---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sun 09/25/11: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:21 AM - Rotax 447 rubber carb socket (WhiskeyVictor36@aol.com) 2. 11:40 AM - Re: Rotax 447 rubber carb socket (209GS) 3. 11:41 AM - Re: Rotax 447 rubber carb socket (Jack) 4. 11:45 AM - Re: Rotax 447 rubber carb socket (John Hauck) 5. 11:49 AM - Re: Rotax 447 rubber carb socket (Stephen Spence) ________________________________ Message 1 _____________________________________ Time: 11:21:38 AM PST US From: WhiskeyVictor36@aol.com Subject: Kolb-List: Rotax 447 rubber carb socket Hi all, I am trying to find the source of a better quality rubber carb socket for my Rotax 447. Previously I've seen this remarked about on the list and I think it was a company named JDM. But I haven't found it in the archives nor on ebay, which is where it was supposedly advertised. Can anyone help? Bill Varnes Original Kolb FireStar Audubon NJ Do Not Archive ________________________________ Message 2 _____________________________________ Time: 11:40:24 AM PST US Subject: Kolb-List: Re: Rotax 447 rubber carb socket From: "209GS" http://jbmindustries.com/ROTAX.htm -------- Gerry Uebbing Firestar II 503 b-box (not flying yet) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353172#353172 ________________________________ Message 3 _____________________________________ Time: 11:41:42 AM PST US From: Jack Subject: Re: Kolb-List: Rotax 447 rubber carb socket On 9/25/2011 2:19 PM, WhiskeyVictor36@aol.com wrote: > Hi all, > I am trying to find the source of a better quality rubber carb socket > for my Rotax 447. Previously I've seen this remarked about on the > list and I think it was a company named JDM. But I haven't found it > in the archives nor on ebay, which is where it was supposedly > advertised. Can anyone help? > Bill Varnes > Original Kolb FireStar > Audubon NJ > Do Not Archive > *Try, JBMIndustries.com > > > * ________________________________ Message 4 _____________________________________ Time: 11:45:14 AM PST US From: "John Hauck" Subject: RE: Kolb-List: Rotax 447 rubber carb socket I am trying to find the source of a better quality rubber carb socket for my Rotax 447. Previously I've seen this remarked about on the list and I think it was a company named JDM. But I haven't found it in the archives nor on ebay, which is where it was supposedly advertised. Can anyone help? Bill Varnes Bill/Folks: Try this one: http://jbmindustries.com/ I bought their SS springs for my Titan Exhaust System. They were expensive, but they are much, much better quality than the standard spring. john h mkIII Rock House, Oregon ________________________________ Message 5 _____________________________________ Time: 11:49:23 AM PST US From: Stephen Spence Subject: Re: Kolb-List: Rotax 447 rubber carb socket This what I found:=0A=0A=0A________________________________=0A=0AHauck wrot e: << BTW: I took advice from the List and bought the SS exhaust =0Asprings from:=0Ahttp://jbmindustries.com/ROTAX.htm I installed them a couple days ago ... Only =0Aoperational hours will tell if they are as good as advertis ed. >>=0AKolb Friends =93=0AJBM also sells after-market replacement r ubber boots for the Bing carbs. =0AAnybody have experience with these? My 9 12 is due for new carb boots, and the =0ARotax boots are somewhat expensive . The JBM website claims that their =9Cexact =0Areplacement=9D part for this item will outlast the Rotax boot, at less than half =0Athe co st.=0AAm hoping someone on this List has bought these rubber boots from JBM , and can =0Acomment on their quality and longevity.=0AMany thanks =93=0ADennis Kirby=0AMark-III, 912ul, Powerfin-72=0A=C2-=0ASteve Spence =0AAuburn Hills, MI=0A=0A=0A=0A=0A________________________________=0AFrom: "WhiskeyVictor36@aol.com" =0ATo: kolb-list@matroni cs.com=0ASent: Sun, September 25, 2011 2:19:01 PM=0ASubject: Kolb-List: Rot ax 447 rubber carb socket=0A=0AHi all,=0A=0AI am trying to find the source of a better quality rubber carb socket for my =0ARotax 447.=C2- Previousl y I've seen this remarked about on the list and I think it =0Awas a company named JDM.=C2- But I haven't found it in the archives nor on ebay, =0Awh ich is where it was supposedly advertised.=C2- Can anyone help?=0A=0ABill ======== =0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.