Aug 17, 2010 at 11:06 PM, GARY JINDRA <gajindra@sbcglobal.net<http://us.mc828.mail.yahoo.com/mc/compose?to=gajindra@sbcglobal.net> > > wrote: > > I am using Stewarts water bourne system to cover my mark 111c .I bought > a Kolb kit that had been started and the fellow quit on it.Stewarts is faa > approved and has no toxic fumes,also been around awhile.Glues will stay > tacky and the cloth easy to work with and moved around till glue is recoated > over seams or joints.Moved the plane into our house after New Years to do > the covering.Double doors on front of house.Attached is a couple pics.Also > did uv protection in the livingroom.Cost may be little higher but no toxic > fumes to inhale or handle.The furnace never had to be turned off.No fumes! > Gary Jindra > Mark 111c > 582 E-box > building > > > * > > =nofollow target=_blank>http://www.matronics.com/Navigator?Kolb-List > et=_blank>http://forums.matronics.com > llow target=_blank>http://www.matronics.com/contribution > * > > * > > * > > -- Zulu Delta Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:47:30 PM PST US
    Subject: Re: MkIII seats
    From: Richard Girard <aslsa.rng@gmail.com>
    Mike, Is this the photo? Rick On Wed, Aug 18, 2010 at 2:42 PM, Mike Welch <mdnanwelch7@hotmail.com> wrote: > Kolb guys, > > Around three months ago someone posted some photos of their tubular frame > seats > in a MkIII. I thought I saved the photos, but can't find them anywhere. > > If you know who I'm referring to, could you send me an email and give me > the > date of the posting(s)? I guess I still have the original message in my > inbox, I just don't know where. > > Thanks, Mike Welch > > * > > > * > > -- Zulu Delta Kolb Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:29:38 PM PST US
    From: Mike Welch <mdnanwelch7@hotmail.com>
    Subject: MkIII seats
    >Mike=2C Is this the photo? >Rick Yes=2C it is=2C Rick. I sent a private message response=2C too. Thanks=2C Mike


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:01:25 PM PST US
    From: GARY JINDRA <gajindra@sbcglobal.net>
    Subject: Re: using the Stewarts system
    Rick I will be flying out of Mayfield airport 1D4-in Akron,Ohio same as G ary Aman does in - the summer Gary Jindra Mark 111c 582 e-box building ------------------------- - =nofollow target=_blank>http://www.matronics.com/Navigator?Kolb-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- Zulu Delta Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:13:43 PM PST US
    From: "Jerry Deckard" <flypoker@windstream.net>
    Subject: Re: MkIII seats
    Looks a lot like the seats in my Rans S12 Jerry ----- Original Message ----- From: Richard Girard To: kolb-list@matronics.com Sent: Wednesday, August 18, 2010 6:46 PM Subject: Re: Kolb-List: MkIII seats Mike, Is this the photo? Rick On Wed, Aug 18, 2010 at 2:42 PM, Mike Welch <mdnanwelch7@hotmail.com> wrote: Kolb guys, Around three months ago someone posted some photos of their tubular frame seats in a MkIII. I thought I saved the photos, but can't find them anywhere. If you know who I'm referring to, could you send me an email and give me the date of the posting(s)? I guess I still have the original message in my inbox, I just don't know where. Thanks, Mike Welch get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- Zulu Delta Kolb Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:21 PM PST US
    Subject: Re: MkIII seats
    From: Ellery Batchelder Jr <elleryweld@aol.com>
    That seat is out of a Rans S-6 you can probably buy them direct from them Ellery Batchelder Jr. -----Original Message----- From: Richard Girard <aslsa.rng@gmail.com> Sent: Wed, Aug 18, 2010 7:46 pm Subject: Re: Kolb-List: MkIII seats Mike, Is this the photo? Rick On Wed, Aug 18, 2010 at 2:42 PM, Mike Welch <mdnanwelch7@hotmail.com> wrot e: Kolb guys, Around three months ago someone posted some photos of their tubular fram e seats in a MkIII. I thought I saved the photos, but can't find them anywhere. If you know who I'm referring to, could you send me an email and give me the date of the posting(s)? I guess I still have the original message in my inbox, I just don't know where. Thanks, Mike Welch get="_blank">http://www.matronics.com/Navigator?Kolb-List p://forums.matronics.com blank">http://www.matronics.com/contribution -- Zulu Delta Kolb Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:43:43 PM PST US
    Subject: Re: using the Stewarts system
    From: Richard Girard <aslsa.rng@gmail.com>
    Any lurkers out there located on the Great Plains? Someone west of the Missouri River must own and fly a Kolb. Rick On Wed, Aug 18, 2010 at 8:00 PM, GARY JINDRA <gajindra@sbcglobal.net> wrote: > Rick I will be flying out of Mayfield airport 1D4 in Akron,Ohio same as > Gary Aman does in > the summer > > *Gary Jindra* > *Mark 111c* > 582 e-box > building > > > * > > =nofollow target=_blank>http://www.matronics.com/Navigator?Kolb-List > > et=_blank>http://forums.matronics.com > llow target=_blank>http://www.matronics.com/contribution > * > > * > > get="_blank">http://www.matronics.com/Navigator?Kolb-List > tp://forums.matronics.com > > _blank">http://www.matronics.com/contribution > * > > > -- > Zulu Delta > Mk IIIC > 582 Gray head > 4.00 C gearbox > 3 blade WD > Thanks, Homer GBYM > > > * > > =nofollow target=_blank>http://www.matronics.com/Navigator?Kolb-List > > et=_blank>http://forums.matronics.com > llow target=_blank>http://www.matronics.com/contribution > * > > * > > * > > -- Zulu Delta Kolb Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:35:44 PM PST US
    Subject: Re: Another newbie question:
    From: "ces308" <ces308@ldaco.com>
    ...I was taught in ground school that when you fly from a HIGH to a Low ,to look out below..... chris ambrose M3X/Jabiru A-2200 143.8 hrs n327CS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=309352#309352




    Other Matronics Email List Services

  • Post A New Message
  •   kolb-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kolb-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kolb-list
  • Browse Kolb-List Digests
  •   http://www.matronics.com/digest/kolb-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --