Kolb-List Digest Archive

Mon 09/20/10


Total Messages Posted: 15



Today's Message Index:
----------------------
 
     1. 02:56 AM - Re: Re: kolb stall (Dana Hague)
     2. 04:13 AM - Re: airspeed indicator calibration (George Alexander)
     3. 05:39 AM - Re: Kolb-List Digest: 10 Msgs - 09/18/10 (Thom Riddle)
     4. 06:10 AM - Re: Re: Kolb-List Digest: 10 Msgs - 09/18/10 (Richard Girard)
     5. 06:25 AM - Re: Kolb-List Digest: 10 Msgs - 09/18/10 (Thom Riddle)
     6. 06:36 AM - Re: Kolb-List Digest: 10 Msgs - 09/18/10 (Thom Riddle)
     7. 07:43 AM - Re: Re: kolb stall (John Hauck)
     8. 08:40 AM - 582 exhaust leak (carlisle)
     9. 10:56 AM - 582 exhaust leak (carlisle)
    10. 10:58 AM - Re: 582 exhaust leak (carlisle)
    11. 10:58 AM - Re: 582 exhaust leak (carlisle)
    12. 11:05 AM - Re: 582 exhaust leak (John Hauck)
    13. 12:51 PM - Re: Re: airspeed indicator calibration (Ron Hoyt)
    14. 01:06 PM - rock house visit (b young)
    15. 10:04 PM - Re: Re: kolb stall (gtaylor)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:56:39 AM PST US
    From: Dana Hague <d-m-hague@comcast.net>
    Subject: Re: kolb stall
    Matt is the list owner. However, there is no need to contact him to make a search; the list website has a good search function and you'll find all you ever wanted to know (and then some!) on the subject of VG's. -Dana -------------------------------------------------- "gtaylor" <gtaylor35918@roadrunner.com> wrote: (09/20/2010 01:57) > > I'm not sure who Matt is, I am new to the list


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:13:46 AM PST US
    Subject: Re: airspeed indicator calibration
    From: "George Alexander" <gtalexander@att.net>
    Richard Pike wrote: > > rrh(at)rrhoyt.com wrote: > > Here is a paper on calibrating Air speed. For initial flights the other > > comments on watching for the stall/takeoff are all you need. > > > > Ron > > > > > > > Great paper. It had a url for a downloadable Excel spread sheet but the link was broken. By any chance do you have a copy of that spread sheet? And if so, can you make it available? That would be a great resource. > > Richard Pike > MKIII N420P (420ldPoops) Richard et al: See if this has what you are looking for..... seems they moved it around. http://www.ntps.edu/information/downloads -------- George Alexander FS II R503 N709FS http://www.oh2fly.net Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313012#313012


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:39:04 AM PST US
    Subject: Re: Kolb-List Digest: 10 Msgs - 09/18/10
    From: "Thom Riddle" <riddletr@gmail.com>
    To Chris Norman - CEO of www.goflying.co Interesting marketing strategy you have. You start up a website that has nothing on it, send out emails to every pilot you can find on the internet inviting them to join YOUR greatest flying website in the universe (with nothing much on it yet) and then, have the gall to state the Matronics Lists, THE GO TO place for info on lots and lots of aviation subjects and technical help.... has no traffic or content??? I suspect your "year long development" won't amount to much but wish you luck with it nonetheless. You are welcome to leave Matronics... no one is barring the door. Are you planning to announce your departure to ALL the Matronics Lists? That should take you awhile. -------- Thom Riddle Buffalo, NY (9G0) Kolb Slingshot SS-021 Jabiru 2200A #1574 Tennessee Prop 64x32 Everyone is entitled to his own opinion, but not his own facts. Daniel Patrick Moynihan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313018#313018


