Kolb-List Digest Archive

Fri 10/08/10


Total Messages Posted: 9



Today's Message Index:
----------------------
 
     1. 03:56 AM - Kolb VW (Lanny Fetterman)
     2. 06:34 AM - Re: Kolb-List Digest: 7 Msgs - 10/07/10 (Bob Green)
     3. 08:40 AM - Landing at the Milaca (18Y) airport yesterday (Ralph B)
     4. 10:13 AM - Re: New to the Forum (Jason Omelchuck)
     5. 10:48 AM - Re: Re: New to the Forum (Joe A Lawson)
     6. 02:11 PM - Re: Brake report (gotime242)
     7. 02:52 PM - Re: Re: Brake report (Joe Lawson)
     8. 09:13 PM - Re: Brake report (Carolina Flyer)
     9. 09:43 PM - Re: landing video with no Kolb drop (Carolina Flyer)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:56:32 AM PST US
    From: Lanny Fetterman <donaho1@verizon.net>
    Subject: Kolb VW
    Craig, Very nice aircraft! I would like to hear what that VW sound like doing a fly by. 8-) Lanny FSII Do not archive


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:34:45 AM PST US
    From: Bob Green <bgreen@bimi.org>
    Subject: RE: Kolb-List Digest: 7 Msgs - 10/07/10
    Thanks for the posts Rick N. and Craig. I am still here and building slowly but surely. I worked last night on the baffles for the engine. To do a neat secure job is time consuming. You all have been a real help to me. I am still studying on what prop to use and where to get the exhaust/parts. Thanks for asking about me. Bob


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:40:17 AM PST US
    Subject: Landing at the Milaca (18Y) airport yesterday
    From: "Ralph B" <rstar447@gmail.com>
    I took my son for a ride in the Kolbra yesterday and he took a video of the landing from the back seat. See it here: http://www.youtube.com/watch?v=LONzyzD-se4 Ralph B -------- Ralph B Original Firestar 447 N91493 E-AB 1000 hours 23 years flying it Kolbra 912UL N20386 2 years flying it 120 hrs Read this topic online here: http://forums.matronics.com/viewtopic.php?p=315105#315105


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:13:17 AM PST US
    Subject: Re: New to the Forum
    From: "Jason Omelchuck" <jason@trek-tech.com>
    Are those tires the Nanco 21x12x8? Carolina Flyer wrote: > Hello Everyone, > I am so glad I ran across this Forum..... There is a wealth of knowledge here, and some awesome pictures.... I have a Kolb Firestar II that I bought that I found on Barnstormers..... It had a few things that needed intention.... The Tail Wheel had broke off from a hard handing, and it damaged the elevator and rudder. Just the covering was damaged on the elevator, and the bottom of the rudder need the bottom tubing replaced. I have it almost finished, and just today I purchased a MicroAir 760 to install in a new dash I am working on... I did not like the drum brakes and I removed them and installed the Black Max 1000 system.... and to top it off I installed some wheel and tire combo that I have come up with...I have seen many people have the Carlisle golf cart tires on a 6" rim and call them Tundra Tires.... They are Heavy and Stiff, and the size is all I see that is close to being what is referred to as a Tundra Tire..... These Tires I have are Soft and only use between 5 and 10 pounds of air, and they are Light Weight........... They act like the Big Boys Tundra Tires in Alaska...... The Rims I have are 8" in Diameter, and fit on Black Max and Hegar wheel hubs, and maybe others..... Anyway I would like your input on what you think about my Tire and Wheel Combo........ > > > Kolb Firestar II > Rotax 503 with Electric Start > C-Box Re-Drive with a RK400 Clutch > 68" Warp Drive Prop > Black Max 1000 Hydraulic Brakes > Tundra Tires on 8" x 9" Aluminum Rims > Current in date BRS Ballistic Recovery Chute > Kuntzleman Dual Magnum Strobes > ELT (emergency locator transmitters) > N-Numbered with a current Annual done May 2010 > Soon to be Installed Micro Air 760 VHF TRANSCEIVER , > And maybe later a 3 Blade Prop, because they make less noise Read this topic online here: http://forums.matronics.com/viewtopic.php?p=315110#315110


