---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Fri 03/04/11: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:52 AM - Re: Need Help with 582 rudder trim (Thom Riddle) 2. 05:35 AM - Re: Re: In Memoriam 2010 - Homer Kolb (Kolb Aircraft) 3. 05:40 AM - Re: Re: Need Help with 582 rudder trim (Mike Welch) 4. 10:31 AM - Re: Need Help with 582 rudder trim (Richard Pike) 5. 10:39 AM - Re: Re: Need Help with 582 rudder trim (william sullivan) 6. 01:29 PM - Re: Re: Need Help with 582 rudder trim (WhiskeyVictor36@aol.com) 7. 03:27 PM - Wanted - Plans for Kolb Ultrastar (Oxbyr) 8. 03:46 PM - Fw: Re: Need Help with 582 rudder trim (russ kinne) 9. 04:05 PM - Re: Wanted - Plans for Kolb Ultrastar (Dana Hague) ________________________________ Message 1 _____________________________________ Time: 04:52:51 AM PST US Subject: Kolb-List: Re: Need Help with 582 rudder trim From: "Thom Riddle" Rick, Rick, Now you've done it. VGs are so 20th century, we must all now install Gurney Flaps on our airplanes because it " increases lift by altering the Kutta condition at the trailing edge.[4][6] The wake behind the flap is a pair of counter-rotating vortices that are alternately shed in a von Krmn vortex street.[21] ". according to the wikipedia article. Who can resist a sales pitch like this? do not archive -------- Thom Riddle Buffalo, NY (9G0) Kolb Slingshot SS-021 Jabiru 2200A #1574 Tennessee Prop 64x32 Don't accept your dog's admiration as conclusive evidence that you are wonderful. Ann Landers Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332733#332733 ________________________________ Message 2 _____________________________________ Time: 05:35:11 AM PST US From: "Kolb Aircraft" Subject: Re: Kolb-List: Re: In Memoriam 2010 - Homer Kolb 8375 Russell Dyche HW London KY 40741 ----- Original Message ----- From: "Dennis Thate" Sent: Thursday, March 03, 2011 1:37 PM Subject: Kolb-List: Re: In Memoriam 2010 - Homer Kolb > > > kolbaircraft wrote: >> Thanks Dave >> >> Travis >> Kolb CO. >> >> --- > > > Travis, > > What is the current address for the Kolb Aircraft ? [Question] > > -------- > Both optimists and pessimists contribute to our society. The optimist > invents the airplane and the pessimist the parachute. ~Gil Stern > > > Faith is believing what you know ain't so - Mark Twain > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332653#332653 > > > ________________________________ Message 3 _____________________________________ Time: 05:40:01 AM PST US From: Mike Welch Subject: RE: Kolb-List: Re: Need Help with 582 rudder trim according to the wikipedia article. Who can resist a sales pitch like this? > > do not archive > > -------- > Thom Riddle Tomm=2C Hmmm=2C VGs? Let me guess. Mike Welch ________________________________ Message 4 _____________________________________ Time: 10:31:00 AM PST US Subject: Kolb-List: Re: Need Help with 582 rudder trim From: "Richard Pike" [quote="Mike Welch"]according to the wikipedia article. Who can resist a sales pitch like this? > > > -------- > Thom Riddle > Tomm, Hmmm, VGs? Let me guess. Mike Welch > [b] I know who can't: See attached pictures... Richard Pike MKIII 420P (420ldPoops) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332764#332764 Attachments: http://forums.matronics.com//files/vgs_3a_159.jpg http://forums.matronics.com//files/vgs_2a_177.jpg ________________________________ Message 5 _____________________________________ Time: 10:39:50 AM PST US From: william sullivan Subject: Re: Kolb-List: Re: Need Help with 582 rudder trim - Looks like somebody might be feeling a little light headed. - do not archive ------------------------- ------------------ Bill Sullivan --- On Fri, 3/4/11, Richard Pike wrote: I know who can't: See attached pictures... Richard Pike MKIII 420P (420ldPoops) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332764#332764 Attachments: http://forums.matronics.com//files/vgs_3a_159.jpg http://forums.matronics.com//files/vgs_2a_177.jpg le, List Admin. ________________________________ Message 6 _____________________________________ Time: 01:29:07 PM PST US From: WhiskeyVictor36@aol.com Subject: Re: Kolb-List: Re: Need Help with 582 rudder trim Maybe john h? In a message dated 3/4/2011 8:40:05 A.M. Eastern Standard Time, mdnanwelch7@hotmail.com writes: according to the wikipedia article. Who can resist a sales pitch like this? > > do not archive > > -------- > Thom Riddle Tomm, Hmmm, VGs? Let me guess. Mike Welch ________________________________ Message 7 _____________________________________ Time: 03:27:58 PM PST US Subject: Kolb-List: Wanted - Plans for Kolb Ultrastar From: "Oxbyr" Would any members be in a position to assist me in locating a set of detailed plans/drawings for the Kolb Ultrastar ? Many thanks in hopeful anticipation. Richard. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332807#332807 ________________________________ Message 8 _____________________________________ Time: 03:46:29 PM PST US From: russ kinne Subject: Fwd: Kolb-List: Re: Need Help with 582 rudder trim I thought it was only pretty girls that turned that head??? Begin forwarded message: > From: william sullivan > Date: March 4, 2011 1:34:30 PM EST > To: kolb-list@matronics.com > Subject: Re: Kolb-List: Re: Need Help with 582 rudder trim > > Looks like somebody might be feeling a little light headed. > > do not archive > Bill Sullivan > > --- On Fri, 3/4/11, Richard Pike wrote: > > > > I know who can't: See attached pictures... > > Richard Pike > MKIII 420P (420ldPoops) > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332764#332764 > > > > > Attachments: > > http://forums.matronics.com//files/vgs_3a_159.jpg > http://forums.matronics.com//files/vgs_2a_177.jpg > < --> > > > > > ________________________________ Message 9 _____________________________________ Time: 04:05:40 PM PST US From: Dana Hague Subject: Re: Kolb-List: Wanted - Plans for Kolb Ultrastar Try the files section of the kolbultrastar yahoo group: -Dana At 06:25 PM 3/4/2011, Oxbyr wrote: > >Would any members be in a position to assist me in locating a set >of detailed plans/drawings for the Kolb Ultrastar ? Many thanks in >hopeful anticipation. Richard. > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=332807#332807 > > -- Computers run on smoke. If it leaks out, they don't work. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.