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:10:48 AM PST US
    Subject: Re: Kolb-List Digest: 10 Msgs - 09/18/10
    From: Richard Girard <aslsa.rng@gmail.com>
    Thom, you should have used smaller words. His reding just isn't up to this level. Rick On Mon, Sep 20, 2010 at 7:35 AM, Thom Riddle <riddletr@gmail.com> wrote: > > To Chris Norman - CEO of www.goflying.co > > Interesting marketing strategy you have. You start up a website that has > nothing on it, send out emails to every pilot you can find on the interne t > inviting them to join YOUR greatest flying website in the universe (with > nothing much on it yet) and then, have the gall to state the Matronics > Lists, THE GO TO place for info on lots and lots of aviation subjects and > technical help.... has no traffic or content??? > > I suspect your "year long development" won't amount to much but wish you > luck with it nonetheless. You are welcome to leave Matronics... no one is > barring the door. > > Are you planning to announce your departure to ALL the Matronics Lists? > That should take you awhile. > > -------- > Thom Riddle > Buffalo, NY (9G0) > Kolb Slingshot SS-021 > Jabiru 2200A #1574 > Tennessee Prop 64x32 > > > =93Everyone is entitled to his own opinion, but not his own facts.=94 > Daniel Patrick Moynihan > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=313018#313018 > > =========== =========== =========== =========== > > -- Zulu Delta Kolb Mk IIIC 582 Gray head 4.00 C gearbox 3 blade WD Thanks, Homer GBYM It is not bigotry to be certain we are right; but it is bigotry to be unabl e to imagine how we might possibly have gone wrong. - G.K. Chesterton


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:25:57 AM PST US
    Subject: Re: Kolb-List Digest: 10 Msgs - 09/18/10
    From: "Thom Riddle" <riddletr@gmail.com>
    Rick, Next time I will break all my words in to sin gle syl la ble words like this. Per haps that will help. do not archive (or arc hive) -------- Thom Riddle Buffalo, NY (9G0) Kolb Slingshot SS-021 Jabiru 2200A #1574 Tennessee Prop 64x32 Everyone is entitled to his own opinion, but not his own facts. Daniel Patrick Moynihan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313025#313025


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:18 AM PST US
    Subject: Re: Kolb-List Digest: 10 Msgs - 09/18/10
    From: "Thom Riddle" <riddletr@gmail.com>
    Rick, Next time I will break all my words in to sin gle syl la bles like this. Per haps that will help. do not archive (or arc hive) -------- Thom Riddle Buffalo, NY (9G0) Kolb Slingshot SS-021 Jabiru 2200A #1574 Tennessee Prop 64x32 Everyone is entitled to his own opinion, but not his own facts. Daniel Patrick Moynihan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313027#313027


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:43:56 AM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Re: kolb stall
    sure enough on my first > go around the pattern I experienced it turning on final because I let my > airspeed get to high, I did what Mike said that he did when he experienced > it, and it came right out of it. > Thanks, Greg Greg/Gang: Did you install aileron counterbalance weights to prevent aileron flutter after you discovered it would flutter? If you get into flutter once without aileron counterbalance weights, you will probably get into it again without them. john h mkIII Rock House, OR


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:40:07 AM PST US
    Subject: 582 exhaust leak
    From: "carlisle" <carlisle_99@yahoo.com>
    Got my new Bluehead in and it runs smooth as silk. Thanks Rotax Rick in Florida for a beautiful engine. When assembling the exhaust, I used anti-seize compound on the spring knuckle joints which was probably a mistake. It all melts/blows away anyway and just makes a big mess in the engine compartment. It did however, show me a little leak where the exhaust man is attached to the first 90 deg fitting. While the engine's running, I can feel a little jet of hot exhaust spitting back towards the block. Anyone know of a better way to seal these spring loaded joints? Chris Carlisle Model 2, 582 (now Bluehead) Sioux Falls, SD Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313049#313049


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:56:01 AM PST US
    Subject: 582 exhaust leak
    From: "carlisle" <carlisle_99@yahoo.com>
    Got my new Bluehead in and it runs smooth as silk. Thanks Rotax Rick in Florida for a beautiful engine. When assembling the exhaust, I used anti-seize compound on the spring knuckle joints which was probably a mistake. It all melts/blows away anyway and just makes a big mess in the engine compartment. It did however, show me a little leak where the exhaust man is attached to the first 90 deg fitting. While the engine's running, I can feel a little jet of hot exhaust spitting back towards the block. Anyone know of a better way to seal these spring loaded joints? Chris Carlisle Model 2, 582 (now Bluehead) Sioux Falls, SD Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313071#313071