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:48:59 AM PST US
    From: Joe A Lawson <joe.a.lawson@gmail.com>
    Subject: Re: New to the Forum
    Jason, Yes they are, do you use them as well...... Joe Sent from my iPhone On Oct 8, 2010, at 1:10 PM, "Jason Omelchuck" <jason@trek-tech.com> wrote: > > > > Are those tires the Nanco 21x12x8? > > > Carolina Flyer wrote: >> Hello Everyone, >> I am so glad I ran across this Forum..... There is a wealth of >> knowledge here, and some awesome pictures.... I have a Kolb >> Firestar II that I bought that I found on Barnstormers..... It had >> a few things that needed intention.... The Tail Wheel had broke off >> from a hard handing, and it damaged the elevator and rudder. Just >> the covering was damaged on the elevator, and the bottom of the >> rudder need the bottom tubing replaced. I have it almost finished, >> and just today I purchased a MicroAir 760 to install in a new dash >> I am working on... I did not like the drum brakes and I removed >> them and installed the Black Max 1000 system.... and to top it off >> I installed some wheel and tire combo that I have come up with...I >> have seen many people have the Carlisle golf cart tires on a 6" rim >> and call them Tundra Tires.... They are Heavy and Stiff, and the >> size is all I see that is close to being what is referred to as a >> Tundra Tire..... These Tires I have are Soft and only use between 5 ! > and 10 pounds of air, and they are Light Weight........... They act > like the Big Boys Tundra Tires in Alaska...... The Rims I have are > 8" in Diameter, and fit on Black Max and Hegar wheel hubs, and maybe > others..... Anyway I would like your input on what you think about > my Tire and Wheel Combo........ >> >> >> Kolb Firestar II >> Rotax 503 with Electric Start >> C-Box Re-Drive with a RK400 Clutch >> 68" Warp Drive Prop >> Black Max 1000 Hydraulic Brakes >> Tundra Tires on 8" x 9" Aluminum Rims >> Current in date BRS Ballistic Recovery Chute >> Kuntzleman Dual Magnum Strobes >> ELT (emergency locator transmitters) >> N-Numbered with a current Annual done May 2010 >> Soon to be Installed Micro Air 760 VHF TRANSCEIVER , >> And maybe later a 3 Blade Prop, because they make less noise > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=315110#315110 > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:11:23 PM PST US
    Subject: Re: Brake report
    From: "gotime242" <dylanshine@gmail.com>
    Hello, i dont mean to bring this up from the grave...but im curious as to how the axles that come in the kit are mounted onto the current FS landing gear. Are they a pretty easy replacement or do they require a bit of fabrication? I have a fs2 that could use a new brake setup... Read this topic online here: http://forums.matronics.com/viewtopic.php?p=315149#315149


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:52:18 PM PST US
    From: "Joe Lawson" <joe.a.lawson@gmail.com>
    Subject: Re: Brake report
    ------------Boundary-00=_LDQZKFN2QL8000000000--


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:13:13 PM PST US
    Subject: Re: Brake report
    From: "Carolina Flyer" <joe.a.lawson@gmail.com>
    Here is a Picture of my Kolb Firestar II with a different set of Wheels on the Black Max System...... If you buy extra wheel hubs you can change both tires in less than 5 minutes.... You remove a cotter pin then unscrew a Nylon Nut using a Ratchet and 15/16" Socket. Put the different set of Wheels on, replace the one nut and cotter pin, and your ready to Fly.... In this Picture I have 8" rims that have standard DOT approved Radial Trailer Tires... .. I use this set-up when I am using the paved Runway.......... When I am on a Grass Strip it is back to the Tundra Tires.......... Joe -------- Kolb Firestar II 503 C-Box / RK400 Clutch Phantom 503 B-Box Location : Buffalo South Carolina Read this topic online here: http://forums.matronics.com/viewtopic.php?p=315183#315183 Attachments: http://forums.matronics.com//files/dsc00430_large_139.jpg


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:43:45 PM PST US
    Subject: Re: landing video with no Kolb drop
    From: "Carolina Flyer" <joe.a.lawson@gmail.com>
    Ralph, That was a very nice Video. Was that taken with the passenger using a hand held Camcorder? Have you ever used a Camcorder mounted outside of the cockpit, like mounted on a Wing Strut or Boom Tube..........Joe -------- Kolb Firestar II 503 C-Box / RK400 Clutch Phantom 503 B-Box Location : Buffalo South Carolina Read this topic online here: http://forums.matronics.com/viewtopic.php?p=315185#315185




    Other Matronics Email List Services

  • Post A New Message
  •   kolb-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kolb-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kolb-list
  • Browse Kolb-List Digests
  •   http://www.matronics.com/digest/kolb-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --