Today's Message Index:
----------------------
1. 01:13 PM - Silicone heatsink compound (David Kulp)
2. 02:07 PM - Re: Silicone heatsink compound (Mike Welch)
3. 02:19 PM - Re: Silicone heatsink compound (Mike Welch)
4. 03:00 PM - Re: Silicone heatsink compound (frank goodnight)
5. 03:10 PM - Heat sink for spark plugs (frank goodnight)
6. 03:13 PM - Re: Heat sink for spark plugs (John Hauck)
7. 04:49 PM - Re: Silicone heatsink compound (frank goodnight)
8. 07:11 PM - Re: Silicone heatsink compound (chris davis)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Silicone heatsink compound |
Kolb owners,
I recently read the posts concerning anti-seize compound being old
school and that silicone heatsink compound should be used to better
transfer heat between the plugs and cylinder head. I got a good 10 tube
deal on eBay and will have enough for this life and the next with one 5g
tube, so I would like to send a tube to the first 9 emails that I get
with your name and address. All I want is assurance that you will use
some on your Kolb.
Get ready. Get set. GO!!!
Dave Kulp
Bethlehem, PA
FireFly 11DMK
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
I would like one!
Mike Welch
Sent from my iPad
On Jul 14, 2012, at 3:15 PM, "David Kulp" <undoctor@ptd.net> wrote:
>
> Kolb owners,
>
> I recently read the posts concerning anti-seize compound being old school and
that silicone heatsink compound should be used to better transfer heat between
the plugs and cylinder head. I got a good 10 tube deal on eBay and will have
enough for this life and the next with one 5g tube, so I would like to send
a tube to the first 9 emails that I get with your name and address. All I want
is assurance that you will use some on your Kolb.
>
> Get ready. Get set. GO!!!
>
> Dave Kulp
> Bethlehem, PA
> FireFly 11DMK
>
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
My address was sent direct in a separate email.
Mike
>
>>
>> Kolb owners,
>>
>> I recently read the posts concerning anti-seize compound being old school and
that silicone heatsink compound should be used to better transfer heat between
the plugs and cylinder head. I got a good 10 tube deal on eBay and will have
enough for this life and the next with one 5g tube, so I would like to send
a tube to the first 9 emails that I get with your name and address. All I want
is assurance that you will use some on your Kolb.
>>
>> Get ready. Get set. GO!!!
>>
>> Dave Kulp
>> Bethlehem, PA
>> FireFly 11DMK
>>
>>
>>
>>
>
>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
Hi Dave,
I would one, Thanks
Frank
3569 w Lonoke
Fayetteville , ARK 72704
________________________________
From: David Kulp <undoctor@ptd.net>
Sent: Sat, July 14, 2012 3:14:12 PM
Subject: Kolb-List: Silicone heatsink compound
Kolb owners,
I recently read the posts concerning anti-seize compound being old school and
that silicone heatsink compound should be used to better transfer heat between
the plugs and cylinder head. I got a good 10 tube deal on eBay and will have
enough for this life and the next with one 5g tube, so I would like to send a
tube to the first 9 emails that I get with your name and address. All I want is
assurance that you will use some on your Kolb.
Get ready. Get set. GO!!!
Dave Kulp
Bethlehem, PA
FireFly 11DMK
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Heat sink for spark plugs |
Question for KOLBERS.
Is the white stuff that we use to set the temp of our iron
when we heat srink fabric what we are talking about?
Frank
Firestar 2
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Heat sink for spark plugs |
Question for KOLBERS.
Is the white stuff that we use to set the temp of our iron
when we heat srink fabric what we are talking about?
Frank
Yep!
john h
mkIII
Titus, Alabama
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
Hi Dave,
Please give my tube to someone else that can use it. I just found out that I
have a tube.
Thanks for your answer John.
Fly safe
Frank
Do not archive
________________________________
From: David Kulp <undoctor@ptd.net>
Sent: Sat, July 14, 2012 3:14:12 PM
Subject: Kolb-List: Silicone heatsink compound
Kolb owners,
I recently read the posts concerning anti-seize compound being old school and
that silicone heatsink compound should be used to better transfer heat between
the plugs and cylinder head. I got a good 10 tube deal on eBay and will have
enough for this life and the next with one 5g tube, so I would like to send a
tube to the first 9 emails that I get with your name and address. All I want is
assurance that you will use some on your Kolb.
Get ready. Get set. GO!!!
Dave Kulp
Bethlehem, PA
FireFly 11DMK
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
DAVE I could use a tube I am soon to cover my FIREFLY- and need to set up
the iron , i havent cover any thing since my KOLB KXP in 1992 my address i
s chris davis box 586 , west chatham ma. 02669 .,, thank you very much that
stuff is hard to find and expensive around here . Chris=0AChris Davis=0AKX
P 503 492 hrs=0AGlider Pilot=0ADisabled from crash building Firefly=0A=0A
=0A________________________________=0AFrom: David Kulp <undoctor@ptd.net>
=0ATo: kolb-list@matronics.com =0ASent: Saturday, July 14, 2012 4:13 PM=0AS
ubject: Kolb-List: Silicone heatsink compound=0A=0A--> Kolb-List message po
sted by: David Kulp <undoctor@ptd.net>=0A=0AKolb owners,=0A=0AI recently re
ad the posts concerning anti-seize compound being old school and that silic
one heatsink compound should be used to better transfer heat between the pl
ugs and cylinder head.- I got a good 10 tube deal on eBay and will have e
nough for this life and the next with one 5g tube, so I would like to send
a tube to the first 9 emails that I get with your name and address.- All
I want is assurance that you will use some on your Kolb.=0A=0AGet ready.-
-========================
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|