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:58:24 AM PST US
    Subject: Re: 582 exhaust leak
    From: "carlisle" <carlisle_99@yahoo.com>
    Oops. Sorry. Wrong forum. Hi to all you Kolb flyers. See you on the Kitfox list! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313073#313073


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:58:48 AM PST US
    Subject: Re: 582 exhaust leak
    From: "carlisle" <carlisle_99@yahoo.com>
    Oops. Sorry. Wrong forum. Hi to all you Kolb flyers. See you on the Kitfox list! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=313074#313074


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:05:17 AM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Re: 582 exhaust leak
    > Anyone know of a better way to seal these spring loaded joints? > > Chris Carlisle Chris C/Gang: To the best of my knowledge, the antiseize compound is applied for just that, to prevent seizing. My experience indicated the ball joints should be good enough fit to prevent leaking. I think it is normal for antiseize compound to be lost from the joints from exhaust gas heat. john h mkIII Rock House, OR


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:51:39 PM PST US
    From: Ron Hoyt <rrh@rrhoyt.com>
    Subject: Re: airspeed indicator calibration
    I think this is the spread sheet for the airspeed calculator. Ron On 9/19/2010 8:39 PM, Richard Pike wrote: > --> Kolb-List message posted by: "Richard Pike"<richard@bcchapel.org> > > > rrh(at)rrhoyt.com wrote: >> Here is a paper on calibrating Air speed. For initial flights the other >> comments on watching for the stall/takeoff are all you need. >> >> Ron >> >> > > > Great paper. It had a url for a downloadable Excel spread sheet but the link was broken. By any chance do you have a copy of that spread sheet? And if so, can you make it available? That would be a great resource. > > Richard Pike > MKIII N420P (420ldPoops) > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=312985#312985 > >


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:06:10 PM PST US
    From: "b young" <by0ung@brigham.net>
    Subject: rock house visit
    got back from the rock house and wanted to share some photos. Arrived on Monday picture is on the inside of the rock house,,,, the outside rocks looks the same but for the furnishings. Tues Larry and I flew to the Alvord and saw wild horses on the way back also on Tues we went rabbit hunting with the falcons. on Wed, I followed Larry to some of his favorite spots We landed at the Owyhee reservoir state airport on the way home we flew low,, well low for me,,, nosebleed altitude for Larry, over the Owyhee river on Thus we went rabbit hunting again then fishing in the Owyhee river. Fri, I flew home. this was the best vacation I had had for some time. thanks Larry and Karen Boyd mkIII


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:04:22 PM PST US
    From: "gtaylor" <gtaylor35918@roadrunner.com>
    Subject: Re: kolb stall
    I haven't istalled counter balances as of yet, but after that first time I did several more take off and landings and had no trouble. The big thing was letting the air speed get to high, after that first trip around the patch I watched the airspeed closer and had no further problems. Thanks, Greg ----- Original Message ----- From: "John Hauck" <jhauck@elmore.rr.com> Sent: Monday, September 20, 2010 10:20 AM Subject: Re: Kolb-List: Re: kolb stall > > > sure enough on my first >> go around the pattern I experienced it turning on final because I let my >> airspeed get to high, I did what Mike said that he did when he >> experienced it, and it came right out of it. >> Thanks, Greg > > > Greg/Gang: > > Did you install aileron counterbalance weights to prevent aileron flutter > after you discovered it would flutter? > > If you get into flutter once without aileron counterbalance weights, you > will probably get into it again without them. > > john h > mkIII > Rock House, OR > > >




    Other Matronics Email List Services

  • Post A New Message
  •   kolb-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kolb-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kolb-list
  • Browse Kolb-List Digests
  •   http://www.matronics.com/digest/kolb-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --